Holger Kiehl <Holger.Kiehl@xxxxxx> wrote:No. For now I just leave it as module.
Hello
On a four CPU Opteron compiling the Fusion-MPT as module gives much better
performance when compiling it in, here some bonnie++ results:
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
compiled in 15872M 38366 71 65602 22 18348 4 53276 84 57947 7 905.4 2
module 15872M 51246 96 204914 70 57236 14 59779 96 264171 33 923.0 2
This happens with 2.6.10, 2.6.11 and 2.6.11-bk2. Controller is a
Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI.
Why is there such a large difference?
Holger, this problem remains unresolved, does it not? Have you done any
more experimentation?
I must say that something funny seems to be happening here. I have twoGot the same result when compiled in, always between 12 and 13 MB/s. As
MPT-based Dell machines, neither of which is using a modular driver:
akpm:/usr/src/25> 0 hdparm -t /dev/sda
/dev/sda:
Timing buffered disk reads: 64 MB in 5.00 seconds = 12.80 MB/sec