[patch] move SA_xxx defines to linux/signal.h

From: Stas Sergeev
Date: Fri Apr 01 2005 - 07:40:00 EST

Next message: Evgeniy Polyakov: "[RFC] : remove unreliable, unused and unmainained arch from kernel."
Previous message: Paul Mackerras: "[PATCH] ppc64: Export re{serv,leas}e_pmc_hardware() for oprofile"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi Andrew.

The attached patch moves the
IRQ-related SA_xxx flags (namely,
SA_PROBE, SA_SAMPLE_RANDOM and
SA_SHIRQ) from all the arch-specific
headers to linux/signal.h.
This looks like a left-over after
the irq-handling code was consolidated.
The code was moved to kernel/irq/*, but
the flags are still left per-arch.

Right now, adding a new IRQ flag to the
arch-specific header, like this patch
does:
http://cvs.sourceforge.net/viewcvs.py/*checkout*/alsa/alsa-driver/utils/patches/pcsp-kernel-2.6.10-03.diff?rev=1.1
no longer works, it breaks the compilation
for all other arches, unless you add that
flag to all the other arch-specific headers
too. So I think such a clean-up makes sense.

Can this please be applied?
Unfortunately I have tested it on x86 only.

Signed-off-by: Stas Sergeev <stsp@xxxxxxxx>

diff -ur linux-2.6.11/include/asm-alpha/signal.h linux-2.6.11-hdr/include/asm-alpha/signal.h
--- linux-2.6.11/include/asm-alpha/signal.h 2005-01-17 09:36:46.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-alpha/signal.h 2005-03-09 11:17:45.000000000 +0300
@@ -109,20 +109,6 @@
#define MINSIGSTKSZ 4096
#define SIGSTKSZ 16384

-
-#ifdef __KERNEL__
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- */
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x40000000
-#endif
-
#define SIG_BLOCK 1 /* for blocking signals */
#define SIG_UNBLOCK 2 /* for unblocking signals */
#define SIG_SETMASK 3 /* for setting the signal mask */
diff -ur linux-2.6.11/include/asm-arm/signal.h linux-2.6.11-hdr/include/asm-arm/signal.h
--- linux-2.6.11/include/asm-arm/signal.h 2005-01-17 09:36:41.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-arm/signal.h 2005-03-09 11:33:19.000000000 +0300
@@ -114,18 +114,7 @@
#define SIGSTKSZ 8192

#ifdef __KERNEL__
-
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- */
-#define SA_PROBE 0x80000000
-#define SA_SAMPLE_RANDOM 0x10000000
#define SA_IRQNOMASK 0x08000000
-#define SA_SHIRQ 0x04000000
#endif

#define SIG_BLOCK 0 /* for blocking signals */
diff -ur linux-2.6.11/include/asm-arm26/signal.h linux-2.6.11-hdr/include/asm-arm26/signal.h
--- linux-2.6.11/include/asm-arm26/signal.h 2005-01-17 09:36:47.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-arm26/signal.h 2005-03-09 11:39:28.000000000 +0300
@@ -114,18 +114,7 @@
#define SIGSTKSZ 8192

#ifdef __KERNEL__
-
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- */
-#define SA_PROBE 0x80000000
-#define SA_SAMPLE_RANDOM 0x10000000
#define SA_IRQNOMASK 0x08000000
-#define SA_SHIRQ 0x04000000
#endif

#define SIG_BLOCK 0 /* for blocking signals */
diff -ur linux-2.6.11/include/asm-cris/signal.h linux-2.6.11-hdr/include/asm-cris/signal.h
--- linux-2.6.11/include/asm-cris/signal.h 2005-01-17 09:36:38.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-cris/signal.h 2005-03-09 11:34:52.000000000 +0300
@@ -108,20 +108,6 @@
#define MINSIGSTKSZ 2048
#define SIGSTKSZ 8192

-#ifdef __KERNEL__
-
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support
- */
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x04000000
-#endif
-
#define SIG_BLOCK 0 /* for blocking signals */
#define SIG_UNBLOCK 1 /* for unblocking signals */
#define SIG_SETMASK 2 /* for setting the signal mask */
diff -ur linux-2.6.11/include/asm-frv/signal.h linux-2.6.11-hdr/include/asm-frv/signal.h
--- linux-2.6.11/include/asm-frv/signal.h 2005-01-17 09:42:36.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-frv/signal.h 2005-03-09 11:16:45.000000000 +0300
@@ -107,20 +107,6 @@
#define MINSIGSTKSZ 2048
#define SIGSTKSZ 8192

