[PATCH] I2C: add GL520SM Sensor Chip driver
From: Greg KH
Date: Fri Mar 04 2005 - 17:11:52 EST
ChangeSet 1.2101, 2005/03/02 12:17:46-08:00, maartendeprez@xxxxxxxxxx
[PATCH] I2C: add GL520SM Sensor Chip driver
Port of the Genesys Logic 520SM sensor chip driver from linux 2.4
Signed-off-by: Maarten Deprez <maartendeprez@xxxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
drivers/i2c/chips/Kconfig | 11
drivers/i2c/chips/Makefile | 1
drivers/i2c/chips/gl520sm.c | 754 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 766 insertions(+)
diff -Nru a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
--- a/drivers/i2c/chips/Kconfig 2005-03-04 12:24:23 -08:00
+++ b/drivers/i2c/chips/Kconfig 2005-03-04 12:24:23 -08:00
@@ -106,6 +106,17 @@
This driver can also be built as a module. If so, the module
will be called gl518sm.
+config SENSORS_GL520SM
+ tristate "Genesys Logic GL520SM"
+ depends on I2C && EXPERIMENTAL
+ select I2C_SENSOR
+ help
+ If you say yes here you get support for Genesys Logic GL520SM
+ sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called gl520sm.
+
config SENSORS_IT87
tristate "ITE IT87xx and compatibles"
depends on I2C && EXPERIMENTAL
diff -Nru a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
--- a/drivers/i2c/chips/Makefile 2005-03-04 12:24:23 -08:00
+++ b/drivers/i2c/chips/Makefile 2005-03-04 12:24:23 -08:00
@@ -16,6 +16,7 @@
obj-$(CONFIG_SENSORS_FSCHER) += fscher.o
obj-$(CONFIG_SENSORS_FSCPOS) += fscpos.o
obj-$(CONFIG_SENSORS_GL518SM) += gl518sm.o
+obj-$(CONFIG_SENSORS_GL520SM) += gl520sm.o
obj-$(CONFIG_SENSORS_IT87) += it87.o
obj-$(CONFIG_SENSORS_LM63) += lm63.o
obj-$(CONFIG_SENSORS_LM75) += lm75.o
diff -Nru a/drivers/i2c/chips/gl520sm.c b/drivers/i2c/chips/gl520sm.c
--- /dev/null Wed Dec 31 16:00:00 196900
+++ b/drivers/i2c/chips/gl520sm.c 2005-03-04 12:24:23 -08:00
@@ -0,0 +1,754 @@
+/*
+ gl520sm.c - Part of lm_sensors, Linux kernel modules for hardware
+ monitoring
+ Copyright (c) 1998, 1999 Frodo Looijaard <frodol@xxxxxx>,
+ Kyösti Mälkki <kmalkki@xxxxxxxxx>
+ Copyright (c) 2005 Maarten Deprez <maartendeprez@xxxxxxxxxxxxxxxxxxxxx>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/i2c-vid.h>
+
+/* Type of the extra sensor */
+static unsigned short extra_sensor_type;
+module_param(extra_sensor_type, ushort, 0);
+MODULE_PARM_DESC(extra_sensor_type, "Type of extra sensor (0=autodetect, 1=temperature, 2=voltage)");
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_1(gl520sm);
+
+/* Many GL520 constants specified below
+One of the inputs can be configured as either temp or voltage.
