[BK PATCHES] ide-2.6 update

[Bartlomiej Zolnierkiewicz]

Hi Linus,

short ChangeLog:
* ide-default pseudo-driver is gone
* VIA resume failure is fixed

Bartlomiej

Please do a

	bk pull bk://bart.bkbits.net/ide-2.6

This will update the following files:

 drivers/ide/ide-default.c   |   76 ---------------------------
 drivers/ide/Makefile        |    3 -
 drivers/ide/ide-cd.c        |   71 ++++++++++++++++---------
 drivers/ide/ide-cd.h        |    2
 drivers/ide/ide-disk.c      |   30 ++++++++--
 drivers/ide/ide-dma.c       |    8 ++
 drivers/ide/ide-floppy.c    |   48 ++++++++++++-----
 drivers/ide/ide-io.c        |   46 ++++++++++++----
 drivers/ide/ide-probe.c     |  122 +++++++++++++++++++++++---------------------
 drivers/ide/ide-proc.c      |   12 +---
 drivers/ide/ide-tape.c      |   41 ++++++++++++--
 drivers/ide/ide-taskfile.c  |   11 ++-
 drivers/ide/ide.c           |   86 ++++++++++++-------------------
 drivers/ide/pci/via82cxxx.c |    7 --
 drivers/scsi/ide-scsi.c     |   44 ++++++++++++---
 include/linux/ide.h         |    6 +-
 16 files changed, 338 insertions(+), 275 deletions(-)

through these ChangeSets:

<bzolnier@trik.(none)> (05/04/02 1.2351)
   [ide] fix via82cxxx resume failure

   With David Woodhouse <dwmw2@xxxxxxxxxxxxx>.

   On resume from sleep, via_set_speed() doesn't reinstate the correct
   mode, because it thinks the drive is already configured correctly.

   Also kill redundant printk, ide_config_drive_speed() warns about errors.

   Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>

<bzolnier@trik.(none)> (05/04/02 1.2350)
   [ide] kill ide-default

   * add ide_drives list to list devices without a driver
   * add __ide_add_setting() and use it for adding no auto remove entries
   * kill ide-default pseudo-driver

   Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>

<bzolnier@trik.(none)> (05/04/02 1.2349)
   [ide] get driver from rq->rq_disk->private_data

   * add ide_driver_t * to device drivers objects
   * set it to point at driver's ide_driver_t
   * store address of this entry in disk->private_data
   * fix ide_{cd,disk,floppy,tape,scsi}_g accordingly
   * use rq->rq_disk->private_data instead of drive->driver
     to obtain driver (this allows us to kill ide-default)

   ide_dma_intr() OOPS fixed by Tejun Heo <htejun@xxxxxxxxx>.

   Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>

<bzolnier@trik.(none)> (05/04/02 1.2348)
   [ide] kill ide_drive_t->disk

   * move ->disk from ide_drive_t to driver specific objects
   * make drivers allocate struct gendisk and setup rq->rq_disk
     (there is no need to do this for REQ_DRIVE_TASKFILE requests)
   * add ide_init_disk() helper and kill alloc_disks() in ide-probe.c
   * kill no longer needed ide_open() and ide_fops[] in ide.c

   ide_init_disk() fixed by Andrew Morton <akpm@xxxxxxxx>.

   Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>

<bzolnier@trik.(none)> (05/04/02 1.2347)
   [ide] add ide_{un}register_region()

   Add ide_{un}register_region() and fix ide-{tape,scsi}.c to register
   block device number ranges.  In ata_probe() only probe for modules.

   Behavior is unchanged because:
   * if driver is already loaded and attached to drive ata_probe()
     is not called et all
   * if driver is loaded by ata_probe() it will register new number range
     for a drive and this range will be found by kobj_lookup()

   If this is not clear please read http://lwn.net/Articles/25711/
   and see drivers/base/map.c.

   This patch makes it possible to move drive->disk allocation from
   ide-probe.c to device drivers.

   Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>

<bzolnier@trik.(none)> (05/04/02 1.2346)
   [ide] destroy_proc_ide_device() cleanup

   When this function is called device is already unbinded from a
   driver so there are no driver /proc entries to remove.

   Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>

<bzolnier@trik.(none)> (05/04/02 1.2345)
   [ide] drive->dsc_overlap fix

   drive->dsc_overlap is supported only by ide-{cd,tape} drivers.
   Add missing clearing of ->dsc_overlap to ide_{cd,tape}_release()
   and move ->dsc_overlap setup from ide_register_subdriver() to
   ide_cdrom_setup() (ide-tape enables it unconditionally).

   Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>

<bzolnier@trik.(none)> (05/04/02 1.2344)
   [ide] drive->nice1 fix

   It is drive's property independent of the driver being used so move
   drive->nice1 setup from ide_register_subdriver() to probe_hwif() in
   ide-probe.c.  As a result changing a driver which controls the drive
   no longer affects this flag.

   Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/