[BK PATCHES] ide-dev-2.6 update
From: Bartlomiej Zolnierkiewicz
Date: Tue Mar 08 2005 - 09:14:36 EST
Hi,
ChangeLog:
* sync with linux-2.6 tree
* ide_init_disk() fix (Andrew Morton)
* ide_dma_intr() OOPS fix (Tejun Heo)
* sanitize usage of LBA bit in Device register
* remove REQ_DRIVE_TASK (Tejun Heo)
* some cleanups (Tejun Heo and me)
* convert device drivers to driver model
Bartlomiej
BK users:
bk pull bk://bart.bkbits.net/ide-dev-2.6
This will update the following files:
drivers/ide/ide-default.c | 73 -----
drivers/block/ll_rw_blk.c | 1
drivers/ide/Kconfig | 8
drivers/ide/Makefile | 3
drivers/ide/ide-cd.c | 259 ++++++++++--------
drivers/ide/ide-cd.h | 4
drivers/ide/ide-disk.c | 584 +++++++++++++++--------------------------
drivers/ide/ide-dma.c | 8
drivers/ide/ide-floppy.c | 208 ++++++++++----
drivers/ide/ide-io.c | 399 +++++++++++++++++++---------
drivers/ide/ide-iops.c | 32 +-
drivers/ide/ide-lib.c | 5
drivers/ide/ide-probe.c | 231 +++++++++++-----
drivers/ide/ide-proc.c | 68 +++-
drivers/ide/ide-tape.c | 270 ++++++++++++------
drivers/ide/ide-taskfile.c | 225 +++++++++------
drivers/ide/ide.c | 451 +++----------------------------
drivers/ide/pci/pdc202xx_new.c | 6
drivers/ide/pci/pdc202xx_old.c | 17 -
drivers/ide/pci/via82cxxx.c | 37 +-
drivers/ide/setup-pci.c | 15 -
drivers/scsi/ide-scsi.c | 161 ++++++++---
include/linux/ata.h | 12
include/linux/blkdev.h | 2
include/linux/hdreg.h | 4
include/linux/ide.h | 84 ++---
include/linux/pci_ids.h | 1
27 files changed, 1622 insertions(+), 1546 deletions(-)
through these ChangeSets:
<bzolnier@trik.(none)> (05/03/08 1.2033)
[ide] fix driver->probe return codes
<bzolnier@trik.(none)> (05/03/08 1.2032)
[ide] convert device drivers to driver-model
* add ide_bus_match() and export ide_bus_type
* split ide_remove_driver_from_hwgroup() out of ide_unregister()
* move device cleanup from ide_unregister() to drive_release_dev()
* convert ide_driver_t->name to driver->name
* convert ide_driver_t->{attach,cleanup} to driver->{probe,remove}
* remove ide_driver_t->busy as ide_bus_type->subsys.rwsem
protects against concurrent ->{probe,remove} calls
* make ide_{un}register_driver() void as it cannot fail now
* use driver_{un}register() directly, remove ide_{un}register_driver()
* use device_register() instead of ata_attach(), remove ata_attach()
* add proc_print_driver() and ide_drivers_show(), remove ide_drivers_op
* fix ide_replace_subdriver() and move it to ide-proc.c
* remove ide_driver_t->drives, ide_drives and drives_lock
* remove ide_driver_t->drivers, drivers and drivers_lock
* remove ide_drive_t->driver and DRIVER() macro
<htejun@xxxxxxxxx> (05/03/08 1.2031)
[ide] remove unused REQ_DRIVE_TASK handling
Signed-off-by: Tejun Heo <htejun@xxxxxxxxx>
<htejun@xxxxxxxxx> (05/03/08 1.2030)
[ide] make ide_task_ioctl() use REQ_DRIVE_TASKFILE
ide_task_ioctl() rewritten to use taskfile transport.
This is the last user of REQ_DRIVE_TASK.
bart: ported to recent IDE changes by me
Signed-off-by: Tejun Heo <htejun@xxxxxxxxx>
<bzolnier@trik.(none)> (05/03/08 1.2029)
[ide] convert disk flush functions to use REQ_DRIVE_TASKFILE
Original patch from Tejun Heo <htejun@xxxxxxxxx>,
ported over recent IDE changes by me.
* teach ide_tf_get_address() about CHS
* use ide_tf_get_address() and remove ide_get_error_location()
* use ide_task_init_flush() and remove ide_fill_flush_cmd()
* convert idedisk_issue_flush() to use REQ_DRIVE_TASKFILE.
This and switching to ide_tf_get_address() removes
a possible race condition between getting the failed
sector number and other requests.
* convert ide_queue_flush_cmd() to use REQ_DRIVE_TASKFILE
By this change, when WIN_FLUSH_CACHE_EXT is used, full HOB
registers are written and read. This isn't optimal but
shouldn't be noticeable either.