-#ifdef __KERNEL__
-
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- */
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x04000000
-#endif
-
#define SIG_BLOCK 0 /* for blocking signals */
#define SIG_UNBLOCK 1 /* for unblocking signals */
#define SIG_SETMASK 2 /* for setting the signal mask */
diff -ur linux-2.6.11/include/asm-h8300/signal.h linux-2.6.11-hdr/include/asm-h8300/signal.h
--- linux-2.6.11/include/asm-h8300/signal.h 2005-01-17 09:36:46.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-h8300/signal.h 2005-03-09 11:17:59.000000000 +0300
@@ -107,19 +107,6 @@
#define MINSIGSTKSZ 2048
#define SIGSTKSZ 8192

-#ifdef __KERNEL__
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- */
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x04000000
-#endif
-
#define SIG_BLOCK 0 /* for blocking signals */
#define SIG_UNBLOCK 1 /* for unblocking signals */
#define SIG_SETMASK 2 /* for setting the signal mask */
diff -ur linux-2.6.11/include/asm-i386/signal.h linux-2.6.11-hdr/include/asm-i386/signal.h
--- linux-2.6.11/include/asm-i386/signal.h 2005-01-17 09:36:45.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-i386/signal.h 2005-03-09 11:14:42.000000000 +0300
@@ -110,20 +110,6 @@
#define MINSIGSTKSZ 2048
#define SIGSTKSZ 8192

-#ifdef __KERNEL__
-
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- */
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x04000000
-#endif
-
#define SIG_BLOCK 0 /* for blocking signals */
#define SIG_UNBLOCK 1 /* for unblocking signals */
#define SIG_SETMASK 2 /* for setting the signal mask */
diff -ur linux-2.6.11/include/asm-ia64/signal.h linux-2.6.11-hdr/include/asm-ia64/signal.h
--- linux-2.6.11/include/asm-ia64/signal.h 2005-02-21 11:02:00.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-ia64/signal.h 2005-03-09 11:20:29.000000000 +0300
@@ -114,16 +114,6 @@
#define _NSIG_BPW 64
#define _NSIG_WORDS (_NSIG / _NSIG_BPW)

-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- */
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x04000000
#define SA_PERCPU_IRQ 0x02000000

#endif /* __KERNEL__ */
diff -ur linux-2.6.11/include/asm-m32r/signal.h linux-2.6.11-hdr/include/asm-m32r/signal.h
--- linux-2.6.11/include/asm-m32r/signal.h 2005-01-17 09:36:40.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-m32r/signal.h 2005-03-09 11:33:35.000000000 +0300
@@ -114,20 +114,6 @@
#define MINSIGSTKSZ 2048
#define SIGSTKSZ 8192

-#ifdef __KERNEL__
-
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- */
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x04000000
-#endif
-
#define SIG_BLOCK 0 /* for blocking signals */
#define SIG_UNBLOCK 1 /* for unblocking signals */
#define SIG_SETMASK 2 /* for setting the signal mask */
diff -ur linux-2.6.11/include/asm-m68k/signal.h linux-2.6.11-hdr/include/asm-m68k/signal.h
--- linux-2.6.11/include/asm-m68k/signal.h 2005-01-17 09:36:46.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-m68k/signal.h 2005-03-09 11:18:16.000000000 +0300
@@ -105,19 +105,6 @@
#define MINSIGSTKSZ 2048
#define SIGSTKSZ 8192

-#ifdef __KERNEL__
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- */
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x04000000
-#endif
-
#define SIG_BLOCK 0 /* for blocking signals */
#define SIG_UNBLOCK 1 /* for unblocking signals */
#define SIG_SETMASK 2 /* for setting the signal mask */
diff -ur linux-2.6.11/include/asm-m68knommu/signal.h linux-2.6.11-hdr/include/asm-m68knommu/signal.h
--- linux-2.6.11/include/asm-m68knommu/signal.h 2005-01-17 09:36:44.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-m68knommu/signal.h 2005-03-09 11:32:07.000000000 +0300
@@ -105,19 +105,6 @@
#define MINSIGSTKSZ 2048
#define SIGSTKSZ 8192

-#ifdef __KERNEL__
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- */
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x04000000
-#endif
-
#define SIG_BLOCK 0 /* for blocking signals */
#define SIG_UNBLOCK 1 /* for unblocking signals */
#define SIG_SETMASK 2 /* for setting the signal mask */
diff -ur linux-2.6.11/include/asm-mips/signal.h linux-2.6.11-hdr/include/asm-mips/signal.h
--- linux-2.6.11/include/asm-mips/signal.h 2005-01-17 09:36:39.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-mips/signal.h 2005-03-09 11:34:41.000000000 +0300
@@ -98,21 +98,6 @@
#define MINSIGSTKSZ 2048
#define SIGSTKSZ 8192