+That's why _TEMP2 and _IN4 access the same register
+*/
+
+/* The GL520 registers */
+#define GL520_REG_CHIP_ID 0x00
+#define GL520_REG_REVISION 0x01
+#define GL520_REG_CONF 0x03
+#define GL520_REG_MASK 0x11
+
+#define GL520_REG_VID_INPUT 0x02
+
+#define GL520_REG_IN0_INPUT 0x15
+#define GL520_REG_IN0_LIMIT 0x0c
+#define GL520_REG_IN0_MIN GL520_REG_IN0_LIMIT
+#define GL520_REG_IN0_MAX GL520_REG_IN0_LIMIT
+
+#define GL520_REG_IN1_INPUT 0x14
+#define GL520_REG_IN1_LIMIT 0x09
+#define GL520_REG_IN1_MIN GL520_REG_IN1_LIMIT
+#define GL520_REG_IN1_MAX GL520_REG_IN1_LIMIT
+
+#define GL520_REG_IN2_INPUT 0x13
+#define GL520_REG_IN2_LIMIT 0x0a
+#define GL520_REG_IN2_MIN GL520_REG_IN2_LIMIT
+#define GL520_REG_IN2_MAX GL520_REG_IN2_LIMIT
+
+#define GL520_REG_IN3_INPUT 0x0d
+#define GL520_REG_IN3_LIMIT 0x0b
+#define GL520_REG_IN3_MIN GL520_REG_IN3_LIMIT
+#define GL520_REG_IN3_MAX GL520_REG_IN3_LIMIT
+
+#define GL520_REG_IN4_INPUT 0x0e
+#define GL520_REG_IN4_MAX 0x17
+#define GL520_REG_IN4_MIN 0x18
+
+#define GL520_REG_TEMP1_INPUT 0x04
+#define GL520_REG_TEMP1_MAX 0x05
+#define GL520_REG_TEMP1_MAX_HYST 0x06
+
+#define GL520_REG_TEMP2_INPUT 0x0e
+#define GL520_REG_TEMP2_MAX 0x17
+#define GL520_REG_TEMP2_MAX_HYST 0x18
+
+#define GL520_REG_FAN_INPUT 0x07
+#define GL520_REG_FAN_MIN 0x08
+#define GL520_REG_FAN_DIV 0x0f
+#define GL520_REG_FAN_OFF GL520_REG_FAN_DIV
+
+#define GL520_REG_ALARMS 0x12
+#define GL520_REG_BEEP_MASK 0x10
+#define GL520_REG_BEEP_ENABLE GL520_REG_CONF
+
+/*
+ * Function declarations
+ */
+
+static int gl520_attach_adapter(struct i2c_adapter *adapter);
+static int gl520_detect(struct i2c_adapter *adapter, int address, int kind);
+static void gl520_init_client(struct i2c_client *client);
+static int gl520_detach_client(struct i2c_client *client);
+static int gl520_read_value(struct i2c_client *client, u8 reg);
+static int gl520_write_value(struct i2c_client *client, u8 reg, u16 value);
+static struct gl520_data *gl520_update_device(struct device *dev);
+
+/* Driver data */
+static struct i2c_driver gl520_driver = {
+ .owner = THIS_MODULE,
+ .name = "gl520sm",
+ .id = I2C_DRIVERID_GL520,
+ .flags = I2C_DF_NOTIFY,
+ .attach_adapter = gl520_attach_adapter,
+ .detach_client = gl520_detach_client,
+};
+
+/* Client data */
+struct gl520_data {
+ struct i2c_client client;
+ struct semaphore update_lock;
+ char valid; /* zero until the following fields are valid */
+ unsigned long last_updated; /* in jiffies */
+
+ u8 vid;
+ u8 vrm;
+ u8 in_input[5]; /* [0] = VVD */
+ u8 in_min[5]; /* [0] = VDD */
+ u8 in_max[5]; /* [0] = VDD */
+ u8 fan_input[2];
+ u8 fan_min[2];
+ u8 fan_div[2];
+ u8 fan_off;
+ u8 temp_input[2];
+ u8 temp_max[2];
+ u8 temp_max_hyst[2];
+ u8 alarms;
+ u8 beep_enable;
+ u8 beep_mask;
+ u8 alarm_mask;
+ u8 two_temps;
+};
+
+/*
+ * Sysfs stuff
+ */
+
+#define sysfs_r(type, n, item, reg) \
+static ssize_t get_##type##item (struct gl520_data *, char *, int); \
+static ssize_t get_##type##n##item (struct device *, char *); \
+static ssize_t get_##type##n##item (struct device *dev, char *buf) \
+{ \
+ struct gl520_data *data = gl520_update_device(dev); \
+ return get_##type##item(data, buf, (n)); \
+}
+
+#define sysfs_w(type, n, item, reg) \
+static ssize_t set_##type##item (struct i2c_client *, struct gl520_data *, const char *, size_t, int, int); \