<bzolnier@trik.(none)> (05/03/08 1.2028)
[ide] check capacity in ide_task_init_flush()
Use WIN_FLUSH_CACHE_EXT only if disk requires LBA48.
<bzolnier@trik.(none)> (05/03/08 1.2027)
[ide] fix setting LBA bit in Device register for REQ_DRIVE_TASKFILE
* Power Management requests
(WIN_STANDBYNOW1, WIN_IDLEIMMEDIATE commands)
* special commands (WIN_SPECIFY, WIN_RESTORE, WIN_SETMULT)
* /proc/ide/ SMART support (WIN_SMART with SMART_ENABLE,
SMART_READ_VALUES and SMART_READ_THRESHOLDS subcommands)
* write cache enabling/disabling in ide-disk
(WIN_SETFEATURES with SETFEATURES_{EN,DIS}_WCACHE)
* acoustic management in ide-disk
(WIN_SETFEATURES with SETFEATURES_{EN,DIS}_AAM)
* door (un)locking in ide-disk (WIN_DOORLOCK, WIN_DOORUNLOCK)
* /proc/ide/hd?/identify support (WIN_IDENTIFY)
<bzolnier@trik.(none)> (05/03/08 1.2026)
[ide] add ide_task_init_flush() helper
* add ide_task_init_flush() helper
* use it in do_idedisk_cacheflush() and ide_start_power_step()
* inline do_idedisk_cacheflush() into ide_cacheflush_p()
<bzolnier@trik.(none)> (05/03/08 1.2025)
[ide] merge LBA28 and LBA48 Host Protected Area support code
* merge idedisk_read_native_max_address()
and idedisk_read_native_max_address_ext()
* merge idedisk_set_max_address()
and idedisk_set_max_address_ext()
<bzolnier@trik.(none)> (05/03/08 1.2024)
[ide] add ide_tf_get_address() helper
* add ide_tf_get_address() helper
* use it in idedisk_read_native_max_address[_ext]()
and idedisk_set_max_address[_ext]()
<bzolnier@trik.(none)> (05/03/08 1.2023)
[ide] use struct ata_taskfile in ide_task_t
* use struct ata_taskfile instead of .flags,
.tfRegister[] and .hobRegister[] in ide_task_t
* add #ifndef __KERNEL__ around definitions of {task,hob}_struct_t
* don't set write-only .hobRegister[6] and .hobRegister[7]
in idedisk_set_max_address_ext()
* remove no longer needed IDE_CONTROL_OFFSET_HOB define
* use ATA_LBA define in ide-disk.c (suggested by Tejun Heo)
<htejun@xxxxxxxxx> (05/03/08 1.2022)
[ide] ide_dma_intr() OOPS fix
This patch fixes ide_dma_intr() OOPS which occurs
for HDIO_DRIVE_TASKFILE ioctl using DMA dataphases.
Signed-off-by: Tejun Heo <htejun@xxxxxxxxx>
<akpm@xxxxxxxx> (05/03/08 1.1982.131.2)
[ide] ide_init_disk() fix
Signed-off-by: Andrew Morton <akpm@xxxxxxxx>
<bzolnier@trik.(none)> (05/02/11 1.1982.34.52)
[ide] fix io_32bit race in ide_taskfile_ioctl()
In ide_taskfile_ioctl(), there was a race condition involving
drive->io_32bit. It was cleared and restored during ioctl
requests but there was no synchronization with other requests.
So, other requests could execute with the altered io_32bit
setting or updated drive->io_32bit could be overwritten by
ide_taskfile_ioctl().
This patch adds ATA_TFLAG_IO_16BIT flag to indicate to
ide_pio_datablock() that 16bit IO is needed regardless of
drive->io_32bit settting.
Signed-off-by: Tejun Heo <htejun@xxxxxxxxx>
<bzolnier@trik.(none)> (05/02/11 1.1982.34.51)
[ide] fix unneeded LBA48 taskfile registers access
This small patch fixes unneeded writes/reads to LBA48 taskfile registers
on LBA48 capable disks for following cases:
* Power Management requests
(WIN_FLUSH_CACHE, WIN_STANDBYNOW1, WIN_IDLEIMMEDIATE commands)
* special commands (WIN_SPECIFY, WIN_RESTORE, WIN_SETMULT)
* Host Protected Area support (WIN_READ_NATIVE_MAX, WIN_SET_MAX)
* /proc/ide/ SMART support (WIN_SMART with SMART_ENABLE,
SMART_READ_VALUES and SMART_READ_THRESHOLDS subcommands)
* write cache enabling/disabling in ide-disk
(WIN_SETFEATURES with SETFEATURES_{EN,DIS}_WCACHE)
* write cache flushing in ide-disk (WIN_FLUSH_CACHE)
* acoustic management in ide-disk
(WIN_SETFEATURES with SETFEATURES_{EN,DIS}_AAM)
* door (un)locking in ide-disk (WIN_DOORLOCK, WIN_DOORUNLOCK)
* /proc/ide/hd?/identify support (WIN_IDENTIFY)
Patch adds 'unsinged long flags' to ide_task_t and uses ATA_TFLAG_LBA48
flag (from <linux/ata.h>) to indicate need of access to LBA48 taskfile
registers.
