[2.6 patch] drivers/net/sk98lin/: possible cleanups
From: Adrian Bunk
Date: Tue Apr 19 2005 - 21:20:30 EST
This patch contains the following possible cleanups:
- make needlessly global functions static
- remove unused code
Signed-off-by: Adrian Bunk <bunk@xxxxxxxxx>
---
drivers/net/sk98lin/h/skaddr.h | 48 ---
drivers/net/sk98lin/h/skcsum.h | 6
drivers/net/sk98lin/h/skdrv2nd.h | 1
drivers/net/sk98lin/h/skgeinit.h | 56 ---
drivers/net/sk98lin/h/skgepnmi.h | 4
drivers/net/sk98lin/h/skgesirq.h | 1
drivers/net/sk98lin/h/ski2c.h | 3
drivers/net/sk98lin/h/skvpd.h | 15 -
drivers/net/sk98lin/skaddr.c | 35 +-
drivers/net/sk98lin/skcsum.c | 252 ----------------
drivers/net/sk98lin/skgeinit.c | 148 ---------
drivers/net/sk98lin/skgemib.c | 7
drivers/net/sk98lin/skgepnmi.c | 153 ----------
drivers/net/sk98lin/skgesirq.c | 24 -
drivers/net/sk98lin/ski2c.c | 6
drivers/net/sk98lin/sklm80.c | 72 ----
drivers/net/sk98lin/skrlmt.c | 1
drivers/net/sk98lin/skvpd.c | 108 -------
drivers/net/sk98lin/skxmac2.c | 461 -------------------------------
19 files changed, 40 insertions(+), 1361 deletions(-)
--- linux-2.6.12-rc2-mm3-full/drivers/net/sk98lin/h/skaddr.h.old 2005-04-19 23:34:34.000000000 +0200
+++ linux-2.6.12-rc2-mm3-full/drivers/net/sk98lin/h/skaddr.h 2005-04-19 23:42:57.000000000 +0200
@@ -236,18 +236,6 @@
SK_U32 PortNumber,
int Flags);
-extern int SkAddrXmacMcClear(
- SK_AC *pAC,
- SK_IOC IoC,
- SK_U32 PortNumber,
- int Flags);
-
-extern int SkAddrGmacMcClear(
- SK_AC *pAC,
- SK_IOC IoC,
- SK_U32 PortNumber,
- int Flags);
-
extern int SkAddrMcAdd(
SK_AC *pAC,
SK_IOC IoC,
@@ -255,35 +243,11 @@
SK_MAC_ADDR *pMc,
int Flags);
-extern int SkAddrXmacMcAdd(
- SK_AC *pAC,
- SK_IOC IoC,
- SK_U32 PortNumber,
- SK_MAC_ADDR *pMc,
- int Flags);
-
-extern int SkAddrGmacMcAdd(
- SK_AC *pAC,
- SK_IOC IoC,
- SK_U32 PortNumber,
- SK_MAC_ADDR *pMc,
- int Flags);
-
extern int SkAddrMcUpdate(
SK_AC *pAC,
SK_IOC IoC,
SK_U32 PortNumber);
-extern int SkAddrXmacMcUpdate(
- SK_AC *pAC,
- SK_IOC IoC,
- SK_U32 PortNumber);
-
-extern int SkAddrGmacMcUpdate(
- SK_AC *pAC,
- SK_IOC IoC,
- SK_U32 PortNumber);
-
extern int SkAddrOverride(
SK_AC *pAC,
SK_IOC IoC,
@@ -297,18 +261,6 @@
SK_U32 PortNumber,
int NewPromMode);
-extern int SkAddrXmacPromiscuousChange(
- SK_AC *pAC,
- SK_IOC IoC,
- SK_U32 PortNumber,
- int NewPromMode);
-
-extern int SkAddrGmacPromiscuousChange(
- SK_AC *pAC,
- SK_IOC IoC,
- SK_U32 PortNumber,
- int NewPromMode);
-
#ifndef SK_SLIM
extern int SkAddrSwap(
SK_AC *pAC,
--- linux-2.6.12-rc2-mm3-full/drivers/net/sk98lin/skaddr.c.old 2005-04-19 23:34:50.000000000 +0200
+++ linux-2.6.12-rc2-mm3-full/drivers/net/sk98lin/skaddr.c 2005-04-20 00:01:12.000000000 +0200
@@ -87,6 +87,21 @@
static int Next0[SK_MAX_MACS] = {0};
#endif /* DEBUG */
+static int SkAddrGmacMcAdd(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber,
+ SK_MAC_ADDR *pMc, int Flags);
+static int SkAddrGmacMcClear(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber,
+ int Flags);
+static int SkAddrGmacMcUpdate(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber);
+static int SkAddrGmacPromiscuousChange(SK_AC *pAC, SK_IOC IoC,
+ SK_U32 PortNumber, int NewPromMode);
+static int SkAddrXmacMcAdd(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber,
+ SK_MAC_ADDR *pMc, int Flags);
+static int SkAddrXmacMcClear(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber,
+ int Flags);
+static int SkAddrXmacMcUpdate(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber);
+static int SkAddrXmacPromiscuousChange(SK_AC *pAC, SK_IOC IoC,
+ SK_U32 PortNumber, int NewPromMode);
+
/* functions ******************************************************************/
/******************************************************************************
@@ -372,7 +387,7 @@
* SK_ADDR_SUCCESS
* SK_ADDR_ILLEGAL_PORT
*/
-int SkAddrXmacMcClear(
+static int SkAddrXmacMcClear(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* I/O context */
SK_U32 PortNumber, /* Index of affected port */
@@ -429,7 +444,7 @@
* SK_ADDR_SUCCESS
* SK_ADDR_ILLEGAL_PORT
*/
-int SkAddrGmacMcClear(
+static int SkAddrGmacMcClear(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* I/O context */
SK_U32 PortNumber, /* Index of affected port */
@@ -519,7 +534,7 @@
* Returns:
* Hash value of multicast address.
*/
-SK_U32 SkXmacMcHash(
+static SK_U32 SkXmacMcHash(
unsigned char *pMc) /* Multicast address */
{
SK_U32 Idx;
@@ -557,7 +572,7 @@
* Returns:
* Hash value of multicast address.