+static ssize_t set_##type##n##item (struct device *, const char *, size_t); \
+static ssize_t set_##type##n##item (struct device *dev, const char *buf, size_t count) \
+{ \
+ struct i2c_client *client = to_i2c_client(dev); \
+ struct gl520_data *data = i2c_get_clientdata(client); \
+ return set_##type##item(client, data, buf, count, (n), reg); \
+}
+
+#define sysfs_rw_n(type, n, item, reg) \
+sysfs_r(type, n, item, reg) \
+sysfs_w(type, n, item, reg) \
+static DEVICE_ATTR(type##n##item, S_IRUGO | S_IWUSR, get_##type##n##item, set_##type##n##item);
+
+#define sysfs_ro_n(type, n, item, reg) \
+sysfs_r(type, n, item, reg) \
+static DEVICE_ATTR(type##n##item, S_IRUGO, get_##type##n##item, NULL);
+
+#define sysfs_rw(type, item, reg) \
+sysfs_r(type, 0, item, reg) \
+sysfs_w(type, 0, item, reg) \
+static DEVICE_ATTR(type##item, S_IRUGO | S_IWUSR, get_##type##0##item, set_##type##0##item);
+
+#define sysfs_ro(type, item, reg) \
+sysfs_r(type, 0, item, reg) \
+static DEVICE_ATTR(type##item, S_IRUGO, get_##type##0##item, NULL);
+
+
+#define sysfs_vid(n) \
+sysfs_ro_n(cpu, n, _vid, GL520_REG_VID_INPUT)
+
+#define device_create_file_vid(client, n) \
+device_create_file(&client->dev, &dev_attr_cpu##n##_vid)
+
+#define sysfs_in(n) \
+sysfs_ro_n(in, n, _input, GL520_REG_IN##n##INPUT) \
+sysfs_rw_n(in, n, _min, GL520_REG_IN##n##_MIN) \
+sysfs_rw_n(in, n, _max, GL520_REG_IN##n##_MAX) \
+
+#define device_create_file_in(client, n) \
+({device_create_file(&client->dev, &dev_attr_in##n##_input); \
+device_create_file(&client->dev, &dev_attr_in##n##_min); \
+device_create_file(&client->dev, &dev_attr_in##n##_max);})
+
+#define sysfs_fan(n) \
+sysfs_ro_n(fan, n, _input, GL520_REG_FAN_INPUT) \
+sysfs_rw_n(fan, n, _min, GL520_REG_FAN_MIN) \
+sysfs_rw_n(fan, n, _div, GL520_REG_FAN_DIV)
+
+#define device_create_file_fan(client, n) \
+({device_create_file(&client->dev, &dev_attr_fan##n##_input); \
+device_create_file(&client->dev, &dev_attr_fan##n##_min); \
+device_create_file(&client->dev, &dev_attr_fan##n##_div);})
+
+#define sysfs_fan_off(n) \
+sysfs_rw_n(fan, n, _off, GL520_REG_FAN_OFF) \
+
+#define device_create_file_fan_off(client, n) \
+device_create_file(&client->dev, &dev_attr_fan##n##_off)
+
+#define sysfs_temp(n) \
+sysfs_ro_n(temp, n, _input, GL520_REG_TEMP##n##_INPUT) \
+sysfs_rw_n(temp, n, _max, GL520_REG_TEMP##n##_MAX) \
+sysfs_rw_n(temp, n, _max_hyst, GL520_REG_TEMP##n##_MAX_HYST)
+
+#define device_create_file_temp(client, n) \
+({device_create_file(&client->dev, &dev_attr_temp##n##_input); \
+device_create_file(&client->dev, &dev_attr_temp##n##_max); \
+device_create_file(&client->dev, &dev_attr_temp##n##_max_hyst);})
+
+#define sysfs_alarms() \
+sysfs_ro(alarms, , GL520_REG_ALARMS) \
+sysfs_rw(beep_enable, , GL520_REG_BEEP_ENABLE) \
+sysfs_rw(beep_mask, , GL520_REG_BEEP_MASK)
+
+#define device_create_file_alarms(client) \
+({device_create_file(&client->dev, &dev_attr_alarms); \
+device_create_file(&client->dev, &dev_attr_beep_enable); \
+device_create_file(&client->dev, &dev_attr_beep_mask);})
+
+
+sysfs_vid(0)
+
+sysfs_in(0)
+sysfs_in(1)
+sysfs_in(2)
+sysfs_in(3)
+sysfs_in(4)
+
+sysfs_fan(1)
+sysfs_fan(2)
+sysfs_fan_off(1)
+
+sysfs_temp(1)
+sysfs_temp(2)
+
+sysfs_alarms()
+
+
+static ssize_t get_cpu_vid(struct gl520_data *data, char *buf, int n)
+{
+ return sprintf(buf, "%u\n", vid_from_reg(data->vid, data->vrm));