<bzolnier@trik.(none)> (05/02/11 1.1982.34.50)
[ide via82cxxx] add VIA VT6410 support
From: Mathias Kretschmer <posting@xxxxxxxx>
<bzolnier@trik.(none)> (05/02/11 1.1982.34.49)
[ide] fix OOPS in task_end_request()
Requests generated by /proc/ide/hd?/identify
and /proc/ide/hd?/smart_{thresholds,values}
don't have valid rq->rq_disk set.
Use ide_end_request() instead of ->end_request().
<bzolnier@trik.(none)> (05/02/06 1.1982.34.48)
[ide] fix ATAPI Power Management
I've introduced bug in ATAPI Power Management handling,
idedisk_pm_idle shouldn't be done for ATAPI devices.
<bzolnier@trik.(none)> (05/02/06 1.1982.34.47)
[ide] fix pdc202xx_{new,old}.c after linux-2.6 merge
<bzolnier@trik.(none)> (05/02/04 1.1982.33.18)
[ide] kill ide-default
* add ide_drives list to list devices without a driver
* add __ide_add_setting() and use it for adding no auto remove entries
* kill ide-default pseudo-driver
<bzolnier@trik.(none)> (05/02/04 1.1982.33.17)
[ide] get driver from rq->rq_disk->private_data
* add ide_driver_t * to device drivers objects
* set it to point at driver's ide_driver_t
* store address of this entry in disk->private_data
* fix ide_{cd,disk,floppy,tape,scsi}_g accordingly
* use rq->rq_disk->private_data instead of drive->driver
to obtain driver (this allows us to kill ide-default)
<bzolnier@trik.(none)> (05/02/04 1.1982.33.16)
[ide] kill ide_drive_t->disk
* move ->disk from ide_drive_t to driver specific objects
* make drivers allocate struct gendisk and setup rq->rq_disk
(there is no need to do this for REQ_DRIVE_TASKFILE requests)
* add ide_init_disk() helper and kill alloc_disks() in ide-probe.c
* kill no longer needed ide_open() and ide_fops[] in ide.c
<bzolnier@trik.(none)> (05/02/04 1.1982.33.15)
[ide] add ide_{un}register_region()
Add ide_{un}register_region() and fix ide-{tape,scsi}.c to register
block device number ranges. In ata_probe() only probe for modules.
Behavior is unchanged because:
* if driver is already loaded and attached to drive ata_probe()
is not called et all
* if driver is loaded by ata_probe() it will register new number range
for a drive and this range will be found by kobj_lookup()
If this is not clear please read http://lwn.net/Articles/25711/
and see drivers/base/map.c.
This patch makes it possible to move drive->disk allocation from
ide-probe.c to device drivers.
<bzolnier@trik.(none)> (05/02/04 1.1982.33.14)
[ide] destroy_proc_ide_device() cleanup
When this function is called device is already unbinded from a
driver so there are no driver /proc entries to remove.
<bzolnier@trik.(none)> (05/02/04 1.1982.33.13)
[ide] drive->dsc_overlap fix
drive->dsc_overlap is supported only by ide-{cd,tape} drivers.
Add missing clearing of ->dsc_overlap to ide_{cd,tape}_release()
and move ->dsc_overlap setup from ide_register_subdriver() to
ide_cdrom_setup() (ide-tape enables it unconditionally).
<bzolnier@trik.(none)> (05/02/04 1.1982.33.12)
[ide] drive->nice1 fix
It is drive's property independent of the driver being used so move
drive->nice1 setup from ide_register_subdriver() to probe_hwif() in
ide-probe.c. As a result changing a driver which controls the drive
no longer affects this flag.
<bzolnier@trik.(none)> (05/02/04 1.1982.33.11)
[ide] ide-tape: fix character device ->open() vs ->cleanup() race
Similar to the same race but for the block device.
* store pointer to struct ide_tape_obj in idetape_chrdevs[]
* rename idetape_chrdevs[] to idetape_devs[] and kill idetape_chrdev_t
* add ide_tape_chrdev_get() for getting reference to the tape
* store tape pointer in file->private_data and fix all users of it
* fix idetape_chrdev_{open,release}() to get/put reference to the tape
<bzolnier@trik.(none)> (05/02/03 1.1982.33.10)
[ide] fix via82cxxx resume failure
With David Woodhouse <dwmw2@xxxxxxxxxxxxx>.