*/
-SK_U32 SkGmacMcHash(
+static SK_U32 SkGmacMcHash(
unsigned char *pMc) /* Multicast address */
{
SK_U32 Data;
@@ -672,7 +687,7 @@
* SK_MC_ILLEGAL_ADDRESS
* SK_MC_RLMT_OVERFLOW
*/
-int SkAddrXmacMcAdd(
+static int SkAddrXmacMcAdd(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* I/O context */
SK_U32 PortNumber, /* Port Number */
@@ -778,7 +793,7 @@
* SK_MC_FILTERING_INEXACT
* SK_MC_ILLEGAL_ADDRESS
*/
-int SkAddrGmacMcAdd(
+static int SkAddrGmacMcAdd(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* I/O context */
SK_U32 PortNumber, /* Port Number */
@@ -937,7 +952,7 @@
* SK_MC_FILTERING_INEXACT
* SK_ADDR_ILLEGAL_PORT
*/
-int SkAddrXmacMcUpdate(
+static int SkAddrXmacMcUpdate(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* I/O context */
SK_U32 PortNumber) /* Port Number */
@@ -1082,7 +1097,7 @@
* SK_MC_FILTERING_INEXACT
* SK_ADDR_ILLEGAL_PORT
*/
-int SkAddrGmacMcUpdate(
+static int SkAddrGmacMcUpdate(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* I/O context */
SK_U32 PortNumber) /* Port Number */
@@ -1468,7 +1483,7 @@
* SK_ADDR_SUCCESS
* SK_ADDR_ILLEGAL_PORT
*/
-int SkAddrXmacPromiscuousChange(
+static int SkAddrXmacPromiscuousChange(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* I/O context */
SK_U32 PortNumber, /* port whose promiscuous mode changes */
@@ -1585,7 +1600,7 @@
* SK_ADDR_SUCCESS
* SK_ADDR_ILLEGAL_PORT
*/
-int SkAddrGmacPromiscuousChange(
+static int SkAddrGmacPromiscuousChange(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* I/O context */
SK_U32 PortNumber, /* port whose promiscuous mode changes */
--- linux-2.6.12-rc2-mm3-full/drivers/net/sk98lin/h/skcsum.h.old 2005-04-19 23:44:51.000000000 +0200
+++ linux-2.6.12-rc2-mm3-full/drivers/net/sk98lin/h/skcsum.h 2005-04-19 23:45:01.000000000 +0200
@@ -203,12 +203,6 @@
unsigned Checksum2,
int NetNumber);
-extern void SkCsGetSendInfo(
- SK_AC *pAc,
- void *pIpHeader,
- SKCS_PACKET_INFO *pPacketInfo,
- int NetNumber);
-
extern void SkCsSetReceiveFlags(
SK_AC *pAc,
unsigned ReceiveFlags,
--- linux-2.6.12-rc2-mm3-full/drivers/net/sk98lin/skcsum.c.old 2005-04-19 23:45:09.000000000 +0200
+++ linux-2.6.12-rc2-mm3-full/drivers/net/sk98lin/skcsum.c 2005-04-19 23:46:19.000000000 +0200
@@ -136,258 +136,6 @@
/******************************************************************************
*
- * SkCsGetSendInfo - get checksum information for a send packet
- *
- * Description:
- * Get all checksum information necessary to send a TCP or UDP packet. The
- * function checks the IP header passed to it. If the high-level protocol
- * is either TCP or UDP the pseudo header checksum is calculated and
- * returned.
- *
- * The function returns the total length of the IP header (including any
- * IP option fields), which is the same as the start offset of the IP data
- * which in turn is the start offset of the TCP or UDP header.
- *
- * The function also returns the TCP or UDP pseudo header checksum, which
- * should be used as the start value for the hardware checksum calculation.
- * (Note that any actual pseudo header checksum can never calculate to
- * zero.)
- *
- * Note:
- * There is a bug in the GENESIS ASIC which may lead to wrong checksums.
- *
- * Arguments:
- * pAc - A pointer to the adapter context struct.
- *
- * pIpHeader - Pointer to IP header. Must be at least the IP header *not*
- * including any option fields, i.e. at least 20 bytes.
- *
- * Note: This pointer will be used to address 8-, 16-, and 32-bit
- * variables with the respective alignment offsets relative to the pointer.
- * Thus, the pointer should point to a 32-bit aligned address. If the
- * target system cannot address 32-bit variables on non 32-bit aligned
- * addresses, then the pointer *must* point to a 32-bit aligned address.
- *
- * pPacketInfo - A pointer to the packet information structure for this
- * packet. Before calling this SkCsGetSendInfo(), the following field must
- * be initialized:
- *
- * ProtocolFlags - Initialize with any combination of
- * SKCS_PROTO_XXX bit flags. SkCsGetSendInfo() will only work on
- * the protocols specified here. Any protocol(s) not specified
- * here will be ignored.
- *
- * Note: Only one checksum can be calculated in hardware. Thus, if
- * SKCS_PROTO_IP is specified in the 'ProtocolFlags',
- * SkCsGetSendInfo() must calculate the IP header checksum in
- * software. It might be a better idea to have the calling
- * protocol stack calculate the IP header checksum.
- *
- * Returns: N/A
- * On return, the following fields in 'pPacketInfo' may or may not have
- * been filled with information, depending on the protocol(s) found in the
- * packet:
- *
- * ProtocolFlags - Returns the SKCS_PROTO_XXX bit flags of the protocol(s)
- * that were both requested by the caller and actually found in the packet.
- * Protocol(s) not specified by the caller and/or not found in the packet
- * will have their respective SKCS_PROTO_XXX bit flags reset.
- *
- * Note: For IP fragments, TCP and UDP packet information is ignored.
- *
- * IpHeaderLength - The total length in bytes of the complete IP header
- * including any option fields is returned here. This is the start offset
- * of the IP data, i.e. the TCP or UDP header if present.
- *
- * IpHeaderChecksum - If IP has been specified in the 'ProtocolFlags', the
- * 16-bit Internet Checksum of the IP header is returned here. This value
- * is to be stored into the packet's 'IP Header Checksum' field.
- *
- * PseudoHeaderChecksum - If this is a TCP or UDP packet and if TCP or UDP
- * has been specified in the 'ProtocolFlags', the 16-bit Internet Checksum
- * of the TCP or UDP pseudo header is returned here.
- */
-void SkCsGetSendInfo(
-SK_AC *pAc, /* Adapter context struct. */
-void *pIpHeader, /* IP header. */
-SKCS_PACKET_INFO *pPacketInfo, /* Packet information struct. */
-int NetNumber) /* Net number */
-{
- /* Internet Header Version found in IP header. */
- unsigned InternetHeaderVersion;
-
- /* Length of the IP header as found in IP header. */
- unsigned IpHeaderLength;
-
- /* Bit field specifiying the desired/found protocols. */
- unsigned ProtocolFlags;
-
- /* Next level protocol identifier found in IP header. */
- unsigned NextLevelProtocol;
-
- /* Length of IP data portion. */
- unsigned IpDataLength;
-
- /* TCP/UDP pseudo header checksum. */
- unsigned long PseudoHeaderChecksum;
-
- /* Pointer to next level protocol statistics structure. */
- SKCS_PROTO_STATS *NextLevelProtoStats;
-
- /* Temporary variable. */
- unsigned Tmp;
-
- Tmp = *(SK_U8 *)
- SKCS_IDX(pIpHeader, SKCS_OFS_IP_HEADER_VERSION_AND_LENGTH);
-
- /* Get the Internet Header Version (IHV). */
- /* Note: The IHV is stored in the upper four bits. */
-
- InternetHeaderVersion = Tmp >> 4;
-
- /* Check the Internet Header Version. */
- /* Note: We currently only support IP version 4. */
-
- if (InternetHeaderVersion != 4) { /* IPv4? */
- SK_DBG_MSG(pAc, SK_DBGMOD_CSUM, SK_DBGCAT_ERR | SK_DBGCAT_TX,
- ("Tx: Unknown Internet Header Version %u.\n",
- InternetHeaderVersion));
- pPacketInfo->ProtocolFlags = 0;
- pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_IP].TxUnableCts++;
- return;
- }
-
- /* Get the IP header length (IHL). */
- /*
- * Note: The IHL is stored in the lower four bits as the number of
- * 4-byte words.