+}
+
+#define VDD_FROM_REG(val) (((val)*95+2)/4)
+#define VDD_TO_REG(val) (SENSORS_LIMIT((((val)*4+47)/95),0,255))
+
+#define IN_FROM_REG(val) ((val)*19)
+#define IN_TO_REG(val) (SENSORS_LIMIT((((val)+9)/19),0,255))
+
+static ssize_t get_in_input(struct gl520_data *data, char *buf, int n)
+{
+ u8 r = data->in_input[n];
+
+ if (n == 0)
+ return sprintf(buf, "%d\n", VDD_FROM_REG(r));
+ else
+ return sprintf(buf, "%d\n", IN_FROM_REG(r));
+}
+
+static ssize_t get_in_min(struct gl520_data *data, char *buf, int n)
+{
+ u8 r = data->in_min[n];
+
+ if (n == 0)
+ return sprintf(buf, "%d\n", VDD_FROM_REG(r));
+ else
+ return sprintf(buf, "%d\n", IN_FROM_REG(r));
+}
+
+static ssize_t get_in_max(struct gl520_data *data, char *buf, int n)
+{
+ u8 r = data->in_max[n];
+
+ if (n == 0)
+ return sprintf(buf, "%d\n", VDD_FROM_REG(r));
+ else
+ return sprintf(buf, "%d\n", IN_FROM_REG(r));
+}
+
+static ssize_t set_in_min(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg)
+{
+ long v = simple_strtol(buf, NULL, 10);
+ u8 r;
+
+ if (n == 0)
+ r = VDD_TO_REG(v);
+ else
+ r = IN_TO_REG(v);
+
+ data->in_min[n] = r;
+
+ if (n < 4)
+ gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0xff) | r);
+ else
+ gl520_write_value(client, reg, r);
+
+ return count;
+}
+
+static ssize_t set_in_max(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg)
+{
+ long v = simple_strtol(buf, NULL, 10);
+ u8 r;
+
+ if (n == 0)
+ r = VDD_TO_REG(v);
+ else
+ r = IN_TO_REG(v);
+
+ data->in_max[n] = r;
+
+ if (n < 4)
+ gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0xff00) | (r << 8));
+ else
+ gl520_write_value(client, reg, r);
+
+ return count;
+}
+
+#define DIV_FROM_REG(val) (1 << (val))
+#define FAN_FROM_REG(val,div) ((val)==0 ? 0 : (480000/((val) << (div))))
+#define FAN_TO_REG(val,div) ((val)<=0?0:SENSORS_LIMIT((480000 + ((val) << ((div)-1))) / ((val) << (div)), 1, 255));
+
+static ssize_t get_fan_input(struct gl520_data *data, char *buf, int n)
+{
+ return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_input[n - 1], data->fan_div[n - 1]));
+}
+
+static ssize_t get_fan_min(struct gl520_data *data, char *buf, int n)
+{
+ return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[n - 1], data->fan_div[n - 1]));
+}
+
+static ssize_t get_fan_div(struct gl520_data *data, char *buf, int n)
+{
+ return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[n - 1]));
+}
+
+static ssize_t get_fan_off(struct gl520_data *data, char *buf, int n)
+{
+ return sprintf(buf, "%d\n", data->fan_off);
+}
+
+static ssize_t set_fan_min(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg)
+{
+ unsigned long v = simple_strtoul(buf, NULL, 10);
+ u8 r = FAN_TO_REG(v, data->fan_div[n - 1]);
+
+ data->fan_min[n - 1] = r;
+
+ if (n == 1)
+ gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0xff00) | (r << 8));
+ else
+ gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0xff) | r);
+
+ data->beep_mask = gl520_read_value(client, GL520_REG_BEEP_MASK);
+ if (data->fan_min[n - 1] == 0)
+ data->alarm_mask &= (n == 1) ? ~0x20 : ~0x40;
+ else
+ data->alarm_mask |= (n == 1) ? 0x20 : 0x40;
+ data->beep_mask &= data->alarm_mask;
+ gl520_write_value(client, GL520_REG_BEEP_MASK, data->beep_mask);
+
+ return count;
+}
+
+static ssize_t set_fan_div(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg)
