[BK PATCHES] 2.6.x libata updates
From: Jeff Garzik
Date: Sat Mar 05 2005 - 14:22:05 EST
Please do a
bk pull bk://gkernel.bkbits.net/libata-2.6
This will update the following files:
drivers/scsi/ahci.c | 12 +++++------
drivers/scsi/sata_qstor.c | 50 +++++++++++++++++++++++++++++++---------------
drivers/scsi/sata_vsc.c | 4 +--
3 files changed, 42 insertions(+), 24 deletions(-)
through these ChangeSets:
<liml:rtr.ca>:
o sata_qstor: eh_timeout fix
<tklauser:nuerscht.ch>:
o drivers/scsi/ahci: Use the DMA_{64,32}BIT_MASK constants
o drivers/scsi/sata_vsc: Use the DMA_{64,32}BIT_MASK constants
Jeff Garzik:
o [libata ahci] Print out port id on error messages
Mark Lord:
o [libata qstor] minor update per LKML comments
diff -Nru a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
--- a/drivers/scsi/ahci.c 2005-03-05 13:45:12 -05:00
+++ b/drivers/scsi/ahci.c 2005-03-05 13:45:12 -05:00
@@ -574,7 +574,7 @@
writel(tmp, port_mmio + PORT_CMD);
readl(port_mmio + PORT_CMD); /* flush */
- printk(KERN_WARNING "ata%u: error occurred, port reset\n", ap->port_no);
+ printk(KERN_WARNING "ata%u: error occurred, port reset\n", ap->id);
}
static void ahci_eng_timeout(struct ata_port *ap)
@@ -766,10 +766,10 @@
using_dac = hpriv->cap & HOST_CAP_64;
if (using_dac &&
- !pci_set_dma_mask(pdev, 0xffffffffffffffffULL)) {
- rc = pci_set_consistent_dma_mask(pdev, 0xffffffffffffffffULL);
+ !pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
+ rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
if (rc) {
- rc = pci_set_consistent_dma_mask(pdev, 0xffffffffULL);
+ rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
printk(KERN_ERR DRV_NAME "(%s): 64-bit DMA enable failed\n",
pci_name(pdev));
@@ -779,13 +779,13 @@
hpriv->flags |= HOST_CAP_64;
} else {
- rc = pci_set_dma_mask(pdev, 0xffffffffULL);
+ rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
printk(KERN_ERR DRV_NAME "(%s): 32-bit DMA enable failed\n",
pci_name(pdev));
return rc;
}
- rc = pci_set_consistent_dma_mask(pdev, 0xffffffffULL);
+ rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
printk(KERN_ERR DRV_NAME "(%s): 32-bit consistent DMA enable failed\n",
pci_name(pdev));
diff -Nru a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c
--- a/drivers/scsi/sata_qstor.c 2005-03-05 13:45:12 -05:00
+++ b/drivers/scsi/sata_qstor.c 2005-03-05 13:45:12 -05:00
@@ -38,7 +38,7 @@
#include <linux/libata.h>
#define DRV_NAME "sata_qstor"
-#define DRV_VERSION "0.03"
+#define DRV_VERSION "0.04"
enum {
QS_PORTS = 4,
@@ -120,6 +120,7 @@
static void qs_bmdma_stop(struct ata_port *ap);
static u8 qs_bmdma_status(struct ata_port *ap);
static void qs_irq_clear(struct ata_port *ap);
+static void qs_eng_timeout(struct ata_port *ap);
static Scsi_Host_Template qs_ata_sht = {
.module = THIS_MODULE,
@@ -152,7 +153,7 @@
.phy_reset = qs_phy_reset,
.qc_prep = qs_qc_prep,
.qc_issue = qs_qc_issue,
- .eng_timeout = ata_eng_timeout,
+ .eng_timeout = qs_eng_timeout,
.irq_handler = qs_intr,
.irq_clear = qs_irq_clear,
.scr_read = qs_scr_read,
@@ -212,7 +213,7 @@
/* nothing */
}
-static void qs_enter_reg_mode(struct ata_port *ap)
+static inline void qs_enter_reg_mode(struct ata_port *ap)
{
u8 __iomem *chan = ap->host_set->mmio_base + (ap->port_no * 0x4000);