- */
-
- IpHeaderLength = (Tmp & 0xf) * 4;
- pPacketInfo->IpHeaderLength = IpHeaderLength;
-
- /* Check the IP header length. */
-
- /* 04-Aug-1998 sw - Really check the IHL? Necessary? */
-
- if (IpHeaderLength < 5*4) {
- SK_DBG_MSG(pAc, SK_DBGMOD_CSUM, SK_DBGCAT_ERR | SK_DBGCAT_TX,
- ("Tx: Invalid IP Header Length %u.\n", IpHeaderLength));
- pPacketInfo->ProtocolFlags = 0;
- pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_IP].TxUnableCts++;
- return;
- }
-
- /* This is an IPv4 frame with a header of valid length. */
-
- pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_IP].TxOkCts++;
-
- /* Check if we should calculate the IP header checksum. */
-
- ProtocolFlags = pPacketInfo->ProtocolFlags;
-
- if (ProtocolFlags & SKCS_PROTO_IP) {
- pPacketInfo->IpHeaderChecksum =
- SkCsCalculateChecksum(pIpHeader, IpHeaderLength);
- }
-
- /* Get the next level protocol identifier. */
-
- NextLevelProtocol =
- *(SK_U8 *) SKCS_IDX(pIpHeader, SKCS_OFS_IP_NEXT_LEVEL_PROTOCOL);
-
- /*
- * Check if this is a TCP or UDP frame and if we should calculate the
- * TCP/UDP pseudo header checksum.
- *
- * Also clear all protocol bit flags of protocols not present in the
- * frame.
- */
-
- if ((ProtocolFlags & SKCS_PROTO_TCP) != 0 &&
- NextLevelProtocol == SKCS_PROTO_ID_TCP) {
- /* TCP/IP frame. */
- ProtocolFlags &= SKCS_PROTO_TCP | SKCS_PROTO_IP;
- NextLevelProtoStats =
- &pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_TCP];
- }
- else if ((ProtocolFlags & SKCS_PROTO_UDP) != 0 &&
- NextLevelProtocol == SKCS_PROTO_ID_UDP) {
- /* UDP/IP frame. */
- ProtocolFlags &= SKCS_PROTO_UDP | SKCS_PROTO_IP;
- NextLevelProtoStats =
- &pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_UDP];
- }
- else {
- /*
- * Either not a TCP or UDP frame and/or TCP/UDP processing not
- * specified.
- */
- pPacketInfo->ProtocolFlags = ProtocolFlags & SKCS_PROTO_IP;
- return;
- }
-
- /* Check if this is an IP fragment. */
-
- /*
- * Note: An IP fragment has a non-zero "Fragment Offset" field and/or
- * the "More Fragments" bit set. Thus, if both the "Fragment Offset"
- * and the "More Fragments" are zero, it is *not* a fragment. We can
- * easily check both at the same time since they are in the same 16-bit
- * word.
- */
-
- if ((*(SK_U16 *)
- SKCS_IDX(pIpHeader, SKCS_OFS_IP_FLAGS_AND_FRAGMENT_OFFSET) &
- ~SKCS_IP_DONT_FRAGMENT) != 0) {
- /* IP fragment; ignore all other protocols. */
- pPacketInfo->ProtocolFlags = ProtocolFlags & SKCS_PROTO_IP;
- NextLevelProtoStats->TxUnableCts++;
- return;
- }
-
- /*
- * Calculate the TCP/UDP pseudo header checksum.
- */
-
- /* Get total length of IP header and data. */
-
- IpDataLength =
- *(SK_U16 *) SKCS_IDX(pIpHeader, SKCS_OFS_IP_TOTAL_LENGTH);
-
- /* Get length of IP data portion. */
-
- IpDataLength = SKCS_NTOH16(IpDataLength) - IpHeaderLength;
-
- /* Calculate the sum of all pseudo header fields (16-bit). */
-
- PseudoHeaderChecksum =
- (unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader,
- SKCS_OFS_IP_SOURCE_ADDRESS + 0) +
- (unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader,
- SKCS_OFS_IP_SOURCE_ADDRESS + 2) +
- (unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader,
- SKCS_OFS_IP_DESTINATION_ADDRESS + 0) +
- (unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader,
- SKCS_OFS_IP_DESTINATION_ADDRESS + 2) +
- (unsigned long) SKCS_HTON16(NextLevelProtocol) +
- (unsigned long) SKCS_HTON16(IpDataLength);
-
- /* Add-in any carries. */
-
- SKCS_OC_ADD(PseudoHeaderChecksum, PseudoHeaderChecksum, 0);
-
- /* Add-in any new carry. */
-
- SKCS_OC_ADD(pPacketInfo->PseudoHeaderChecksum, PseudoHeaderChecksum, 0);
-
- pPacketInfo->ProtocolFlags = ProtocolFlags;
- NextLevelProtoStats->TxOkCts++; /* Success. */
-} /* SkCsGetSendInfo */
-
-
-/******************************************************************************
- *
* SkCsGetReceiveInfo - verify checksum information for a received packet
*
* Description:
--- linux-2.6.12-rc2-mm3-full/drivers/net/sk98lin/h/skgeinit.h.old 2005-04-19 23:46:57.000000000 +0200
+++ linux-2.6.12-rc2-mm3-full/drivers/net/sk98lin/h/skgeinit.h 2005-04-20 00:22:36.000000000 +0200
@@ -464,12 +464,6 @@
/*
* public functions in skgeinit.c
*/
-extern void SkGePollRxD(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port,
- SK_BOOL PollRxD);
-
extern void SkGePollTxD(
SK_AC *pAC,
SK_IOC IoC,
@@ -522,10 +516,6 @@
int Led,
int Mode);
-extern void SkGeInitRamIface(
- SK_AC *pAC,
- SK_IOC IoC);
-
extern int SkGeInitAssignRamToQueues(
SK_AC *pAC,
int ActivePort,
@@ -549,11 +539,6 @@
SK_IOC IoC,
int Port);
-extern void SkMacClearRst(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port);
-
extern void SkXmInitMac(
SK_AC *pAC,
SK_IOC IoC,
@@ -580,11 +565,6 @@
SK_IOC IoC,
int Port);
-extern void SkMacFlushRxFifo(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port);
-
extern void SkMacIrq(
SK_AC *pAC,
SK_IOC IoC,
@@ -601,12 +581,6 @@
int Port,
SK_U16 IStatus);
-extern void SkMacSetRxTxEn(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port,
- int Para);
-
extern int SkMacRxTxEnable(
SK_AC *pAC,
SK_IOC IoC,
@@ -659,16 +633,6 @@
int StartNum,
int StopNum);
-extern void SkXmInitDupMd(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port);
-
-extern void SkXmInitPauseMd(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port);
-
extern void SkXmAutoNegLipaXmac(
SK_AC *pAC,
SK_IOC IoC,
@@ -729,17 +693,6 @@
int Port,
SK_BOOL StartTest);
-extern int SkGmEnterLowPowerMode(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port,
- SK_U8 Mode);
-
