Re: OHCI driver dies on Mac Mini at boot
From: Ben Collins
Date: Mon Mar 14 2005 - 21:20:02 EST
Send me the lspci -v output for this machine.
On Tue, Mar 15, 2005 at 11:25:36AM +1100, Benjamin Herrenschmidt wrote:
> I get this output with current Linus bk :
>
> [ 0.000000] Total memory = 512MB; using 1024kB for hash table (at 80400000)
> [ 0.000000] Linux version 2.6.11-gack (benh@gaston) (gcc version 3.3.5 (Debian 1:3.3.5-8)) #5 Tue Mar 15 11:20:41 EST 2005
> [ 0.000000] Found UniNorth memory controller & host bridge, revision: 210
> [ 0.000000] Mapped at 0xfdd68000
> [ 0.000000] Found a Intrepid mac-io controller, rev: 0, mapped at 0xfdce8000
> [ 0.000000] Processor NAP mode on idle enabled.
> [ 0.000000] PowerMac motherboard: Mac mini
> [ 0.000000] Found UniNorth PCI host bridge at 0xf0000000. Firmware bus number: 0->0
> [ 0.000000] Found UniNorth PCI host bridge at 0xf2000000. Firmware bus number: 0->0
> [ 0.000000] Found UniNorth PCI host bridge at 0xf4000000. Firmware bus number: 0->0
> [ 0.000000] via-pmu: Server Mode is disabled
> [ 0.000000] PMU driver 2 initialized for Core99, firmware: 55
> [ 0.000000] nvram: Checking bank 0...
> [ 0.000000] nvram: gen0=122, gen1=121
> [ 0.000000] nvram: Active bank is: 0
> [ 0.000000] nvram: OF partition at 0x410
> [ 0.000000] nvram: XP partition at 0x1020
> [ 0.000000] nvram: NR partition at 0x1120
> [ 0.000000] On node 0 totalpages: 131072
> [ 0.000000] DMA zone: 131072 pages, LIFO batch:16
> [ 0.000000] Normal zone: 0 pages, LIFO batch:1
> [ 0.000000] HighMem zone: 0 pages, LIFO batch:1
> [ 0.000000] Built 1 zonelists
> [ 0.000000] Kernel command line: s
> [ 0.000000] PowerMac using OpenPIC irq controller at 0x80040000
> [ 0.000000] OpenPIC Version 1.2 (4 CPUs and 64 IRQ sources) at fc496000
> [ 0.000000] OpenPIC timer frequency is 4.166666 MHz
> [ 0.000000] PID hash table entries: 4096 (order: 12, 65536 bytes)
> [ 0.000000] GMT Delta read from XPRAM: 0 minutes, DST: off
> [ 0.000000] time_init: decrementer frequency = 41.620997 MHz
> [ 69.359998] Console: colour dummy device 80x25
> [ 69.360691] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> [ 69.361601] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> [ 69.380943] Memory: 512896k available (2580k kernel code, 1336k data, 176k init, 0k highmem)
> [ 69.380964] System.map loaded at 0x811bd000 for debugger, size: 963019 bytes
> [ 69.380972] AGP special page: 0x9ffff000
> [ 69.381051] Calibrating delay loop... 1413.12 BogoMIPS (lpj=706560)
> [ 69.402356] Mount-cache hash table entries: 512
> [ 69.404165] NET: Registered protocol family 16
> [ 69.405106] PCI: Probing PCI hardware
> [ 69.406287] PCI: Cannot allocate resource region 0 of device 0001:10:18.0
> [ 69.406299] PCI: Cannot allocate resource region 0 of device 0001:10:19.0
> [ 69.406322] Apple USB OHCI 0001:10:18.0 disabled by firmware
> [ 69.406331] Apple USB OHCI 0001:10:19.0 disabled by firmware
> [ 69.406390] Registering openpic with sysfs...