+{
+ unsigned long v = simple_strtoul(buf, NULL, 10);
+ u8 r;
+
+ switch (v) {
+ case 1: r = 0; break;
+ case 2: r = 1; break;
+ case 4: r = 2; break;
+ case 8: r = 3; break;
+ default:
+ dev_err(&client->dev, "fan_div value %ld not supported. Choose one of 1, 2, 4 or 8!\n", v);
+ return -EINVAL;
+ }
+
+ data->fan_div[n - 1] = r;
+
+ if (n == 1)
+ gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0xc0) | (r << 6));
+ else
+ gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0x30) | (r << 4));
+
+ return count;
+}
+
+static ssize_t set_fan_off(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg)
+{
+ u8 r = simple_strtoul(buf, NULL, 10)?1:0;
+
+ data->fan_off = r;
+ gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0x0c) | (r << 2));
+
+ return count;
+}
+
+#define TEMP_FROM_REG(val) (((val) - 130) * 1000)
+#define TEMP_TO_REG(val) (SENSORS_LIMIT(((((val)<0?(val)-500:(val)+500) / 1000)+130),0,255))
+
+static ssize_t get_temp_input(struct gl520_data *data, char *buf, int n)
+{
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_input[n - 1]));
+}
+
+static ssize_t get_temp_max(struct gl520_data *data, char *buf, int n)
+{
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[n - 1]));
+}
+
+static ssize_t get_temp_max_hyst(struct gl520_data *data, char *buf, int n)
+{
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max_hyst[n - 1]));
+}
+
+static ssize_t set_temp_max(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg)
+{
+ long v = simple_strtol(buf, NULL, 10);
+ u8 r = TEMP_TO_REG(v);
+
+ data->temp_max[n - 1] = r;
+ gl520_write_value(client, reg, r);
+
+ return count;
+}
+
+static ssize_t set_temp_max_hyst(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg)
+{
+ long v = simple_strtol(buf, NULL, 10);
+ u8 r = TEMP_TO_REG(v);
+
+ data->temp_max_hyst[n - 1] = r;
+ gl520_write_value(client, reg, r);
+
+ return count;
+}
+
+static ssize_t get_alarms(struct gl520_data *data, char *buf, int n)
+{
+ return sprintf(buf, "%d\n", data->alarms);
+}
+
+static ssize_t get_beep_enable(struct gl520_data *data, char *buf, int n)
+{
+ return sprintf(buf, "%d\n", data->beep_enable);
+}
+
+static ssize_t get_beep_mask(struct gl520_data *data, char *buf, int n)
+{
+ return sprintf(buf, "%d\n", data->beep_mask);
+}
+
+static ssize_t set_beep_enable(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg)
+{
+ u8 r = simple_strtoul(buf, NULL, 10)?0:1;
+
+ data->beep_enable = !r;
+ gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0x04) | (r << 2));
+
+ return count;
+}
+
+static ssize_t set_beep_mask(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg)
+{
+ u8 r = simple_strtoul(buf, NULL, 10) & data->alarm_mask;
+
+ data->beep_mask = r;
+ gl520_write_value(client, reg, r);
+
+ return count;
+}
+
+
+/*
+ * Real code
+ */
+
+static int gl520_attach_adapter(struct i2c_adapter *adapter)
+{
+ if (!(adapter->class & I2C_CLASS_HWMON))
+ return 0;
+ return i2c_detect(adapter, &addr_data, gl520_detect);
+}
+
+static int gl520_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+ struct i2c_client *new_client;
+ struct gl520_data *data;
+ int err = 0;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_WORD_DATA))
+ goto exit;
+
+ /* OK. For now, we presume we have a valid client. We now create the
+ client structure, even though we cannot fill it completely yet.