-extern int SkGmLeaveLowPowerMode(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port);
-
#ifdef SK_DIAG
extern void SkGePhyRead(
SK_AC *pAC,
@@ -782,7 +735,6 @@
/*
* public functions in skgeinit.c
*/
-extern void SkGePollRxD();
extern void SkGePollTxD();
extern void SkGeYellowLED();
extern int SkGeCfgSync();
@@ -792,7 +744,6 @@
extern void SkGeDeInit();
extern int SkGeInitPort();
extern void SkGeXmitLED();
-extern void SkGeInitRamIface();
extern int SkGeInitAssignRamToQueues();
/*
@@ -801,18 +752,15 @@
extern void SkMacRxTxDisable();
extern void SkMacSoftRst();
extern void SkMacHardRst();
-extern void SkMacClearRst();
extern void SkMacInitPhy();
extern int SkMacRxTxEnable();
extern void SkMacPromiscMode();
extern void SkMacHashing();
extern void SkMacIrqDisable();
extern void SkMacFlushTxFifo();
-extern void SkMacFlushRxFifo();
extern void SkMacIrq();
extern int SkMacAutoNegDone();
extern void SkMacAutoNegLipaPhy();
-extern void SkMacSetRxTxEn();
extern void SkXmInitMac();
extern void SkXmPhyRead();
extern void SkXmPhyWrite();
@@ -820,8 +768,6 @@
extern void SkGmPhyRead();
extern void SkGmPhyWrite();
extern void SkXmClrExactAddr();
-extern void SkXmInitDupMd();
-extern void SkXmInitPauseMd();
extern void SkXmAutoNegLipaXmac();
extern int SkXmUpdateStats();
extern int SkGmUpdateStats();
@@ -832,8 +778,6 @@
extern int SkXmOverflowStatus();
extern int SkGmOverflowStatus();
extern int SkGmCableDiagStatus();
-extern int SkGmEnterLowPowerMode();
-extern int SkGmLeaveLowPowerMode();
#ifdef SK_DIAG
extern void SkGePhyRead();
--- linux-2.6.12-rc2-mm3-full/drivers/net/sk98lin/skgeinit.c.old 2005-04-19 23:47:17.000000000 +0200
+++ linux-2.6.12-rc2-mm3-full/drivers/net/sk98lin/skgeinit.c 2005-04-20 00:20:01.000000000 +0200
@@ -59,34 +59,6 @@
/******************************************************************************
*
- * SkGePollRxD() - Enable / Disable Descriptor Polling of RxD Ring
- *
- * Description:
- * Enable or disable the descriptor polling of the receive descriptor
- * ring (RxD) for port 'Port'.
- * The new configuration is *not* saved over any SkGeStopPort() and
- * SkGeInitPort() calls.
- *
- * Returns:
- * nothing
- */
-void SkGePollRxD(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC, /* IO context */
-int Port, /* Port Index (MAC_1 + n) */
-SK_BOOL PollRxD) /* SK_TRUE (enable pol.), SK_FALSE (disable pol.) */
-{
- SK_GEPORT *pPrt;
-
- pPrt = &pAC->GIni.GP[Port];
-
- SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_CSR), (PollRxD) ?
- CSR_ENA_POL : CSR_DIS_POL);
-} /* SkGePollRxD */
-
-
-/******************************************************************************
- *
* SkGePollTxD() - Enable / Disable Descriptor Polling of TxD Rings
*
* Description:
@@ -952,7 +924,7 @@
* Returns:
* nothing
*/
-void SkGeInitRamIface(
+static void SkGeInitRamIface(
SK_AC *pAC, /* adapter context */
SK_IOC IoC) /* IO context */
{
@@ -1409,83 +1381,6 @@
} /* SkGeInit0*/
-#ifdef SK_PCI_RESET
-
-/******************************************************************************
- *
- * SkGePciReset() - Reset PCI interface
- *
- * Description:
- * o Read PCI configuration.
- * o Change power state to 3.
- * o Change power state to 0.
- * o Restore PCI configuration.
- *
- * Returns:
- * 0: Success.
- * 1: Power state could not be changed to 3.
- */
-static int SkGePciReset(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC) /* IO context */
-{
- int i;
- SK_U16 PmCtlSts;
- SK_U32 Bp1;
- SK_U32 Bp2;
- SK_U16 PciCmd;
- SK_U8 Cls;
- SK_U8 Lat;
- SK_U8 ConfigSpace[PCI_CFG_SIZE];
-
- /*
- * Note: Switching to D3 state is like a software reset.
- * Switching from D3 to D0 is a hardware reset.
- * We have to save and restore the configuration space.
- */
- for (i = 0; i < PCI_CFG_SIZE; i++) {
- SkPciReadCfgDWord(pAC, i*4, &ConfigSpace[i]);
- }
-
- /* We know the RAM Interface Arbiter is enabled. */
- SkPciWriteCfgWord(pAC, PCI_PM_CTL_STS, PCI_PM_STATE_D3);
- SkPciReadCfgWord(pAC, PCI_PM_CTL_STS, &PmCtlSts);
-
- if ((PmCtlSts & PCI_PM_STATE_MSK) != PCI_PM_STATE_D3) {
- return(1);
- }
-
- /* Return to D0 state. */
- SkPciWriteCfgWord(pAC, PCI_PM_CTL_STS, PCI_PM_STATE_D0);
-
- /* Check for D0 state. */
- SkPciReadCfgWord(pAC, PCI_PM_CTL_STS, &PmCtlSts);
-
- if ((PmCtlSts & PCI_PM_STATE_MSK) != PCI_PM_STATE_D0) {
- return(1);
- }
-
- /* Check PCI Config Registers. */
- SkPciReadCfgWord(pAC, PCI_COMMAND, &PciCmd);
- SkPciReadCfgByte(pAC, PCI_CACHE_LSZ, &Cls);
- SkPciReadCfgDWord(pAC, PCI_BASE_1ST, &Bp1);
- SkPciReadCfgDWord(pAC, PCI_BASE_2ND, &Bp2);
- SkPciReadCfgByte(pAC, PCI_LAT_TIM, &Lat);
-
- if (PciCmd != 0 || Cls != (SK_U8)0 || Lat != (SK_U8)0 ||
- (Bp1 & 0xfffffff0L) != 0 || Bp2 != 1) {
- return(1);
- }
-
- /* Restore PCI Config Space. */
- for (i = 0; i < PCI_CFG_SIZE; i++) {
- SkPciWriteCfgDWord(pAC, i*4, ConfigSpace[i]);
- }
-
- return(0);
-} /* SkGePciReset */
-
-#endif /* SK_PCI_RESET */
/******************************************************************************
*
@@ -1524,10 +1419,6 @@
/* save CLK_RUN bits (YUKON-Lite) */
SK_IN16(IoC, B0_CTST, &CtrlStat);
-#ifdef SK_PCI_RESET
- (void)SkGePciReset(pAC, IoC);
-#endif /* SK_PCI_RESET */
-
/* do the SW-reset */
SK_OUT8(IoC, B0_CTST, CS_RST_SET);
@@ -1991,11 +1882,6 @@
int i;
SK_U16 Word;
-#ifdef SK_PHY_LP_MODE
- SK_U8 Byte;
- SK_U16 PmCtlSts;
-#endif /* SK_PHY_LP_MODE */
-
#if (!defined(SK_SLIM) && !defined(VCPU))
/* ensure I2C is ready */
SkI2cWaitIrq(pAC, IoC);
@@ -2010,38 +1896,6 @@
}
}
-#ifdef SK_PHY_LP_MODE
- /*
- * for power saving purposes within mobile environments
- * we set the PHY to coma mode and switch to D3 power state.