@@ -220,17 +221,34 @@
readb(chan + QS_CCT_CTR0); /* flush */
}
-static void qs_phy_reset(struct ata_port *ap)
+static inline void qs_reset_channel_logic(struct ata_port *ap)
{
u8 __iomem *chan = ap->host_set->mmio_base + (ap->port_no * 0x4000);
- struct qs_port_priv *pp = ap->private_data;
- pp->state = qs_state_idle;
writeb(QS_CTR1_RCHN, chan + QS_CCT_CTR1);
+ readb(chan + QS_CCT_CTR0); /* flush */
qs_enter_reg_mode(ap);
+}
+
+static void qs_phy_reset(struct ata_port *ap)
+{
+ struct qs_port_priv *pp = ap->private_data;
+
+ pp->state = qs_state_idle;
+ qs_reset_channel_logic(ap);
sata_phy_reset(ap);
}
+static void qs_eng_timeout(struct ata_port *ap)
+{
+ struct qs_port_priv *pp = ap->private_data;
+
+ if (pp->state != qs_state_idle) /* healthy paranoia */
+ pp->state = qs_state_mmio;
+ qs_reset_channel_logic(ap);
+ ata_eng_timeout(ap);
+}
+
static u32 qs_scr_read (struct ata_port *ap, unsigned int sc_reg)
{
if (sc_reg > SCR_CONTROL)
@@ -261,11 +279,11 @@
u32 len;
addr = sg_dma_address(sg);
- *(u64 *)prd = cpu_to_le64(addr);
+ *(__le64 *)prd = cpu_to_le64(addr);
prd += sizeof(u64);
len = sg_dma_len(sg);
- *(u32 *)prd = cpu_to_le32(len);
+ *(__le32 *)prd = cpu_to_le32(len);
prd += sizeof(u64);
VPRINTK("PRD[%u] = (0x%llX, 0x%X)\n", nelem,
@@ -298,10 +316,10 @@
/* host control block (HCB) */
buf[ 0] = QS_HCB_HDR;
buf[ 1] = hflags;
- *(u32 *)(&buf[ 4]) = cpu_to_le32(qc->nsect * ATA_SECT_SIZE);
- *(u32 *)(&buf[ 8]) = cpu_to_le32(qc->n_elem);
+ *(__le32 *)(&buf[ 4]) = cpu_to_le32(qc->nsect * ATA_SECT_SIZE);
+ *(__le32 *)(&buf[ 8]) = cpu_to_le32(qc->n_elem);
addr = ((u64)pp->pkt_dma) + QS_CPB_BYTES;
- *(u64 *)(&buf[16]) = cpu_to_le64(addr);
+ *(__le64 *)(&buf[16]) = cpu_to_le64(addr);
/* device control block (DCB) */
buf[24] = QS_DCB_HDR;
@@ -566,10 +584,10 @@
int rc, have_64bit_bus = (bus_info & QS_HPHY_64BIT);
if (have_64bit_bus &&
- !pci_set_dma_mask(pdev, 0xffffffffffffffffULL)) {
- rc = pci_set_consistent_dma_mask(pdev, 0xffffffffffffffffULL);
+ !pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
+ rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
if (rc) {
- rc = pci_set_consistent_dma_mask(pdev, 0xffffffffULL);
+ rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
printk(KERN_ERR DRV_NAME
"(%s): 64-bit DMA enable failed\n",
@@ -578,14 +596,14 @@
}
}
} else {
- rc = pci_set_dma_mask(pdev, 0xffffffffULL);
+ rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
printk(KERN_ERR DRV_NAME
"(%s): 32-bit DMA enable failed\n",
pci_name(pdev));
return rc;
}
- rc = pci_set_consistent_dma_mask(pdev, 0xffffffffULL);
+ rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
printk(KERN_ERR DRV_NAME
"(%s): 32-bit consistent DMA enable failed\n",
diff -Nru a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c
--- a/drivers/scsi/sata_vsc.c 2005-03-05 13:45:12 -05:00
+++ b/drivers/scsi/sata_vsc.c 2005-03-05 13:45:12 -05:00
@@ -285,10 +285,10 @@
/*
* Use 32 bit DMA mask, because 64 bit address support is poor.
*/
- rc = pci_set_dma_mask(pdev, 0xFFFFFFFFULL);
+ rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (rc)
goto err_out_regions;
- rc = pci_set_consistent_dma_mask(pdev, 0xFFFFFFFFULL);
+ rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
if (rc)
goto err_out_regions;