Re: Someting's busted with serial in 2.6.11 latest

[Russell King]

On Thu, Mar 10, 2005 at 03:40:11PM -0700, Steven Cole wrote:
> I'll test current bk tonight, but I don't see any recent fix to
> drivers/serial/8250.c when browsing linux.bkbits.net/linux-2.6.

Ok, so Stephen's bug is already fixed.  After testing the latest bk, if
you find your bug isn't resolved, please try to isolate the change by
applying this patch.  If this doesn't resolve it, then your change of
behaviour hasn't been caused by changes to 8250.c, but must be down to
some other part of the kernel.

===== linux-2.6-rmk/drivers/serial/8250.c 1.97 vs 1.95 =====
--- 1.97/drivers/serial/8250.c	2005-03-08 10:04:55 +00:00
+++ 1.95/drivers/serial/8250.c	2005-02-28 16:05:18 +00:00
@@ -642,7 +642,6 @@
 static void autoconfig_16550a(struct uart_8250_port *up)
 {
 	unsigned char status1, status2;
-	unsigned int iersave;
 
 	up->port.type = PORT_16550A;
 	up->capabilities |= UART_CAP_FIFO;
@@ -729,7 +728,6 @@
 	serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
 	status2 = serial_in(up, UART_IIR) >> 5;
 	serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
-	serial_outp(up, UART_LCR, 0);
 
 	DEBUG_AUTOCONF("iir1=%d iir2=%d ", status1, status2);
 
@@ -738,40 +736,6 @@
 		up->capabilities |= UART_CAP_AFE | UART_CAP_SLEEP;
 		return;
 	}
-
-	/*
-	 * Try writing and reading the UART_IER_UUE bit (b6).
-	 * If it works, this is probably one of the Xscale platform's
-	 * internal UARTs.
-	 * We're going to explicitly set the UUE bit to 0 before
-	 * trying to write and read a 1 just to make sure it's not
-	 * already a 1 and maybe locked there before we even start start.
-	 */
-	iersave = serial_in(up, UART_IER);
-	serial_outp(up, UART_IER, iersave & ~UART_IER_UUE);
-	if (!(serial_in(up, UART_IER) & UART_IER_UUE)) {
-		/*
-		 * OK it's in a known zero state, try writing and reading
-		 * without disturbing the current state of the other bits.
-		 */
-		serial_outp(up, UART_IER, iersave | UART_IER_UUE);
-		if (serial_in(up, UART_IER) & UART_IER_UUE) {
-			/*
-			 * It's an Xscale.
-			 * We'll leave the UART_IER_UUE bit set to 1 (enabled).
-			 */
-			DEBUG_AUTOCONF("Xscale ");
-			up->port.type = PORT_XSCALE;
-			return;
-		}
-	} else {
-		/*
-		 * If we got here we couldn't force the IER_UUE bit to 0.
-		 * Log it and continue.
-		 */
-		DEBUG_AUTOCONF("Couldn't force IER_UUE to 0 ");
-	}
-	serial_outp(up, UART_IER, iersave);
 }
 
 /*


-- 
Russell King
 Linux kernel    2.6 ARM Linux   - http://www.arm.linux.org.uk/
 maintainer of:  2.6 Serial core
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/