- */
- if (pAC->GIni.GIYukonLite &&
- pAC->GIni.GIChipRev == CHIP_REV_YU_LITE_A3) {
-
- /* for all ports switch PHY to coma mode */
- for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
-
- SkGmEnterLowPowerMode(pAC, IoC, i, PHY_PM_DEEP_SLEEP);
- }
-
- if (pAC->GIni.GIVauxAvail) {
- /* switch power to VAUX */
- Byte = PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_ON | PC_VCC_OFF;
-
- SK_OUT8(IoC, B0_POWER_CTRL, Byte);
- }
-
- /* switch to D3 state */
- SK_IN16(IoC, PCI_C(PCI_PM_CTL_STS), &PmCtlSts);
-
- PmCtlSts |= PCI_PM_STATE_D3;
-
- SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON);
-
- SK_OUT16(IoC, PCI_C(PCI_PM_CTL_STS), PmCtlSts);
- }
-#endif /* SK_PHY_LP_MODE */
-
/* Reset all bits in the PCI STATUS register */
/*
* Note: PCI Cfg cycles cannot be used, because they are not
--- linux-2.6.12-rc2-mm3-full/drivers/net/sk98lin/h/skgepnmi.h.old 2005-04-19 23:48:35.000000000 +0200
+++ linux-2.6.12-rc2-mm3-full/drivers/net/sk98lin/h/skgepnmi.h 2005-04-20 00:16:53.000000000 +0200
@@ -946,10 +946,6 @@
* Function prototypes
*/
extern int SkPnmiInit(SK_AC *pAC, SK_IOC IoC, int Level);
-extern int SkPnmiGetVar(SK_AC *pAC, SK_IOC IoC, SK_U32 Id, void* pBuf,
- unsigned int* pLen, SK_U32 Instance, SK_U32 NetIndex);
-extern int SkPnmiPreSetVar(SK_AC *pAC, SK_IOC IoC, SK_U32 Id,
- void* pBuf, unsigned int *pLen, SK_U32 Instance, SK_U32 NetIndex);
extern int SkPnmiSetVar(SK_AC *pAC, SK_IOC IoC, SK_U32 Id, void* pBuf,
unsigned int *pLen, SK_U32 Instance, SK_U32 NetIndex);
extern int SkPnmiGetStruct(SK_AC *pAC, SK_IOC IoC, void* pBuf,
--- linux-2.6.12-rc2-mm3-full/drivers/net/sk98lin/skgepnmi.c.old 2005-04-19 23:48:49.000000000 +0200
+++ linux-2.6.12-rc2-mm3-full/drivers/net/sk98lin/skgepnmi.c 2005-04-20 00:20:49.000000000 +0200
@@ -56,10 +56,6 @@
* Public Function prototypes
*/
int SkPnmiInit(SK_AC *pAC, SK_IOC IoC, int level);
-int SkPnmiGetVar(SK_AC *pAC, SK_IOC IoC, SK_U32 Id, void *pBuf,
- unsigned int *pLen, SK_U32 Instance, SK_U32 NetIndex);
-int SkPnmiPreSetVar(SK_AC *pAC, SK_IOC IoC, SK_U32 Id, void *pBuf,
- unsigned int *pLen, SK_U32 Instance, SK_U32 NetIndex);
int SkPnmiSetVar(SK_AC *pAC, SK_IOC IoC, SK_U32 Id, void *pBuf,
unsigned int *pLen, SK_U32 Instance, SK_U32 NetIndex);
int SkPnmiGetStruct(SK_AC *pAC, SK_IOC IoC, void *pBuf,
@@ -587,7 +583,7 @@
* exist (e.g. port instance 3 on a two port
* adapter.
*/
-int SkPnmiGetVar(
+static int SkPnmiGetVar(
SK_AC *pAC, /* Pointer to adapter context */
SK_IOC IoC, /* IO context handle */
SK_U32 Id, /* Object ID that is to be processed */
@@ -629,7 +625,7 @@
* exist (e.g. port instance 3 on a two port
* adapter.
*/
-int SkPnmiPreSetVar(
+static int SkPnmiPreSetVar(
SK_AC *pAC, /* Pointer to adapter context */
SK_IOC IoC, /* IO context handle */
SK_U32 Id, /* Object ID that is to be processed */
@@ -5062,9 +5058,6 @@
case OID_SKGE_SPEED_CAP:
case OID_SKGE_SPEED_MODE:
case OID_SKGE_SPEED_STATUS:
-#ifdef SK_PHY_LP_MODE
- case OID_SKGE_PHY_LP_MODE:
-#endif
if (*pLen < (Limit - LogPortIndex) * sizeof(SK_U8)) {
*pLen = (Limit - LogPortIndex) * sizeof(SK_U8);
@@ -5140,28 +5133,6 @@
Offset += sizeof(SK_U32);
break;
-#ifdef SK_PHY_LP_MODE
- case OID_SKGE_PHY_LP_MODE:
- if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
- if (LogPortIndex == 0) {
- continue;
- }
- else {
- /* Get value for physical ports */
- PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(pAC, LogPortIndex);
- Val8 = (SK_U8) pAC->GIni.GP[PhysPortIndex].PPhyPowerState;
- *pBufPtr = Val8;
- }
- }
- else { /* DualNetMode */
-
- Val8 = (SK_U8) pAC->GIni.GP[PhysPortIndex].PPhyPowerState;
- *pBufPtr = Val8;
- }
- Offset += sizeof(SK_U8);
- break;
-#endif
-
case OID_SKGE_LINK_CAP:
if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
if (LogPortIndex == 0) {
@@ -5478,16 +5449,6 @@
}
break;
-#ifdef SK_PHY_LP_MODE
- case OID_SKGE_PHY_LP_MODE:
- if (*pLen < Limit - LogPortIndex) {
-
- *pLen = Limit - LogPortIndex;
- return (SK_PNMI_ERR_TOO_SHORT);
- }
- break;
-#endif
-
case OID_SKGE_MTU:
if (*pLen < sizeof(SK_U32)) {
@@ -5845,116 +5806,6 @@
Offset += sizeof(SK_U32);
break;
-#ifdef SK_PHY_LP_MODE
- case OID_SKGE_PHY_LP_MODE:
- /* The preset ends here */
- if (Action == SK_PNMI_PRESET) {
-
- return (SK_PNMI_ERR_OK);
- }
-
- if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
- if (LogPortIndex == 0) {
- Offset = 0;
- continue;
- }
- else {
- /* Set value for physical ports */
- PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(pAC, LogPortIndex);
-
- switch (*(pBuf + Offset)) {
- case 0:
- /* If LowPowerMode is active, we can leave it. */
- if (pAC->GIni.GP[PhysPortIndex].PPhyPowerState) {
-
- Val32 = SkGmLeaveLowPowerMode(pAC, IoC, PhysPortIndex);
