[2.6 patch] prism54: misc cleanups
From: Adrian Bunk
Date: Wed Feb 02 2005 - 15:09:38 EST
This patch makes some functions in prism54 that are only required
locally static.
As a side effect it turned out that the mgt_unlatch_all function was
completely unused, and it's therefore #if 0'ed.
I also considered moving display_buffer as static inline into
islpci_mgt.h, but I wasn't 100% sure and therefore left it.
Signed-off-by: Adrian Bunk <bunk@xxxxxxxxx>
---
This patch was already sent on:
- 20 Dec 2004
drivers/net/wireless/prism54/isl_ioctl.c | 32 +++++++++++-------
drivers/net/wireless/prism54/isl_ioctl.h | 5 --
drivers/net/wireless/prism54/islpci_dev.c | 5 +-
drivers/net/wireless/prism54/islpci_dev.h | 2 -
drivers/net/wireless/prism54/islpci_mgt.c | 2 +
drivers/net/wireless/prism54/oid_mgt.c | 38 +---------------------
drivers/net/wireless/prism54/oid_mgt.h | 4 --
7 files changed, 28 insertions(+), 60 deletions(-)
--- linux-2.6.10-rc1-mm2-full/drivers/net/wireless/prism54/isl_ioctl.h.old 2004-10-30 06:52:18.000000000 +0200
+++ linux-2.6.10-rc1-mm2-full/drivers/net/wireless/prism54/isl_ioctl.h 2004-10-30 07:02:58.000000000 +0200
@@ -41,15 +41,10 @@
void prism54_wpa_ie_init(islpci_private *priv);
void prism54_wpa_ie_clean(islpci_private *priv);
-void prism54_wpa_ie_add(islpci_private *priv, u8 *bssid,
- u8 *wpa_ie, size_t wpa_ie_len);
-size_t prism54_wpa_ie_get(islpci_private *priv, u8 *bssid, u8 *wpa_ie);
int prism54_set_mac_address(struct net_device *, void *);
int prism54_ioctl(struct net_device *, struct ifreq *, int);
-int prism54_set_wpa(struct net_device *, struct iw_request_info *,
- __u32 *, char *);
extern const struct iw_handler_def prism54_handler_def;
--- linux-2.6.10-rc1-mm2-full/drivers/net/wireless/prism54/isl_ioctl.c.old 2004-10-30 06:43:10.000000000 +0200
+++ linux-2.6.10-rc1-mm2-full/drivers/net/wireless/prism54/isl_ioctl.c 2004-10-30 07:11:26.000000000 +0200
@@ -36,6 +36,14 @@
#include <net/iw_handler.h> /* New driver API */
+
+static void prism54_wpa_ie_add(islpci_private *priv, u8 *bssid,
+ u8 *wpa_ie, size_t wpa_ie_len);
+static size_t prism54_wpa_ie_get(islpci_private *priv, u8 *bssid, u8 *wpa_ie);
+static int prism54_set_wpa(struct net_device *, struct iw_request_info *,
+ __u32 *, char *);
+
+
/**
* prism54_mib_mode_helper - MIB change mode helper function
* @mib: the &struct islpci_mib object to modify
@@ -47,7 +55,7 @@
* Wireless API modes to Device firmware modes. It also checks for
* correct valid Linux wireless modes.
*/
-int
+static int
prism54_mib_mode_helper(islpci_private *priv, u32 iw_mode)
{
u32 config = INL_CONFIG_MANUALRUN;
@@ -647,7 +655,7 @@
return current_ev;
}
-int
+static int
prism54_get_scan(struct net_device *ndev, struct iw_request_info *info,
struct iw_point *dwrq, char *extra)
{
@@ -1582,7 +1590,7 @@
#define MAC2STR(a) (a)[0], (a)[1], (a)[2], (a)[3], (a)[4], (a)[5]
#define MACSTR "%02x:%02x:%02x:%02x:%02x:%02x"
-void
+static void
prism54_wpa_ie_add(islpci_private *priv, u8 *bssid,
u8 *wpa_ie, size_t wpa_ie_len)
{
@@ -1649,7 +1657,7 @@
up(&priv->wpa_sem);
}
-size_t
+static size_t
prism54_wpa_ie_get(islpci_private *priv, u8 *bssid, u8 *wpa_ie)
{
struct list_head *ptr;
@@ -1736,7 +1744,7 @@
}
}
-int
+static int
prism54_process_trap_helper(islpci_private *priv, enum oid_num_t oid,
char *data)
{
@@ -2314,7 +2322,7 @@
return ret;
}
-int
+static int
prism54_set_wpa(struct net_device *ndev, struct iw_request_info *info,
__u32 * uwrq, char *extra)
{
@@ -2358,7 +2366,7 @@
return 0;
}
-int
+static int
prism54_get_wpa(struct net_device *ndev, struct iw_request_info *info,
__u32 * uwrq, char *extra)
{
@@ -2367,7 +2375,7 @@
return 0;
}
-int
+static int
prism54_set_prismhdr(struct net_device *ndev, struct iw_request_info *info,
__u32 * uwrq, char *extra)
{
@@ -2380,7 +2388,7 @@
return 0;
}
-int
+static int
prism54_get_prismhdr(struct net_device *ndev, struct iw_request_info *info,
__u32 * uwrq, char *extra)
{
@@ -2389,7 +2397,7 @@
return 0;
}
-int
+static int
prism54_debug_oid(struct net_device *ndev, struct iw_request_info *info,
__u32 * uwrq, char *extra)
{
@@ -2401,7 +2409,7 @@
return 0;
}
-int
+static int