> [ 69.407120] SCSI subsystem initialized
> [ 69.407258] usbcore: registered new driver usbfs
> [ 69.407289] usbcore: registered new driver hub
> [ 69.408749] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
> [ 69.409293] PCI: Enabling device 0000:00:10.0 (0006 -> 0007)
> [ 69.925273] radeonfb (0000:00:10.0): Invalid ROM signature 0 should be0xaa55
> [ 69.925294] radeonfb: Retreived PLL infos from Open Firmware
> [ 69.925303] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=190.00 Mhz, System=250.00 MHz
> [ 69.925314] radeonfb: PLL min 12000 max 35000
> [ 70.517246] radeonfb: Monitor 1 type DFP found
> [ 70.517263] radeonfb: EDID probed
> [ 70.517269] radeonfb: Monitor 2 type DFP found
> [ 70.517275] radeonfb: EDID probed
> [ 70.611713] Console: switching to colour frame buffer device 240x75
> [ 70.611913] radeonfb (0000:00:10.0): ATI Radeon Yb
> [ 70.626083] Generic RTC Driver v1.07
> [ 70.626274] Macintosh non-volatile memory driver v1.1
> [ 70.626540] io scheduler noop registered
> [ 70.626702] io scheduler anticipatory registered
> [ 70.626861] io scheduler deadline registered
> [ 70.627015] io scheduler cfq registered
> [ 70.627552] RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
> [ 70.627979] loop: loaded (max 8 devices)
> [ 70.628137] sungem.c:v0.98 8/24/03 David S. Miller (davem@xxxxxxxxxx)
> [ 70.690585] PHY ID: 4061e4, addr: 0
> [ 70.691210] eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:11:24:76:c8:ea
> [ 70.691524] eth0: Found BCM5221 PHY
> [ 70.691694] pcnet32.c:v1.30i 06.28.2004 tsbogend@xxxxxxxxxxxxxxxx
> [ 70.691954] PPP generic driver version 2.4.2
> [ 70.692139] PPP Deflate Compression module registered
> [ 70.692337] MacIO PCI driver attached to Intrepid chipset
> [ 70.692956] input: Macintosh mouse button emulation
> [ 70.693211] apm_emu: APM Emulation 0.5 initialized.
> [ 70.693421] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> [ 70.693620] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> [ 70.693882] adb: starting probe task...
> [ 70.694008] adb: finished probe task...
> [ 70.694322] PCI: Enabling device 0002:20:0d.0 (0004 -> 0006)
> [ 71.706181] ide0: Found Apple UniNorth ATA-6 controller, bus ID 3, irq 39
> [ 71.706404] Probing IDE interface ide0...
> [ 71.970334] hda: TOSHIBA MK8025GAS, ATA DISK drive
> [ 72.378303] hdb: MATSHITACD-RW CW-8123, ATAPI CD/DVD-ROM drive
> [ 72.429131] hda: Enabling Ultra DMA 5
> [ 72.430274] hdb: Enabling Ultra DMA 2
> [ 72.431454] ide0 at 0xa101a000-0xa101a007,0xa101a160 on irq 39
> [ 73.090239] eth0: Link is up at 100 Mbps, full-duplex.
> [ 73.443069] ide1: Found Apple KeyLargo ATA-3 controller, bus ID 0, irq 24
> [ 73.443287] Probing IDE interface ide1...
> [ 73.962026] ide1: Bus empty, interface released.