-
- if (pAC->GIni.GP[PhysPortIndex].PPhyPowerState < 3) {
-
- SkDrvInitAdapter(pAC);
- }
- break;
- }
- else {
- *pLen = 0;
- return (SK_PNMI_ERR_GENERAL);
- }
- case 1:
- case 2:
- case 3:
- case 4:
- /* If no LowPowerMode is active, we can enter it. */
- if (!pAC->GIni.GP[PhysPortIndex].PPhyPowerState) {
-
- if ((*(pBuf + Offset)) < 3) {
-
- SkDrvDeInitAdapter(pAC);
- }
-
- Val32 = SkGmEnterLowPowerMode(pAC, IoC, PhysPortIndex, *pBuf);
- break;
- }
- else {
- *pLen = 0;
- return (SK_PNMI_ERR_GENERAL);
- }
- default:
- *pLen = 0;
- return (SK_PNMI_ERR_BAD_VALUE);
- }
- }
- }
- else { /* DualNetMode */
-
- switch (*(pBuf + Offset)) {
- case 0:
- /* If we are in a LowPowerMode, we can leave it. */
- if (pAC->GIni.GP[PhysPortIndex].PPhyPowerState) {
-
- Val32 = SkGmLeaveLowPowerMode(pAC, IoC, PhysPortIndex);
-
- if (pAC->GIni.GP[PhysPortIndex].PPhyPowerState < 3) {
-
- SkDrvInitAdapter(pAC);
- }
- break;
- }
- else {
- *pLen = 0;
- return (SK_PNMI_ERR_GENERAL);
- }
-
- case 1:
- case 2:
- case 3:
- case 4:
- /* If we are not already in LowPowerMode, we can enter it. */
- if (!pAC->GIni.GP[PhysPortIndex].PPhyPowerState) {
-
- if ((*(pBuf + Offset)) < 3) {
-
- SkDrvDeInitAdapter(pAC);
- }
- else {
-
- Val32 = SkGmEnterLowPowerMode(pAC, IoC, PhysPortIndex, *pBuf);
- }
- break;
- }
- else {
- *pLen = 0;
- return (SK_PNMI_ERR_GENERAL);
- }
-
- default:
- *pLen = 0;
- return (SK_PNMI_ERR_BAD_VALUE);
- }
- }
- Offset += sizeof(SK_U8);
- break;
-#endif
-
default:
SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_ERR,
("MacPrivateConf: Unknown OID should be handled before set"));
--- linux-2.6.12-rc2-mm3-full/drivers/net/sk98lin/h/skgesirq.h.old 2005-04-19 23:49:20.000000000 +0200
+++ linux-2.6.12-rc2-mm3-full/drivers/net/sk98lin/h/skgesirq.h 2005-04-19 23:49:26.000000000 +0200
@@ -105,7 +105,6 @@
extern void SkGeSirqIsr(SK_AC *pAC, SK_IOC IoC, SK_U32 Istatus);
extern int SkGeSirqEvent(SK_AC *pAC, SK_IOC IoC, SK_U32 Event, SK_EVPARA Para);
-extern void SkHWLinkUp(SK_AC *pAC, SK_IOC IoC, int Port);
extern void SkHWLinkDown(SK_AC *pAC, SK_IOC IoC, int Port);
#endif /* _INC_SKGESIRQ_H_ */
--- linux-2.6.12-rc2-mm3-full/drivers/net/sk98lin/skgesirq.c.old 2005-04-19 23:49:36.000000000 +0200
+++ linux-2.6.12-rc2-mm3-full/drivers/net/sk98lin/skgesirq.c 2005-04-20 00:16:42.000000000 +0200
@@ -265,7 +265,7 @@
*
* Returns: N/A
*/
-void SkHWLinkUp(
+static void SkHWLinkUp(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port) /* Port Index (MAC_1 + n) */
@@ -612,14 +612,6 @@
* we ignore those
*/
pPrt->HalfDupTimerActive = SK_TRUE;
-#ifdef XXX
- Len = sizeof(SK_U64);
- SkPnmiGetVar(pAC, IoC, OID_SKGE_STAT_TX_OCTETS, (char *)&Octets,
- &Len, (SK_U32)SK_PNMI_PORT_PHYS2INST(pAC, 0),
- pAC->Rlmt.Port[0].Net->NetNumber);
-
- pPrt->LastOctets = Octets;
-#endif /* XXX */
/* Snap statistic counters */
(void)SkXmUpdateStats(pAC, IoC, 0);
@@ -653,14 +645,6 @@
pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOHALF) &&
!pPrt->HalfDupTimerActive) {
pPrt->HalfDupTimerActive = SK_TRUE;
-#ifdef XXX
- Len = sizeof(SK_U64);
- SkPnmiGetVar(pAC, IoC, OID_SKGE_STAT_TX_OCTETS, (char *)&Octets,
- &Len, (SK_U32)SK_PNMI_PORT_PHYS2INST(pAC, 1),
- pAC->Rlmt.Port[1].Net->NetNumber);
-
- pPrt->LastOctets = Octets;
-#endif /* XXX */
/* Snap statistic counters */
(void)SkXmUpdateStats(pAC, IoC, 1);
@@ -2085,12 +2069,6 @@
pPrt->HalfDupTimerActive = SK_FALSE;
if (pPrt->PLinkModeStatus == SK_LMODE_STAT_HALF ||
pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOHALF) {
-#ifdef XXX
- Len = sizeof(SK_U64);
- SkPnmiGetVar(pAC, IoC, OID_SKGE_STAT_TX_OCTETS, (char *)&Octets,
- &Len, (SK_U32)SK_PNMI_PORT_PHYS2INST(pAC, Port),
- pAC->Rlmt.Port[Port].Net->NetNumber);
-#endif /* XXX */
/* Snap statistic counters */
(void)SkXmUpdateStats(pAC, IoC, Port);
--- linux-2.6.12-rc2-mm3-full/drivers/net/sk98lin/h/ski2c.h.old 2005-04-19 23:49:57.000000000 +0200
+++ linux-2.6.12-rc2-mm3-full/drivers/net/sk98lin/h/ski2c.h 2005-04-19 23:50:39.000000000 +0200
@@ -162,9 +162,6 @@
} SK_I2C;
extern int SkI2cInit(SK_AC *pAC, SK_IOC IoC, int Level);
-extern int SkI2cWrite(SK_AC *pAC, SK_IOC IoC, SK_U32 Data, int Dev, int Size,
- int Reg, int Burst);
-extern int SkI2cReadSensor(SK_AC *pAC, SK_IOC IoC, SK_SENSOR *pSen);
#ifdef SK_DIAG
extern SK_U32 SkI2cRead(SK_AC *pAC, SK_IOC IoC, int Dev, int Size, int Reg,
int Burst);
--- linux-2.6.12-rc2-mm3-full/drivers/net/sk98lin/ski2c.c.old 2005-04-19 23:50:12.000000000 +0200
+++ linux-2.6.12-rc2-mm3-full/drivers/net/sk98lin/ski2c.c 2005-04-20 00:19:10.000000000 +0200
@@ -396,7 +396,7 @@
* 1: error, transfer does not complete, I2C transfer
* killed, wait loop terminated.