On resume from sleep, via_set_speed() doesn't reinstate the correct
mode, because it thinks the drive is already configured correctly.
Also kill redundant printk, ide_config_drive_speed() warns about errors.
<bzolnier@trik.(none)> (05/02/03 1.1982.33.9)
[ide] ide-scsi: add basic refcounting
* pointers to a SCSI host and a drive are added to idescsi_scsi_t
* pointer to the SCSI host is stored in disk->private_data
* ide_scsi_{get,put}() is used to {get,put} reference to the SCSI host
<bzolnier@trik.(none)> (05/02/03 1.1982.33.8)
[ide] ide-tape: add basic refcounting
Similar changes as for ide-cd.c.
<bzolnier@trik.(none)> (05/02/03 1.1982.33.7)
[ide] ide-floppy: add basic refcounting
Similar changes as for ide-cd.c.
<bzolnier@trik.(none)> (05/02/03 1.1982.33.6)
[ide] ide-disk: add basic refcounting
Similar changes as for ide-cd.c (except that struct ide_disk_obj is added).
<bzolnier@trik.(none)> (05/02/03 1.1982.33.5)
[ide] ide-cd: add basic refcounting
* based on reference counting in drivers/scsi/{sd,sr}.c
* fixes race between ->open() and ->cleanup() (ide_unregister_subdriver()
tests for drive->usage != 0 but there is no protection against new users)
* struct kref and pointer to a drive are added to struct ide_cdrom_info
* pointer to drive's struct ide_cdrom_info is stored in disk->private_data
* ide_cd_{get,put}() is used to {get,put} reference to struct ide_cdrom_info
* ide_cd_release() is a release method for struct ide_cdrom_info
<bzolnier@trik.(none)> (05/02/03 1.1982.33.4)
[ide] make ide_generic_ioctl() take ide_drive_t * as an argument
As a result disk->private_data can be used by device drivers now.
<bzolnier@trik.(none)> (05/02/03 1.1982.33.3)
[ide] kill setup_driver_defaults()
* move default_do_request() to ide-default.c
* fix drivers to set ide_driver_t->{do_request,end_request,error,abort}
* kill setup_driver_defaults()
<bzolnier@trik.(none)> (05/02/03 1.1982.33.2)
[ide] kill ide_driver_t->capacity
* add private /proc/ide/hd?/capacity handlers to ide-{cd,disk,floppy}.c
* use generic proc_ide_read_capacity() for ide-{scsi,tape}.c
* kill ->capacity, default_capacity() and generic_subdriver_entries[]
<bzolnier@trik.(none)> (05/01/21 1.1966.91.144)
[ide] kill ide_driver_t->pre_reset
Add ide_drive_t->post_reset flag and use it to signal post reset
condition to the ide-tape driver (the only user of ->pre_reset).
<bzolnier@trik.(none)> (05/01/21 1.1966.91.143)
[ide] fix some rare ide-default vs ide-disk races
Some rare races between ide-default and ide-disk are possible, i.e.:
* ide-default is used, I/O request is triggered (ie. /proc/ide/hd?/identify),
drive->special is cleared silently (so CHS is not initialized properly),
ide-disk is loaded and fails if drive uses CHS
* ide-disk is used, drive is resetted, ide-disk is unloaded, ide-default
takes control over drive and on the first I/O request silently clears
drive->special without restoring settings
Fix them by moving idedisk_{special,pre_reset}() and company to IDE core.
<bzolnier@trik.(none)> (05/01/21 1.1966.91.142)
[ide] generic Power Management for IDE devices
Move PM code from ide-cd.c and ide-disk.c to IDE core so:
* PM is supported for other ATAPI devices (floppy, tape)
* PM is supported even if specific driver is not loaded
<bzolnier@trik.(none)> (05/01/21 1.1966.91.141)
[ide] fix drive->ready_stat for ATAPI
ATAPI devices ignore DRDY bit so drive->ready_stat must be set to zero.
It is currently done by device drivers (including ide-default fake driver)
but for PMAC driver it is too late as wait_for_ready() may be called during
probe: probe_hwif()->pmac_ide_dma_check()->pmac_ide_{mdma,udma}_enable()->
->pmac_ide_do_setfeature()->wait_for_ready().
Fixup drive->ready_stat just after detecting ATAPI device.
<bzolnier@trik.(none)> (05/01/21 1.1966.91.140)
[ide] ignore BIOS enable bits for Promise controllers
Since there are no Promise binary drivers for 2.6.x kernels:
* ignore BIOS enable bits completely
* remove CONFIG_PDC202XX_FORCE
* kill IDEPCI_FLAG_FORCE_PDC hack
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/