-#ifdef __KERNEL__
-
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ flag is for shared interrupt support on PCI and EISA.
- */
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x02000000
-
-#endif /* __KERNEL__ */
-
#define SIG_BLOCK 1 /* for blocking signals */
#define SIG_UNBLOCK 2 /* for unblocking signals */
#define SIG_SETMASK 3 /* for setting the signal mask */
diff -ur linux-2.6.11/include/asm-parisc/signal.h linux-2.6.11-hdr/include/asm-parisc/signal.h
--- linux-2.6.11/include/asm-parisc/signal.h 2005-01-17 09:36:40.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-parisc/signal.h 2005-03-09 11:34:00.000000000 +0300
@@ -89,17 +89,6 @@
#define _NSIG_BPW BITS_PER_LONG
#define _NSIG_WORDS (_NSIG / _NSIG_BPW)

-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- */
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x04000000
-
#endif /* __KERNEL__ */

#define SIG_BLOCK 0 /* for blocking signals */
diff -ur linux-2.6.11/include/asm-ppc/signal.h linux-2.6.11-hdr/include/asm-ppc/signal.h
--- linux-2.6.11/include/asm-ppc/signal.h 2005-01-17 09:42:36.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-ppc/signal.h 2005-03-09 11:34:13.000000000 +0300
@@ -99,19 +99,6 @@

#define MINSIGSTKSZ 2048
#define SIGSTKSZ 8192
-#ifdef __KERNEL__
-
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- */
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x04000000
-#endif /* __KERNEL__ */

#define SIG_BLOCK 0 /* for blocking signals */
#define SIG_UNBLOCK 1 /* for unblocking signals */
diff -ur linux-2.6.11/include/asm-ppc64/signal.h linux-2.6.11-hdr/include/asm-ppc64/signal.h
--- linux-2.6.11/include/asm-ppc64/signal.h 2005-01-17 09:36:45.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-ppc64/signal.h 2005-03-09 11:21:53.000000000 +0300
@@ -96,19 +96,6 @@

#define MINSIGSTKSZ 2048
#define SIGSTKSZ 8192
-#ifdef __KERNEL__
-
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- */
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x04000000
-#endif

#define SIG_BLOCK 0 /* for blocking signals */
#define SIG_UNBLOCK 1 /* for unblocking signals */
diff -ur linux-2.6.11/include/asm-s390/signal.h linux-2.6.11-hdr/include/asm-s390/signal.h
--- linux-2.6.11/include/asm-s390/signal.h 2005-01-17 09:36:46.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-s390/signal.h 2005-03-09 11:17:16.000000000 +0300
@@ -117,20 +117,6 @@
#define MINSIGSTKSZ 2048
#define SIGSTKSZ 8192

-#ifdef __KERNEL__
-
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- */
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x04000000
-#endif
-
#define SIG_BLOCK 0 /* for blocking signals */
#define SIG_UNBLOCK 1 /* for unblocking signals */
#define SIG_SETMASK 2 /* for setting the signal mask */
diff -ur linux-2.6.11/include/asm-sh/signal.h linux-2.6.11-hdr/include/asm-sh/signal.h
--- linux-2.6.11/include/asm-sh/signal.h 2005-01-17 09:36:40.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-sh/signal.h 2005-03-09 11:34:26.000000000 +0300
@@ -108,20 +108,6 @@
#define MINSIGSTKSZ 2048
#define SIGSTKSZ 8192

-#ifdef __KERNEL__
-
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- */
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x04000000
-#endif
-
#define SIG_BLOCK 0 /* for blocking signals */
#define SIG_UNBLOCK 1 /* for unblocking signals */
#define SIG_SETMASK 2 /* for setting the signal mask */
diff -ur linux-2.6.11/include/asm-sh64/signal.h linux-2.6.11-hdr/include/asm-sh64/signal.h
--- linux-2.6.11/include/asm-sh64/signal.h 2005-01-17 09:36:44.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-sh64/signal.h 2005-03-09 11:32:19.000000000 +0300
@@ -107,20 +107,6 @@
#define MINSIGSTKSZ 2048
#define SIGSTKSZ THREAD_SIZE