*/
-int SkI2cWait(
+static int SkI2cWait(
SK_AC *pAC, /* Adapter Context */
SK_IOC IoC, /* I/O Context */
int Event) /* complete event to wait for (I2C_READ or I2C_WRITE) */
@@ -481,7 +481,7 @@
* returns 0: success
* 1: error
*/
-int SkI2cWrite(
+static int SkI2cWrite(
SK_AC *pAC, /* Adapter Context */
SK_IOC IoC, /* I/O Context */
SK_U32 I2cData, /* I2C Data to write */
@@ -538,7 +538,7 @@
* 1 if the read is completed
* 0 if the read must be continued (I2C Bus still allocated)
*/
-int SkI2cReadSensor(
+static int SkI2cReadSensor(
SK_AC *pAC, /* Adapter Context */
SK_IOC IoC, /* I/O Context */
SK_SENSOR *pSen) /* Sensor to be read */
--- linux-2.6.12-rc2-mm3-full/drivers/net/sk98lin/skrlmt.c.old 2005-04-19 23:50:57.000000000 +0200
+++ linux-2.6.12-rc2-mm3-full/drivers/net/sk98lin/skrlmt.c 2005-04-19 23:51:05.000000000 +0200
@@ -282,7 +282,6 @@
SK_MAC_ADDR SkRlmtMcAddr = {{0x01, 0x00, 0x5A, 0x52, 0x4C, 0x4D}};
SK_MAC_ADDR BridgeMcAddr = {{0x01, 0x80, 0xC2, 0x00, 0x00, 0x00}};
-SK_MAC_ADDR BcAddr = {{0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}};
/* local variables ************************************************************/
--- linux-2.6.12-rc2-mm3-full/drivers/net/sk98lin/h/skvpd.h.old 2005-04-19 23:51:20.000000000 +0200
+++ linux-2.6.12-rc2-mm3-full/drivers/net/sk98lin/h/skvpd.h 2005-04-20 00:28:16.000000000 +0200
@@ -191,14 +191,6 @@
int addr);
#endif /* SKDIAG */
-extern int VpdSetupPara(
- SK_AC *pAC,
- const char *key,
- const char *buf,
- int len,
- int type,
- int op);
-
extern SK_VPD_STATUS *VpdStat(
SK_AC *pAC,
SK_IOC IoC);
@@ -235,11 +227,6 @@
SK_AC *pAC,
SK_IOC IoC);
-extern void VpdErrLog(
- SK_AC *pAC,
- SK_IOC IoC,
- char *msg);
-
#ifdef SKDIAG
extern int VpdReadBlock(
SK_AC *pAC,
@@ -257,7 +244,6 @@
#endif /* SKDIAG */
#else /* SK_KR_PROTO */
extern SK_U32 VpdReadDWord();
-extern int VpdSetupPara();
extern SK_VPD_STATUS *VpdStat();
extern int VpdKeys();
extern int VpdRead();
@@ -265,7 +251,6 @@
extern int VpdWrite();
extern int VpdDelete();
extern int VpdUpdate();
-extern void VpdErrLog();
#endif /* SK_KR_PROTO */
#endif /* __INC_SKVPD_H_ */
--- linux-2.6.12-rc2-mm3-full/drivers/net/sk98lin/skvpd.c.old 2005-04-19 23:51:35.000000000 +0200
+++ linux-2.6.12-rc2-mm3-full/drivers/net/sk98lin/skvpd.c 2005-04-20 00:11:20.000000000 +0200
@@ -132,65 +132,6 @@
#endif /* SKDIAG */
-#if 0
-
-/*
- Write the dword 'data' at address 'addr' into the VPD EEPROM, and
- verify that the data is written.
-
- Needed Time:
-
-. MIN MAX
-. -------------------------------------------------------------------
-. write 1.8 ms 3.6 ms
-. internal write cyles 0.7 ms 7.0 ms
-. -------------------------------------------------------------------
-. over all program time 2.5 ms 10.6 ms
-. read 1.3 ms 2.6 ms
-. -------------------------------------------------------------------
-. over all 3.8 ms 13.2 ms
-.
-
-
- Returns 0: success
- 1: error, I2C transfer does not terminate
- 2: error, data verify error
-
- */
-static int VpdWriteDWord(
-SK_AC *pAC, /* pAC pointer */
-SK_IOC IoC, /* IO Context */
-int addr, /* VPD address */
-SK_U32 data) /* VPD data to write */
-{
- /* start VPD write */
- /* Don't swap here, it's a data stream of bytes */
- SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
- ("VPD write dword at addr 0x%x, data = 0x%x\n",addr,data));
- VPD_OUT32(pAC, IoC, PCI_VPD_DAT_REG, (SK_U32)data);
- /* But do it here */
- addr |= VPD_WRITE;
-
- VPD_OUT16(pAC, IoC, PCI_VPD_ADR_REG, (SK_U16)(addr | VPD_WRITE));
-
- /* this may take up to 10,6 ms */
- if (VpdWait(pAC, IoC, VPD_WRITE)) {
- SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
- ("Write Timed Out\n"));
- return(1);
- };
-
- /* verify data */
- if (VpdReadDWord(pAC, IoC, addr) != data) {
- SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL,
- ("Data Verify Error\n"));
- return(2);
- }
- return(0);
-} /* VpdWriteDWord */
-
-#endif /* 0 */
-
/*
* Read one Stream of 'len' bytes of VPD data, starting at 'addr' from
* or to the I2C EEPROM.
@@ -728,7 +669,7 @@
* 6: fatal VPD error
*
*/
-int VpdSetupPara(
+static int VpdSetupPara(
SK_AC *pAC, /* common data base */
const char *key, /* keyword to insert */
const char *buf, /* buffer with the keyword value */
@@ -1148,50 +1089,3 @@
return(0);
}
-
-
-/*
- * Read the contents of the VPD EEPROM and copy it to the VPD buffer
- * if not already done. If the keyword "VF" is not present it will be
- * created and the error log message will be stored to this keyword.
- * If "VF" is not present the error log message will be stored to the
- * keyword "VL". "VL" will created or overwritten if "VF" is present.
- * The VPD read/write area is saved to the VPD EEPROM.
- *
- * returns nothing, errors will be ignored.