> [ 73.962215] hda: max request size: 1024KiB
> [ 74.216212] hda: 156301488 sectors (80026 MB), CHS=16383/255/63, UDMA(100)
> [ 74.216523] hda: cache flushes supported
> [ 74.216723] hda: [mac] hda1 hda2 hda3 hda4 hda5 hda6 hda7 hda8
> [ 74.282414] hdb: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
> [ 74.282712] Uniform CD-ROM driver Revision: 3.20
> [ 74.284641] ide-floppy driver 0.99.newide
> [ 74.284893] mesh: configured for synchronous 5 MB/s
> [ 74.285105] st: Version 20041025, fixed bufsize 32768, s/g segs 256
> [ 74.285418] usbmon: debugs is not available
> [ 74.285553] ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
> [ 74.285592] Apple USB OHCI 0001:10:18.0 disabled by firmware
> [ 74.285773] Apple USB OHCI 0001:10:19.0 disabled by firmware
> [ 74.285954] PCI: Enabling device 0001:10:1a.0 (0000 -> 0002)
> [ 74.295306] ohci_hcd 0001:10:1a.0: Apple Computer Inc. KeyLargo/Intrepid USB (#3)
> [ 74.304588] ohci_hcd 0001:10:1a.0: new USB bus registered, assigned bus number 1
> [ 74.313747] ohci_hcd 0001:10:1a.0: irq 29, io mem 0x80083000
> [ 74.353116] hub 1-0:1.0: USB hub found
> [ 74.362232] hub 1-0:1.0: 2 ports detected
> [ 74.392029] PCI: Enabling device 0001:10:1b.0 (0000 -> 0002)
> [ 74.401126] ohci_hcd 0001:10:1b.0: NEC Corporation USB
> [ 74.410400] ohci_hcd 0001:10:1b.0: new USB bus registered, assigned bus number 2
> [ 74.419646] ohci_hcd 0001:10:1b.0: irq 63, io mem 0x80082000
> [ 74.459072] hub 2-0:1.0: USB hub found
> [ 74.468330] hub 2-0:1.0: 3 ports detected
> [ 74.498025] PCI: Enabling device 0001:10:1b.1 (0000 -> 0002)
> [ 74.507405] ohci_hcd 0001:10:1b.1: NEC Corporation USB (#2)
> [ 74.516803] ohci_hcd 0001:10:1b.1: new USB bus registered, assigned bus number 3
> [ 74.526190] ohci_hcd 0001:10:1b.1: irq 63, io mem 0x80081000
> [ 74.566061] hub 3-0:1.0: USB hub found
> [ 74.575288] hub 3-0:1.0: 2 ports detected
> [ 74.662013] usbcore: registered new driver usbhid
> [ 74.671081] drivers/usb/input/hid-core.c: v2.01:USB HID core driver
> [ 74.680311] mice: PS/2 mouse device common for all mice
> [ 74.689528] oprofile: using timer interrupt.
> [ 74.698770] NET: Registered protocol family 2
> [ 74.718042] IP: routing cache hash table of 4096 buckets, 32Kbytes
> [ 74.727650] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
> [ 74.739914] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
> [ 74.749784] TCP: Hash tables configured (established 131072 bind 65536)
> [ 74.759471] NET: Registered protocol family 1
> [ 74.768982] NET: Registered protocol family 17
> [ 74.788984] usb 2-1: new low speed USB device using ohci_hcd and address 2
> [ 74.798912] EXT3-fs: INFO: recovery required on readonly filesystem.
> [ 74.808580] EXT3-fs: write access will be enabled during recovery.
> [ 74.935605] input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0001:10:1b.0-1
> [ 74.977829] kjournald starting. Commit interval 5 seconds
> [ 74.987617] EXT3-fs: recovery complete.
> [ 74.998266] EXT3-fs: mounted filesystem with ordered data mode.
> [ 75.007984] VFS: Mounted root (ext3 filesystem) readonly.
> [ 75.017680] Freeing unused kernel memory: 176k init 4k chrp 8k prep
> [ 75.229947] usb 3-1: new low speed USB device using ohci_hcd and address 2
> [ 75.401614] input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0001:10:1b.1-1
> [ 75.424797] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0001:10:1b.1-1
> [ 80.639297] Adding 1953116k swap on /dev/hda6. Priority:-1 extents:1
> [ 80.787420] EXT3 FS on hda4, internal journal
> [ 84.020857] ieee1394: Initialized config rom entry `ip1394'
> [ 84.048240] sbp2: $Rev: 1219 $ Ben Collins <bcollins@xxxxxxxxxx>
> [ 84.203758] Found KeyWest i2c on "uni-n", 2 channels, stepping: 4 bits
> [ 84.215110] Found KeyWest i2c on "mac-io", 1 channel, stepping: 4 bits
> [ 85.392553] kjournald starting. Commit interval 5 seconds
> [ 85.402199] EXT3 FS on hda5, internal journal
> [ 85.411612] EXT3-fs: mounted filesystem with ordered data mode.
