Re: [PATCH] Dynamic tick, version 050127-1

[George Anzinger]

Pavel Machek wrote:
> Hi!
>
>
> > > I do have CONFIG_X86_PM_TIMER enabled, but it seems by board does not
> > > have such piece of hardware:
> > >
> > > pavel@amd:/usr/src/linux-mm$ dmesg | grep -i "time\|tick\|apic"
> > > PCI: Setting latency timer of device 0000:00:11.5 to 64
> > > pavel@amd:/usr/src/linux-mm$ 
> >
> > If you are sure that machine supports ACPI, maybe this is your problem
> > (from the POSIX high res timer patch):
> >
> >          If you enable the ACPI pm timer and it cannot be found, it is
> >          possible that your BIOS is not producing the ACPI table or
> >          that your machine does not support ACPI.  In the former case,
> >          see "Default ACPI pm timer address".  If the timer is not
> >          found the boot will fail when trying to calibrate the 'delay'
> >          loop.
>
>
> Well, but how do I get the address? I'll try looking at BIOS
> options...
> 								Pavel
In my machine, if I turned off the PM code (in the BIOS) (or possibly turning on 
the ACPI, again in the BIOS) it did produce the address.  Booting then would put 
that address in the dmesg file.  You can then change the BIOS back to what it 
was and use the address found in the dmesg file.
--
George Anzinger   george@xxxxxxxxxx
High-res-timers:  http://sourceforge.net/projects/high-res-timers/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/