prism54_debug_get_oid(struct net_device *ndev, struct iw_request_info *info,
struct iw_point *data, char *extra)
{
@@ -2437,7 +2445,7 @@
return ret;
}
-int
+static int
prism54_debug_set_oid(struct net_device *ndev, struct iw_request_info *info,
struct iw_point *data, char *extra)
{
--- linux-2.6.10-rc1-mm2-full/drivers/net/wireless/prism54/islpci_dev.h.old 2004-10-30 06:58:23.000000000 +0200
+++ linux-2.6.10-rc1-mm2-full/drivers/net/wireless/prism54/islpci_dev.h 2004-10-30 07:04:02.000000000 +0200
@@ -211,8 +211,6 @@
priv->device_base);
}
-struct net_device_stats *islpci_statistics(struct net_device *);
-
int islpci_free_memory(islpci_private *);
struct net_device *islpci_setup(struct pci_dev *);
#endif /* _ISLPCI_DEV_H */
--- linux-2.6.10-rc1-mm2-full/drivers/net/wireless/prism54/islpci_dev.c.old 2004-10-30 06:46:08.000000000 +0200
+++ linux-2.6.10-rc1-mm2-full/drivers/net/wireless/prism54/islpci_dev.c 2004-10-30 07:12:13.000000000 +0200
@@ -44,6 +44,7 @@
static int prism54_bring_down(islpci_private *);
static int islpci_alloc_memory(islpci_private *);
+static struct net_device_stats *islpci_statistics(struct net_device *);
/* Temporary dummy MAC address to use until firmware is loaded.
* The idea there is that some tools (such as nameif) may query
@@ -52,7 +53,7 @@
* Of course, this is not the final/real MAC address. It doesn't
* matter, as you are suppose to be able to change it anytime via
* ndev->set_mac_address. Jean II */
-const unsigned char dummy_mac[6] = { 0x00, 0x30, 0xB4, 0x00, 0x00, 0x00 };
+static const unsigned char dummy_mac[6] = { 0x00, 0x30, 0xB4, 0x00, 0x00, 0x00 };
static int
isl_upload_firmware(islpci_private *priv)
@@ -607,7 +608,7 @@
return rc;
}
-struct net_device_stats *
+static struct net_device_stats *
islpci_statistics(struct net_device *ndev)
{
islpci_private *priv = netdev_priv(ndev);
--- linux-2.6.10-rc1-mm2-full/drivers/net/wireless/prism54/islpci_mgt.c.old 2004-10-30 06:46:45.000000000 +0200
+++ linux-2.6.10-rc1-mm2-full/drivers/net/wireless/prism54/islpci_mgt.c 2004-10-30 07:15:39.000000000 +0200
@@ -44,6 +44,7 @@
/******************************************************************************
Driver general functions
******************************************************************************/
+#if VERBOSE > SHOW_ERROR_MESSAGES
void
display_buffer(char *buffer, int length)
{
@@ -58,6 +59,7 @@
printk("\n");
}
+#endif
/*****************************************************************************
Queue handling for management frames
--- linux-2.6.10-rc1-mm2-full/drivers/net/wireless/prism54/oid_mgt.h.old 2004-10-30 07:05:55.000000000 +0200
+++ linux-2.6.10-rc1-mm2-full/drivers/net/wireless/prism54/oid_mgt.h 2004-10-30 07:42:02.000000000 +0200
@@ -28,8 +28,7 @@
void mgt_clean(islpci_private *);
-/* I don't know where to put these 3 */
-extern const int frequency_list_bg[];
+/* I don't know where to put these 2 */
extern const int frequency_list_a[];
int channel_of_freq(int);
@@ -49,7 +48,6 @@
void mgt_get(islpci_private *, enum oid_num_t, void *);
int mgt_commit(islpci_private *);
-void mgt_unlatch_all(islpci_private *);
int mgt_mlme_answer(islpci_private *);
--- linux-2.6.10-rc3-mm1-full/drivers/net/wireless/prism54/oid_mgt.c.old 2004-12-20 01:03:44.000000000 +0100
+++ linux-2.6.10-rc3-mm1-full/drivers/net/wireless/prism54/oid_mgt.c 2004-12-20 01:05:31.000000000 +0100
@@ -24,8 +24,8 @@
#include "isl_ioctl.h"
/* to convert between channel and freq */
-const int frequency_list_bg[] = { 2412, 2417, 2422, 2427, 2432, 2437, 2442,
- 2447, 2452, 2457, 2462, 2467, 2472, 2484
+static const int frequency_list_bg[] = { 2412, 2417, 2422, 2427, 2432,
+ 2437, 2442, 2447, 2452, 2457, 2462, 2467, 2472, 2484
};
int
@@ -730,6 +730,7 @@
*
* The way to do this is to set ESSID. Note though that they may get
* unlatch before though by setting another OID. */
+#if 0
void
mgt_unlatch_all(islpci_private *priv)
{
@@ -756,6 +757,7 @@
if (rvalue)
printk(KERN_DEBUG "%s: Unlatching OIDs failed\n", priv->ndev->name);
}
+#endif
/* This will tell you if you are allowed to answer a mlme(ex) request .*/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/