[PATCH] use generic hardirq code on SH

[Christoph Hellwig]

--- 1.35/arch/sh/Kconfig	2005-01-15 23:31:06 +01:00
+++ edited/arch/sh/Kconfig	2005-01-21 18:11:39 +01:00
@@ -29,6 +29,14 @@
 	bool
 	default y
 
+config GENERIC_HARDIRQS
+	bool
+	default y
+
+config GENERIC_IRQ_PROBE
+	bool
+	default y
+
 source "init/Kconfig"
 
 menu "System type"
--- 1.21/arch/sh/kernel/irq.c	2004-10-20 10:37:14 +02:00
+++ edited/arch/sh/kernel/irq.c	2005-01-21 18:16:16 +01:00
@@ -40,58 +40,17 @@
 #include <asm/irq.h>
 #include <linux/irq.h>
 
-/*
- * Controller mappings for all interrupt sources:
- */
-irq_desc_t irq_desc[NR_IRQS] __cacheline_aligned = {
-	[0 ... NR_IRQS-1] = {
-		.handler = &no_irq_type,
-		.lock = SPIN_LOCK_UNLOCKED
-	}
-};
-
-/*
- * Special irq handlers.
- */
 
-irqreturn_t no_action(int cpl, void *dev_id, struct pt_regs *regs)
-{ return IRQ_NONE; }
-
-/*
- * Generic no controller code
- */
-
-static void enable_none(unsigned int irq) { }
-static unsigned int startup_none(unsigned int irq) { return 0; }
-static void disable_none(unsigned int irq) { }
-static void ack_none(unsigned int irq)
-{
 /*
  * 'what should we do if we get a hw irq event on an illegal vector'.
  * each architecture has to answer this themselves, it doesn't deserve
  * a generic callback i think.
  */
+void ack_bad_irq(unsigned int irq)
+{
 	printk("unexpected IRQ trap at vector %02x\n", irq);
 }
 
-/* startup is the same as "enable", shutdown is same as "disable" */
-#define shutdown_none	disable_none
-#define end_none	enable_none
-
-struct hw_interrupt_type no_irq_type = {
-	"none",
-	startup_none,
-	shutdown_none,
-	enable_none,
-	disable_none,
-	ack_none,
-	end_none
-};
-
-/*
- * Generic, controller-independent functions:
- */
-
 #if defined(CONFIG_PROC_FS)
 int show_interrupts(struct seq_file *p, void *v)
 {
@@ -127,210 +86,13 @@
 }
 #endif
 
