Re: Processes stuck on D state on Dual Opteron

[Andrew Morton]

Claudio Martins <ctpm@xxxxxxxxxxxxxx> wrote:
>
>    While stress testing 2.6.12-rc2 on an HP DL145 I get processes stuck in D 
>  state after some time.  
>    This machine is a dual Opteron 248 with 2GB (ECC) on one node (the other 
>  node has no RAM modules plugged in, since this board works only with pairs).
> 
>    I was using stress (http://weather.ou.edu/~apw/projects/stress/) with the 
>  following command line:
> 
>  stress -v -c 20 -i 12 -m 10 -d 20
> 
>    This causes a constant load avg. of around 70, makes the machine go into 
>  swap a little, and writes up to about 20GB of random data to disk while 
>  eating up all CPU. After about half and hour random processes like top, df, 
>  etc get stuck in D state. Half of the 60 or so stress processes are also in D 
>  state. The machine keeps being responsive for maybe some 15 minutes but then 
>  the shells just hang and sshd stops responding to connections, though the 
>  machine replies to pings (I don't have console acess till tomorrow).
> 
>    The system is using ext3 with md software Raid1.
> 
>   I'm interested in knowing if anyone out there with dual Opterons can 
>  reproduce this or not. I also have access to an HP DL360 Dual Xeon, so I will 
>  try to find out if this is AMD64 specific as soon as possible. Please let me 
>  know if you want me to run some other tests or give some more info to help 
>  solve this one.

Can you capture the output from alt-sysrq-T?
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/