+ But it allows us to access gl520_{read,write}_value. */
+
+ if (!(data = kmalloc(sizeof(struct gl520_data), GFP_KERNEL))) {
+ err = -ENOMEM;
+ goto exit;
+ }
+ memset(data, 0, sizeof(struct gl520_data));
+
+ new_client = &data->client;
+ i2c_set_clientdata(new_client, data);
+ new_client->addr = address;
+ new_client->adapter = adapter;
+ new_client->driver = &gl520_driver;
+ new_client->flags = 0;
+
+ /* Determine the chip type. */
+ if (kind < 0) {
+ if ((gl520_read_value(new_client, GL520_REG_CHIP_ID) != 0x20) ||
+ ((gl520_read_value(new_client, GL520_REG_REVISION) & 0x7f) != 0x00) ||
+ ((gl520_read_value(new_client, GL520_REG_CONF) & 0x80) != 0x00)) {
+ dev_dbg(&new_client->dev, "Unknown chip type, skipping\n");
+ goto exit_free;
+ }
+ }
+
+ /* Fill in the remaining client fields */
+ strlcpy(new_client->name, "gl520sm", I2C_NAME_SIZE);
+ data->valid = 0;
+ init_MUTEX(&data->update_lock);
+
+ /* Tell the I2C layer a new client has arrived */
+ if ((err = i2c_attach_client(new_client)))
+ goto exit_free;
+
+ /* Initialize the GL520SM chip */
+ gl520_init_client(new_client);
+
+ /* Register sysfs hooks */
+ device_create_file_vid(new_client, 0);
+
+ device_create_file_in(new_client, 0);
+ device_create_file_in(new_client, 1);
+ device_create_file_in(new_client, 2);
+ device_create_file_in(new_client, 3);
+ if (!data->two_temps)
+ device_create_file_in(new_client, 4);
+
+ device_create_file_fan(new_client, 1);
+ device_create_file_fan(new_client, 2);
+ device_create_file_fan_off(new_client, 1);
+
+ device_create_file_temp(new_client, 1);
+ if (data->two_temps)
+ device_create_file_temp(new_client, 2);
+
+ device_create_file_alarms(new_client);
+
+ return 0;
+
+exit_free:
+ kfree(data);
+exit:
+ return err;
+}
+
+
+/* Called when we have found a new GL520SM. */
+static void gl520_init_client(struct i2c_client *client)
+{
+ struct gl520_data *data = i2c_get_clientdata(client);
+ u8 oldconf, conf;
+
+ conf = oldconf = gl520_read_value(client, GL520_REG_CONF);
+
+ data->alarm_mask = 0xff;
+ data->vrm = i2c_which_vrm();
+
+ if (extra_sensor_type == 1)
+ conf &= ~0x10;
+ else if (extra_sensor_type == 2)
+ conf |= 0x10;
+ data->two_temps = !(conf & 0x10);
+
+ /* If IRQ# is disabled, we can safely force comparator mode */
+ if (!(conf & 0x20))
+ conf &= 0xf7;
+
+ /* Enable monitoring if needed */
+ conf |= 0x40;
+
+ if (conf != oldconf)
+ gl520_write_value(client, GL520_REG_CONF, conf);
+
+ gl520_update_device(&(client->dev));
+
+ if (data->fan_min[0] == 0)
+ data->alarm_mask &= ~0x20;
+ if (data->fan_min[1] == 0)
+ data->alarm_mask &= ~0x40;
+
+ data->beep_mask &= data->alarm_mask;
+ gl520_write_value(client, GL520_REG_BEEP_MASK, data->beep_mask);
+}
+
+static int gl520_detach_client(struct i2c_client *client)
+{
+ int err;
+
+ if ((err = i2c_detach_client(client))) {
+ dev_err(&client->dev, "Client deregistration failed, "
+ "client not detached.\n");
+ return err;
+ }
+
+ kfree(i2c_get_clientdata(client));
+ return 0;
+}
+
+
+/* Registers 0x07 to 0x0c are word-sized, others are byte-sized
+ GL520 uses a high-byte first convention */
+static int gl520_read_value(struct i2c_client *client, u8 reg)
+{
+ if ((reg >= 0x07) && (reg <= 0x0c))
+ return swab16(i2c_smbus_read_word_data(client, reg));
+ else
+ return i2c_smbus_read_byte_data(client, reg);
+}
+
+static int gl520_write_value(struct i2c_client *client, u8 reg, u16 value)
+{
+ if ((reg >= 0x07) && (reg <= 0x0c))
