Re: radeonfb blanks my monitor

[Benjamin Herrenschmidt]

On Thu, 2005-03-03 at 01:39 -0300, Frédéric L. W. Meunier wrote:
> On Thu, 3 Mar 2005, Benjamin Herrenschmidt wrote:
> 
> > On Wed, 2005-03-02 at 23:51 -0300, Frédéric L. W. Meunier wrote:
> >> I just replaced my Matrox G400 with a Jetway Radeon 9600LE
> >> (256Mb). If I run 'modprobe radeonfb', the monitor blanks out
> >> and the power on light keeps flashing.
> >>
> >> What may be wrong ? Using 2.6.11.
> >
> > Do you have a way to capture the dmesg log produced ?
> 
> These are the lines before I have to use SysRq.
> 
> Mar  2 15:16:45 darkstar kernel: radeonfb: Found Intel x86 BIOS ROM Image
> Mar  2 15:16:45 darkstar kernel: radeonfb: Retreived PLL infos from BIOS
> Mar  2 15:16:45 darkstar kernel: i2c-algo-bit.o: dvi passed test.
> Mar  2 15:16:45 darkstar kernel: i2c-algo-bit.o: vga passed test.
> Mar  2 15:16:46 darkstar kernel: radeonfb: Monitor 1 type CRT found
> Mar  2 15:16:46 darkstar kernel: radeonfb: EDID probed
> Mar  2 15:16:46 darkstar kernel: radeonfb: Monitor 2 type no found
> 
> BTW, I don't know if it could be related, but my motherboard 
> only supports AGP 4x

There should be more than these... Does it continue booting afte the
screen goes blank or not at all ? Can you send the full dmesg log too ?
Also, enable radeonfb verbose debug in the config.

> > Also, does it work if radeonfb is built-in ?
> 
> I'll try later. Time to sleep.

Ok, thanks.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/