-#ifdef __KERNEL__
-
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- */
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x04000000
-#endif
-
#define SIG_BLOCK 0 /* for blocking signals */
#define SIG_UNBLOCK 1 /* for unblocking signals */
#define SIG_SETMASK 2 /* for setting the signal mask */
diff -ur linux-2.6.11/include/asm-sparc/signal.h linux-2.6.11-hdr/include/asm-sparc/signal.h
--- linux-2.6.11/include/asm-sparc/signal.h 2005-01-17 09:36:44.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-sparc/signal.h 2005-03-09 11:31:12.000000000 +0300
@@ -143,7 +143,6 @@
#define SA_ONESHOT _SV_RESET
#define SA_INTERRUPT 0x10u
#define SA_NOMASK 0x20u
-#define SA_SHIRQ 0x40u
#define SA_NOCLDWAIT 0x100u
#define SA_SIGINFO 0x200u

@@ -162,11 +161,6 @@

#ifdef __KERNEL__
/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- *
* DJHR
* SA_STATIC_ALLOC is used for the SPARC system to indicate that this
* interrupt handler's irq structure should be statically allocated
@@ -177,8 +171,6 @@
* statically allocated data.. which is NOT GOOD.
*
*/
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
#define SA_STATIC_ALLOC 0x80
#endif

diff -ur linux-2.6.11/include/asm-sparc64/signal.h linux-2.6.11-hdr/include/asm-sparc64/signal.h
--- linux-2.6.11/include/asm-sparc64/signal.h 2005-01-17 09:36:44.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-sparc64/signal.h 2005-03-09 11:31:49.000000000 +0300
@@ -145,7 +145,6 @@
#define SA_ONESHOT _SV_RESET
#define SA_INTERRUPT 0x10u
#define SA_NOMASK 0x20u
-#define SA_SHIRQ 0x40u
#define SA_NOCLDWAIT 0x100u
#define SA_SIGINFO 0x200u

@@ -165,11 +164,6 @@

#ifdef __KERNEL__
/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- *
* DJHR
* SA_STATIC_ALLOC is used for the SPARC system to indicate that this
* interrupt handler's irq structure should be statically allocated
@@ -180,8 +174,6 @@
* statically allocated data.. which is NOT GOOD.
*
*/
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
#define SA_STATIC_ALLOC 0x80
#endif

diff -ur linux-2.6.11/include/asm-v850/signal.h linux-2.6.11-hdr/include/asm-v850/signal.h
--- linux-2.6.11/include/asm-v850/signal.h 2005-01-17 09:36:45.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-v850/signal.h 2005-03-09 11:21:02.000000000 +0300
@@ -110,21 +110,6 @@
#define MINSIGSTKSZ 2048
#define SIGSTKSZ 8192

-
-#ifdef __KERNEL__
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- */
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x04000000
-#endif /* __KERNEL__ */
-
-
#define SIG_BLOCK 0 /* for blocking signals */
#define SIG_UNBLOCK 1 /* for unblocking signals */
#define SIG_SETMASK 2 /* for setting the signal mask */
diff -ur linux-2.6.11/include/asm-x86_64/signal.h linux-2.6.11-hdr/include/asm-x86_64/signal.h
--- linux-2.6.11/include/asm-x86_64/signal.h 2005-01-17 09:36:44.000000000 +0300
+++ linux-2.6.11-hdr/include/asm-x86_64/signal.h 2005-03-09 11:32:36.000000000 +0300
@@ -116,20 +116,6 @@
#define MINSIGSTKSZ 2048
#define SIGSTKSZ 8192

-#ifdef __KERNEL__
-
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- */
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x04000000
-#endif
-
#define SIG_BLOCK 0 /* for blocking signals */
#define SIG_UNBLOCK 1 /* for unblocking signals */
#define SIG_SETMASK 2 /* for setting the signal mask */
diff -ur linux-2.6.11/include/linux/signal.h linux-2.6.11-hdr/include/linux/signal.h
--- linux-2.6.11/include/linux/signal.h 2005-01-17 09:36:43.000000000 +0300
+++ linux-2.6.11-hdr/include/linux/signal.h 2005-03-09 11:15:32.000000000 +0300
@@ -9,6 +9,17 @@
#ifdef __KERNEL__

/*
+ * These values of sa_flags are used only by the kernel as part of the
+ * irq handling routines.
+ *
+ * SA_INTERRUPT is also used by the irq handling routines.
+ * SA_SHIRQ is for shared interrupt support on PCI and EISA.
+ */
+#define SA_PROBE SA_ONESHOT
+#define SA_SAMPLE_RANDOM SA_RESTART
+#define SA_SHIRQ 0x04000000
+
+/*
* Real Time signals may be queued.
*/

Next message: Evgeniy Polyakov: "[RFC] : remove unreliable, unused and unmainained arch from kernel."
Previous message: Paul Mackerras: "[PATCH] ppc64: Export re{serv,leas}e_pmc_hardware() for oprofile"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]