-/*
- * This should really return information about whether
- * we should do bottom half handling etc. Right now we
- * end up _always_ checking the bottom half, which is a
- * waste of time and is not what some drivers would
- * prefer.
- */
-int handle_IRQ_event(unsigned int irq, struct pt_regs * regs, struct irqaction * action)
-{
-	int status = 1;	/* Force the "do bottom halves" bit */
-	int ret, retval = 0;
-
-	if (!(action->flags & SA_INTERRUPT))
-		local_irq_enable();
-
-	do {
-		ret = action->handler(irq, action->dev_id, regs);
-		if (ret == IRQ_HANDLED)
-			status |= action->flags;
-		retval |= ret;
-		action = action->next;
-	} while (action);
-
-	if (status & SA_SAMPLE_RANDOM)
-		add_interrupt_randomness(irq);
-
-	local_irq_disable();
-	return retval;
-}
-
-static void __report_bad_irq(int irq, irq_desc_t *desc, irqreturn_t action_ret)
-{
-	struct irqaction *action;
-
-	if (action_ret != IRQ_HANDLED && action_ret != IRQ_NONE) {
-		printk(KERN_ERR "irq event %d: bogus return value %x\n",
-				irq, action_ret);
-	} else {
-		printk(KERN_ERR "irq %d: nobody cared!\n", irq);
-	}
-	dump_stack();
-	printk(KERN_ERR "handlers:\n");
-	action = desc->action;
-	do {
-		printk(KERN_ERR "[<%p>]", action->handler);
-		print_symbol(" (%s)",
-			(unsigned long)action->handler);
-		printk("\n");
-		action = action->next;
-	} while (action);
-}
-
-static void report_bad_irq(int irq, irq_desc_t *desc, irqreturn_t action_ret)
-{
-	static int count = 100;
-
-	if (count) {
-		count--;
-		__report_bad_irq(irq, desc, action_ret);
-	}
-}
-
-static int noirqdebug;
-
-static int __init noirqdebug_setup(char *str)
-{
-	noirqdebug = 1;
-	printk("IRQ lockup detection disabled\n");
-	return 1;
-}
-
-__setup("noirqdebug", noirqdebug_setup);
-
-/*
- * If 99,900 of the previous 100,000 interrupts have not been handled then
- * assume that the IRQ is stuck in some manner.  Drop a diagnostic and try to
- * turn the IRQ off.
- *
- * (The other 100-of-100,000 interrupts may have been a correctly-functioning
- *  device sharing an IRQ with the failing one)
- *
- * Called under desc->lock
- */
-static void note_interrupt(int irq, irq_desc_t *desc, irqreturn_t action_ret)
-{
-	if (action_ret != IRQ_HANDLED) {
-		desc->irqs_unhandled++;
-		if (action_ret != IRQ_NONE)
-			report_bad_irq(irq, desc, action_ret);
-	}
-
-	desc->irq_count++;
-	if (desc->irq_count < 100000)
-		return;
-
-	desc->irq_count = 0;
-	if (desc->irqs_unhandled > 99900) {
-		/*
-		 * The interrupt is stuck
-		 */
-		__report_bad_irq(irq, desc, action_ret);
-		/*
-		 * Now kill the IRQ
-		 */
-		printk(KERN_EMERG "Disabling IRQ #%d\n", irq);
-		desc->status |= IRQ_DISABLED;
-		desc->handler->disable(irq);
-	}
-	desc->irqs_unhandled = 0;
-}
-
-/*
- * Generic enable/disable code: this just calls
- * down into the PIC-specific version for the actual
- * hardware disable after having gotten the irq
- * controller lock. 
- */
-inline void disable_irq_nosync(unsigned int irq)
-{
-	irq_desc_t *desc = irq_desc + irq;
-	unsigned long flags;
-
-	spin_lock_irqsave(&desc->lock, flags);
-	if (!desc->depth++) {
-		desc->status |= IRQ_DISABLED;
-		desc->handler->disable(irq);
-	}
-	spin_unlock_irqrestore(&desc->lock, flags);
-}
-
-/*
- * Synchronous version of the above, making sure the IRQ is
- * no longer running on any other IRQ..
- */
-void disable_irq(unsigned int irq)
-{
-	irq_desc_t *desc = irq_desc + irq;
-	disable_irq_nosync(irq);
-	if (desc->action)
-		synchronize_irq(irq);
-}
-
-void enable_irq(unsigned int irq)
-{
-	irq_desc_t *desc = irq_desc + irq;
-	unsigned long flags;
-
-	spin_lock_irqsave(&desc->lock, flags);
-	switch (desc->depth) {
-	case 1: {
-		unsigned int status = desc->status & ~(IRQ_DISABLED | IRQ_INPROGRESS);
-		desc->status = status;
-		if ((status & (IRQ_PENDING | IRQ_REPLAY)) == IRQ_PENDING) {
-			desc->status = status | IRQ_REPLAY;
-			hw_resend_irq(desc->handler,irq);
-		}
-		desc->handler->enable(irq);
-		/* fall-through */
-	}
-	default:
-		desc->depth--;
-		break;
-	case 0:
-		printk("enable_irq() unbalanced from %p\n",
-		       __builtin_return_address(0));
-	}
-	spin_unlock_irqrestore(&desc->lock, flags);
-}
-
-/*
- * do_IRQ handles all normal device IRQ's.
- */
 asmlinkage int do_IRQ(unsigned long r4, unsigned long r5,
 		      unsigned long r6, unsigned long r7,
 		      struct pt_regs regs)
 {	
-	/* 
-	 * We ack quickly, we don't want the irq controller
-	 * thinking we're snobs just because some other CPU has
-	 * disabled global interrupts (we have already done the
-	 * INT_ACK cycles, it's too late to try to pretend to the
-	 * controller that we aren't taking the interrupt).
-	 *
-	 * 0 return value means that this irq is already being
-	 * handled by some other CPU. (or is disabled)
-	 */
 	int irq;
-	irq_desc_t *desc;
-	struct irqaction * action;
-	unsigned int status;
 