> [ 85.444911] kjournald starting. Commit interval 5 seconds
> [ 85.454548] EXT3 FS on hda7, internal journal
> [ 85.464029] EXT3-fs: mounted filesystem with ordered data mode.
> [ 88.155217] ohci1394: $Rev: 1250 $ Ben Collins <bcollins@xxxxxxxxxx>
> [ 88.164904] PCI: Enabling device 0002:20:0e.0 (0000 -> 0002)
> [ 88.188723] ohci1394: fw-host0: Unexpected PCI resource length of 1000!
> [ 88.250601] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[2048]
> [ 89.741666] Linux agpgart interface v0.101 (c) Dave Jones
> [ 89.803084] agpgart: Detected Apple UniNorth 2 chipset
> [ 89.812583] agpgart: configuring for size idx: 4
> [ 89.824113] agpgart: AGP aperture is 16M @ 0x0
> [ 89.941059] ohci1394: fw-host0: Unrecoverable error!
> [ 89.950220] ohci1394: fw-host0: Async Req Rcv Context died: ctrl[00008808] cmdptr[1ef28000]
> [ 89.959378] ohci1394: fw-host0: Error in reception of SelfID packets [0x8002000c/0x00000000] (count: 0)
> [ 89.970595] ohci1394: fw-host0: SelfID received outside of bus reset sequence
> [ 90.235036] ieee1394: impossible ack_complete from node 65535 (tcode 4)
> [ 90.244330] ieee1394: Current remote IRM is not 1394a-2000 compliant, resetting...
> [ 90.246363] ohci1394: fw-host0: Error in reception of SelfID packets [0x8004000c/0x00000000] (count: 1)
> [ 90.257846] ohci1394: fw-host0: SelfID received outside of bus reset sequence
> [ 90.513026] ieee1394: impossible ack_complete from node 65535 (tcode 4)
> [ 90.522642] ieee1394: Current remote IRM is not 1394a-2000 compliant, resetting...
> [ 90.524673] ohci1394: fw-host0: Error in reception of SelfID packets [0x8006000c/0x00000000] (count: 2)
> [ 90.536379] ohci1394: fw-host0: SelfID received outside of bus reset sequence
> [ 90.801002] ieee1394: impossible ack_complete from node 65535 (tcode 4)
> [ 90.810758] ieee1394: Current remote IRM is not 1394a-2000 compliant, resetting...
> [ 90.812788] ohci1394: fw-host0: Error in reception of SelfID packets [0x8008000c/0x00000000] (count: 3)
> [ 90.824645] ohci1394: fw-host0: SelfID received outside of bus reset sequence
> [ 91.079999] ieee1394: impossible ack_complete from node 65535 (tcode 4)
> [ 91.089869] ieee1394: Current remote IRM is not 1394a-2000 compliant, resetting...
> [ 91.091900] ohci1394: fw-host0: Error in reception of SelfID packets [0x800a000c/0x00000000] (count: 4)
> [ 91.104034] ohci1394: fw-host0: SelfID received outside of bus reset sequence
> [ 91.375966] ieee1394: impossible ack_complete from node 65535 (tcode 4)
> [ 91.386009] ieee1394: Current remote IRM is not 1394a-2000 compliant, resetting...
> [ 91.388038] ohci1394: fw-host0: Error in reception of SelfID packets [0x800c000c/0x00000000] (count: 5)
> [ 91.400264] ohci1394: fw-host0: SelfID received outside of bus reset sequence
> [ 91.655954] ieee1394: impossible ack_complete from node 65535 (tcode 4)
> [ 91.666503] ieee1394: Current remote IRM is not 1394a-2000 compliant, resetting...
> [ 91.666507] ieee1394: Stopping reset loop for IRM sanity
> [ 96.598155] eth0: Link is up at 100 Mbps, full-duplex.
> [ 96.608017] eth0: Pause is disabled
>
>
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> mailing list linux1394-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.sourceforge.net/lists/listinfo/linux1394-devel
--
Debian - http://www.debian.org/
Linux 1394 - http://www.linux1394.org/
Subversion - http://subversion.tigris.org/
WatchGuard - http://www.watchguard.com/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/