+ return i2c_smbus_write_word_data(client, reg, swab16(value));
+ else
+ return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+
+static struct gl520_data *gl520_update_device(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct gl520_data *data = i2c_get_clientdata(client);
+ int val;
+
+ down(&data->update_lock);
+
+ if ((jiffies - data->last_updated > 2 * HZ) ||
+ (jiffies < data->last_updated) || !data->valid) {
+
+ dev_dbg(&client->dev, "Starting gl520sm update\n");
+
+ data->alarms = gl520_read_value(client, GL520_REG_ALARMS);
+ data->beep_mask = gl520_read_value(client, GL520_REG_BEEP_MASK);
+ data->vid = gl520_read_value(client, GL520_REG_VID_INPUT) & 0x1f;
+
+ val = gl520_read_value(client, GL520_REG_IN0_LIMIT);
+ data->in_min[0] = val & 0xff;
+ data->in_max[0] = (val >> 8) & 0xff;
+ val = gl520_read_value(client, GL520_REG_IN1_LIMIT);
+ data->in_min[1] = val & 0xff;
+ data->in_max[1] = (val >> 8) & 0xff;
+ val = gl520_read_value(client, GL520_REG_IN2_LIMIT);
+ data->in_min[2] = val & 0xff;
+ data->in_max[2] = (val >> 8) & 0xff;
+ val = gl520_read_value(client, GL520_REG_IN3_LIMIT);
+ data->in_min[3] = val & 0xff;
+ data->in_max[3] = (val >> 8) & 0xff;
+
+ val = gl520_read_value(client, GL520_REG_FAN_INPUT);
+ data->fan_input[0] = (val >> 8) & 0xff;
+ data->fan_input[1] = val & 0xff;
+
+ val = gl520_read_value(client, GL520_REG_FAN_MIN);
+ data->fan_min[0] = (val >> 8) & 0xff;
+ data->fan_min[1] = val & 0xff;
+
+ data->temp_input[0] = gl520_read_value(client, GL520_REG_TEMP1_INPUT);
+ data->temp_max[0] = gl520_read_value(client, GL520_REG_TEMP1_MAX);
+ data->temp_max_hyst[0] = gl520_read_value(client, GL520_REG_TEMP1_MAX_HYST);
+
+ val = gl520_read_value(client, GL520_REG_FAN_DIV);
+ data->fan_div[0] = (val >> 6) & 0x03;
+ data->fan_div[1] = (val >> 4) & 0x03;
+ data->fan_off = (val >> 2) & 0x01;
+
+ data->alarms &= data->alarm_mask;
+
+ val = gl520_read_value(client, GL520_REG_CONF);
+ data->beep_enable = !((val >> 2) & 1);
+
+ data->in_input[0] = gl520_read_value(client, GL520_REG_IN0_INPUT);
+ data->in_input[1] = gl520_read_value(client, GL520_REG_IN1_INPUT);
+ data->in_input[2] = gl520_read_value(client, GL520_REG_IN2_INPUT);
+ data->in_input[3] = gl520_read_value(client, GL520_REG_IN3_INPUT);
+
+ /* Temp1 and Vin4 are the same input */
+ if (data->two_temps) {
+ data->temp_input[1] = gl520_read_value(client, GL520_REG_TEMP2_INPUT);
+ data->temp_max[1] = gl520_read_value(client, GL520_REG_TEMP2_MAX);
+ data->temp_max_hyst[1] = gl520_read_value(client, GL520_REG_TEMP2_MAX_HYST);
+ } else {
+ data->in_input[4] = gl520_read_value(client, GL520_REG_IN4_INPUT);
+ data->in_min[4] = gl520_read_value(client, GL520_REG_IN4_MIN);
+ data->in_max[4] = gl520_read_value(client, GL520_REG_IN4_MAX);
+ }
+
+ data->last_updated = jiffies;
+ data->valid = 1;
+ }
+
+ up(&data->update_lock);
+
+ return data;
+}
+
+
+static int __init sensors_gl520sm_init(void)
+{
+ return i2c_add_driver(&gl520_driver);
+}
+
+static void __exit sensors_gl520sm_exit(void)
+{
+ i2c_del_driver(&gl520_driver);
+}
+
+
+MODULE_AUTHOR("Frodo Looijaard <frodol@xxxxxx>, "
+ "Kyösti Mälkki <kmalkki@xxxxxxxxx>, "
+ "Maarten Deprez <maartendeprez@xxxxxxxxxxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("GL520SM driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_gl520sm_init);
+module_exit(sensors_gl520sm_exit);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/