 	irq_enter();
-
-#ifdef CONFIG_PREEMPT
-	/*
-	 * At this point we're now about to actually call handlers,
-	 * and interrupts might get reenabled during them... bump
-	 * preempt_count to prevent any preemption while the handler
-	 * called here is pending...
-	 */
-	preempt_disable();
-#endif
-
-	/* Get IRQ number */
 	asm volatile("stc	r2_bank, %0\n\t"
 		     "shlr2	%0\n\t"
 		     "shlr2	%0\n\t"
@@ -338,394 +100,7 @@
 		     "add	#-16, %0\n\t"
 		     :"=z" (irq));
 	irq = irq_demux(irq);
-
-	kstat_this_cpu.irqs[irq]++;
-	desc = irq_desc + irq;
-	spin_lock(&desc->lock);
-	desc->handler->ack(irq);
-	/*
-	   REPLAY is when Linux resends an IRQ that was dropped earlier
-	   WAITING is used by probe to mark irqs that are being tested
-	   */
-	status = desc->status & ~(IRQ_REPLAY | IRQ_WAITING);
-	status |= IRQ_PENDING; /* we _want_ to handle it */
-
-	/*
-	 * If the IRQ is disabled for whatever reason, we cannot
-	 * use the action we have.
-	 */
-	action = NULL;
-	if (likely(!(status & (IRQ_DISABLED | IRQ_INPROGRESS)))) {
-		action = desc->action;
-		status &= ~IRQ_PENDING; /* we commit to handling */
-		status |= IRQ_INPROGRESS; /* we are handling it */
-	}
-	desc->status = status;
-
-	/*
-	 * If there is no IRQ handler or it was disabled, exit early.
-	   Since we set PENDING, if another processor is handling
-	   a different instance of this same irq, the other processor
-	   will take care of it.
-	 */
-	if (unlikely(!action))
-		goto out;
-
-	/*
-	 * Edge triggered interrupts need to remember
-	 * pending events.
-	 * This applies to any hw interrupts that allow a second
-	 * instance of the same irq to arrive while we are in do_IRQ
-	 * or in the handler. But the code here only handles the _second_
-	 * instance of the irq, not the third or fourth. So it is mostly
-	 * useful for irq hardware that does not mask cleanly in an
-	 * SMP environment.
-	 */
-	for (;;) {
-		irqreturn_t action_ret;
-
-		spin_unlock(&desc->lock);
-		action_ret = handle_IRQ_event(irq, &regs, action);
-		spin_lock(&desc->lock);
-		if (!noirqdebug)
-			note_interrupt(irq, desc, action_ret);
-		if (likely(!(desc->status & IRQ_PENDING)))
-			break;
-		desc->status &= ~IRQ_PENDING;
-	}
-	desc->status &= ~IRQ_INPROGRESS;
-
-out:
-	/*
-	 * The ->end() handler has to deal with interrupts which got
-	 * disabled while the handler was running.
-	 */
-	desc->handler->end(irq);
-	spin_unlock(&desc->lock);
-
+	__do_IRQ(irq, &regs);
 	irq_exit();
-
-#ifdef CONFIG_PREEMPT
-	/*
-	 * We're done with the handlers, interrupts should be
-	 * currently disabled; decrement preempt_count now so
-	 * as we return preemption may be allowed...
-	 */
-	preempt_enable_no_resched();
-#endif
-
 	return 1;
 }
-
-int request_irq(unsigned int irq, 
-		irqreturn_t (*handler)(int, void *, struct pt_regs *),
-		unsigned long irqflags, 
-		const char * devname,
-		void *dev_id)
-{
-	int retval;
-	struct irqaction * action;
-
-	if (irq >= ACTUAL_NR_IRQS)
-		return -EINVAL;
-	if (!handler)
-		return -EINVAL;
-
-	action = (struct irqaction *)
-			kmalloc(sizeof(struct irqaction), GFP_ATOMIC);
-	if (!action)
-		return -ENOMEM;
-
-	action->handler = handler;
-	action->flags = irqflags;
-	cpus_clear(action->mask);
-	action->name = devname;
-	action->next = NULL;
-	action->dev_id = dev_id;
-
-	retval = setup_irq(irq, action);
-	if (retval)
-		kfree(action);
-	return retval;
-}
-
-EXPORT_SYMBOL(request_irq);
-
-void free_irq(unsigned int irq, void *dev_id)
-{
-	irq_desc_t *desc;
-	struct irqaction **p;
-	unsigned long flags;
-
-	if (irq >= ACTUAL_NR_IRQS)
-		return;
-
-	desc = irq_desc + irq;
-	spin_lock_irqsave(&desc->lock,flags);
-	p = &desc->action;
-	for (;;) {
-		struct irqaction * action = *p;
-		if (action) {
-			struct irqaction **pp = p;
-			p = &action->next;
-			if (action->dev_id != dev_id)
-				continue;
-
-			/* Found it - now remove it from the list of entries */
-			*pp = action->next;
-			if (!desc->action) {
-				desc->status |= IRQ_DISABLED;
-				desc->handler->shutdown(irq);
-			}
-			spin_unlock_irqrestore(&desc->lock,flags);
-			synchronize_irq(irq);
-			kfree(action);
-			return;
-		}
-		printk("Trying to free free IRQ%d\n",irq);
-		spin_unlock_irqrestore(&desc->lock,flags);
-		return;
-	}
-}
-
-EXPORT_SYMBOL(free_irq);
-
-static DECLARE_MUTEX(probe_sem);
-
-/*
- * IRQ autodetection code..
- *
- * This depends on the fact that any interrupt that
- * comes in on to an unassigned handler will get stuck
- * with "IRQ_WAITING" cleared and the interrupt
- * disabled.
- */
-unsigned long probe_irq_on(void)
-{
-	unsigned int i;
-	irq_desc_t *desc;
-	unsigned long val;
-	unsigned long delay;
-
-	down(&probe_sem);
-	/* 
-	 * something may have generated an irq long ago and we want to
-	 * flush such a longstanding irq before considering it as spurious. 
-	 */
-	for (i = NR_IRQS-1; i > 0; i--) {
-		desc = irq_desc + i;
-
-		spin_lock_irq(&desc->lock);
-		if (!desc->action)
-			desc->handler->startup(i);
-		spin_unlock_irq(&desc->lock);
-	}
-
-	/* Wait for longstanding interrupts to trigger. */
-	for (delay = jiffies + HZ/50; time_after(delay, jiffies); )
-		/* about 20ms delay */ barrier();
-
-	/*
-	 * enable any unassigned irqs
-	 * (we must startup again here because if a longstanding irq
-	 * happened in the previous stage, it may have masked itself)
-	 */
-	for (i = NR_IRQS-1; i > 0; i--) {
-		desc = irq_desc + i;
-
-		spin_lock_irq(&desc->lock);
-		if (!desc->action) {
-			desc->status |= IRQ_AUTODETECT | IRQ_WAITING;
-			if (desc->handler->startup(i))
-				desc->status |= IRQ_PENDING;
-		}
-		spin_unlock_irq(&desc->lock);
-	}
-
-	/*
-	 * Wait for spurious interrupts to trigger
-	 */
-	for (delay = jiffies + HZ/10; time_after(delay, jiffies); )
-		/* about 100ms delay */ barrier();
-
-	/*
-	 * Now filter out any obviously spurious interrupts
-	 */
-	val = 0;
-	for (i=0; i<NR_IRQS; i++) {
-		unsigned int status;
-
-		desc = irq_desc + i;
-
-		spin_lock_irq(&desc->lock);
-		status = desc->status;
-
-		if (status & IRQ_AUTODETECT) {
-			/* It triggered already - consider it spurious. */
-			if (!(status & IRQ_WAITING)) {
-				desc->status = status & ~IRQ_AUTODETECT;
-				desc->handler->shutdown(i);
-			} else
-				if (i < 32)
-					val |= 1 << i;
-		}
-		spin_unlock_irq(&desc->lock);
-	}
-
-	return val;
-}
-
-EXPORT_SYMBOL(probe_irq_on);
-
-/* Return a mask of triggered interrupts (this
- * can handle only legacy ISA interrupts).
- */
-
-/*
- *	probe_irq_mask - scan a bitmap of interrupt lines
- *	@val:	mask of interrupts to consider
- *
- *	Scan the ISA bus interrupt lines and return a bitmap of
- *	active interrupts. The interrupt probe logic state is then
- *	returned to its previous value.
- *
- *	Note: we need to scan all the irq's even though we will
- *	only return ISA irq numbers - just so that we reset them
- *	all to a known state.
- */
-unsigned int probe_irq_mask(unsigned long val)
-{
-	int i;
-	unsigned int mask;
-
-	mask = 0;
-	for (i = 0; i < NR_IRQS; i++) {
-		irq_desc_t *desc = irq_desc + i;
-		unsigned int status;
-
-		spin_lock_irq(&desc->lock);
-		status = desc->status;
-
-		if (status & IRQ_AUTODETECT) {
-			if (i < 16 && !(status & IRQ_WAITING))
-				mask |= 1 << i;
-
-			desc->status = status & ~IRQ_AUTODETECT;
-			desc->handler->shutdown(i);
-		}
-		spin_unlock_irq(&desc->lock);
-	}
-	up(&probe_sem);
-
-	return mask & val;
-}
-
-int probe_irq_off(unsigned long val)
-{
-	int i, irq_found, nr_irqs;
-
-	nr_irqs = 0;
-	irq_found = 0;
-	for (i=0; i<NR_IRQS; i++) {
-		irq_desc_t *desc = irq_desc + i;
-		unsigned int status;
-
-		spin_lock_irq(&desc->lock);
-		status = desc->status;
-
-		if (status & IRQ_AUTODETECT) {
-			if (!(status & IRQ_WAITING)) {
-				if (!nr_irqs)
-					irq_found = i;
-				nr_irqs++;
-			}
-			desc->status = status & ~IRQ_AUTODETECT;
-			desc->handler->shutdown(i);
-		}
-		spin_unlock_irq(&desc->lock);
-	}
-	up(&probe_sem);
-
-	if (nr_irqs > 1)
-		irq_found = -irq_found;
-	return irq_found;
-}
-
-EXPORT_SYMBOL(probe_irq_off);
-
-int setup_irq(unsigned int irq, struct irqaction * new)
-{
-	int shared = 0;
-	struct irqaction *old, **p;
-	unsigned long flags;
-	irq_desc_t *desc = irq_desc + irq;
-
-	if (desc->handler == &no_irq_type)
-		return -ENOSYS;
- 	/*
-	 * Some drivers like serial.c use request_irq() heavily,
-	 * so we have to be careful not to interfere with a
-	 * running system.
-	 */
-	if (new->flags & SA_SAMPLE_RANDOM) {
-		/*
-		 * This function might sleep, we want to call it first,
-		 * outside of the atomic block.
-		 * Yes, this might clear the entropy pool if the wrong
-		 * driver is attempted to be loaded, without actually
-		 * installing a new handler, but is this really a problem,
-		 * only the sysadmin is able to do this.
-		 */
-		rand_initialize_irq(irq);
-	}
-
-	/*
-	 * The following block of code has to be executed atomically
-	 */
-	spin_lock_irqsave(&desc->lock,flags);
-	p = &desc->action;
-	if ((old = *p) != NULL) {
-		/* Can't share interrupts unless both agree to */
-		if (!(old->flags & new->flags & SA_SHIRQ)) {
-			spin_unlock_irqrestore(&desc->lock,flags);
-			return -EBUSY;
-		}
-
-		/* add new interrupt at end of irq queue */
-		do {
-			p = &old->next;
-			old = *p;
-		} while (old);
-		shared = 1;
-	}
-
-	*p = new;
-
-	if (!shared) {
-		desc->depth = 0;
-		desc->status &= ~(IRQ_DISABLED | IRQ_AUTODETECT | IRQ_WAITING | IRQ_INPROGRESS);
-		desc->handler->startup(irq);
-	}
-	spin_unlock_irqrestore(&desc->lock,flags);
-	return 0;
-}
-
-#if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL)
-
-void init_irq_proc(void)
-{
-}
-#endif
-
-/* Taken from the 2.5 alpha port */
-#ifdef CONFIG_SMP
-void synchronize_irq(unsigned int irq)
-{
-	/* is there anything to synchronize with? */
-	if (!irq_desc[irq].action)
-		return;
-
-	while (irq_desc[irq].status & IRQ_INPROGRESS)
-		barrier();
-}
-#endif
--- 1.9/include/asm-sh/hardirq.h	2005-01-05 03:48:11 +01:00
+++ edited/include/asm-sh/hardirq.h	2005-01-21 18:14:08 +01:00
@@ -23,4 +23,6 @@
 # error HARDIRQ_BITS is too low!
 #endif
 
+extern void ack_bad_irq(unsigned int irq);
+
 #endif /* __ASM_SH_HARDIRQ_H */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/