- */
-void VpdErrLog(
-SK_AC *pAC, /* common data base */
-SK_IOC IoC, /* IO Context */
-char *msg) /* error log message */
-{
- SK_VPD_PARA *v, vf; /* VF */
- int len;
-
- SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_TX,
- ("VPD error log msg %s\n", msg));
- if ((pAC->vpd.v.vpd_status & VPD_VALID) == 0) {
- if (VpdInit(pAC, IoC) != 0) {
- SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
- ("VPD init error\n"));
- return;
- }
- }
-
- len = strlen(msg);
- if (len > VPD_MAX_LEN) {
- /* cut it */
- len = VPD_MAX_LEN;
- }
- if ((v = vpd_find_para(pAC, VPD_VF, &vf)) != NULL) {
- SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_TX, ("overwrite VL\n"));
- (void)VpdSetupPara(pAC, VPD_VL, msg, len, VPD_RW_KEY, OWR_KEY);
- }
- else {
- SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_TX, ("write VF\n"));
- (void)VpdSetupPara(pAC, VPD_VF, msg, len, VPD_RW_KEY, ADD_KEY);
- }
-
- (void)VpdUpdate(pAC, IoC);
-}
-
--- linux-2.6.12-rc2-mm3-full/drivers/net/sk98lin/skxmac2.c.old 2005-04-19 23:52:29.000000000 +0200
+++ linux-2.6.12-rc2-mm3-full/drivers/net/sk98lin/skxmac2.c 2005-04-20 00:25:17.000000000 +0200
@@ -41,13 +41,13 @@
#endif
#ifdef GENESIS
-BCOM_HACK BcomRegA1Hack[] = {
+static BCOM_HACK BcomRegA1Hack[] = {
{ 0x18, 0x0c20 }, { 0x17, 0x0012 }, { 0x15, 0x1104 }, { 0x17, 0x0013 },
{ 0x15, 0x0404 }, { 0x17, 0x8006 }, { 0x15, 0x0132 }, { 0x17, 0x8006 },
{ 0x15, 0x0232 }, { 0x17, 0x800D }, { 0x15, 0x000F }, { 0x18, 0x0420 },
{ 0, 0 }
};
-BCOM_HACK BcomRegC0Hack[] = {
+static BCOM_HACK BcomRegC0Hack[] = {
{ 0x18, 0x0c20 }, { 0x17, 0x0012 }, { 0x15, 0x1204 }, { 0x17, 0x0013 },
{ 0x15, 0x0A04 }, { 0x18, 0x0420 },
{ 0, 0 }
@@ -790,7 +790,7 @@
* Returns:
* nothing
*/
-void SkMacFlushRxFifo(
+static void SkMacFlushRxFifo(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port) /* Port Index (MAC_1 + n) */
@@ -1231,38 +1231,6 @@
} /* SkMacHardRst */
-/******************************************************************************
- *
- * SkMacClearRst() - Clear the MAC reset
- *
- * Description: calls a clear MAC reset routine dep. on board type
- *
- * Returns:
- * nothing
- */
-void SkMacClearRst(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC, /* IO context */
-int Port) /* Port Index (MAC_1 + n) */
-{
-
-#ifdef GENESIS
- if (pAC->GIni.GIGenesis) {
-
- SkXmClearRst(pAC, IoC, Port);
- }
-#endif /* GENESIS */
-
-#ifdef YUKON
- if (pAC->GIni.GIYukon) {
-
- SkGmClearRst(pAC, IoC, Port);
- }
-#endif /* YUKON */
-
-} /* SkMacClearRst */
-
-
#ifdef GENESIS
/******************************************************************************
*
@@ -1713,7 +1681,7 @@
* Returns:
* nothing
*/
-void SkXmInitDupMd(
+static void SkXmInitDupMd(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port) /* Port Index (MAC_1 + n) */
@@ -1761,7 +1729,7 @@
* Returns:
* nothing
*/
-void SkXmInitPauseMd(
+static void SkXmInitPauseMd(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port) /* Port Index (MAC_1 + n) */
@@ -2076,283 +2044,7 @@
} /* SkXmInitPhyBcom */
#endif /* GENESIS */
-
#ifdef YUKON
-#ifndef SK_SLIM
-/******************************************************************************
- *
- * SkGmEnterLowPowerMode()
- *
- * Description:
- * This function sets the Marvell Alaska PHY to the low power mode
- * given by parameter mode.
- * The following low power modes are available:
- *
- * - Coma Mode (Deep Sleep):
- * Power consumption: ~15 - 30 mW
- * The PHY cannot wake up on its own.
- *
- * - IEEE 22.2.4.1.5 compatible power down mode
- * Power consumption: ~240 mW
- * The PHY cannot wake up on its own.
- *
- * - energy detect mode
- * Power consumption: ~160 mW
- * The PHY can wake up on its own by detecting activity
- * on the CAT 5 cable.
- *
- * - energy detect plus mode
- * Power consumption: ~150 mW
- * The PHY can wake up on its own by detecting activity
- * on the CAT 5 cable.
- * Connected devices can be woken up by sending normal link
- * pulses every one second.
- *
- * Note:
- *
- * Returns:
- * 0: ok
- * 1: error
- */
-int SkGmEnterLowPowerMode(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC, /* IO context */
-int Port, /* Port Index (e.g. MAC_1) */
-SK_U8 Mode) /* low power mode */
-{
- SK_U16 Word;
- SK_U32 DWord;
- SK_U8 LastMode;
- int Ret = 0;
-
- if (pAC->GIni.GIYukonLite &&
- pAC->GIni.GIChipRev == CHIP_REV_YU_LITE_A3) {
-
- /* save current power mode */
- LastMode = pAC->GIni.GP[Port].PPhyPowerState;
- pAC->GIni.GP[Port].PPhyPowerState = Mode;
-
- switch (Mode) {
- /* coma mode (deep sleep) */
- case PHY_PM_DEEP_SLEEP:
- /* setup General Purpose Control Register */
- GM_OUT16(IoC, 0, GM_GP_CTRL, GM_GPCR_FL_PASS |
- GM_GPCR_SPEED_100 | GM_GPCR_AU_ALL_DIS);
-
- /* apply COMA mode workaround */
- SkGmPhyWrite(pAC, IoC, Port, 29, 0x001f);
- SkGmPhyWrite(pAC, IoC, Port, 30, 0xfff3);
-
- SK_IN32(IoC, PCI_C(PCI_OUR_REG_1), &DWord);
-
- SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON);
-
- /* Set PHY to Coma Mode */
- SK_OUT32(IoC, PCI_C(PCI_OUR_REG_1), DWord | PCI_PHY_COMA);
-
- SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
-
- break;
-
- /* IEEE 22.2.4.1.5 compatible power down mode */
- case PHY_PM_IEEE_POWER_DOWN:
- /*
- * - disable MAC 125 MHz clock
- * - allow MAC power down
- */
- SkGmPhyRead(pAC, IoC, Port, PHY_MARV_PHY_CTRL, &Word);
- Word |= PHY_M_PC_DIS_125CLK;
- Word &= ~PHY_M_PC_MAC_POW_UP;
- SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_PHY_CTRL, Word);
-
- /*
- * register changes must be followed by a software
- * reset to take effect
- */
- SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CTRL, &Word);
- Word |= PHY_CT_RESET;
- SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_CTRL, Word);
-
- /* switch IEEE compatible power down mode on */
- SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CTRL, &Word);
- Word |= PHY_CT_PDOWN;
- SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_CTRL, Word);
- break;
-
- /* energy detect and energy detect plus mode */
- case PHY_PM_ENERGY_DETECT:
- case PHY_PM_ENERGY_DETECT_PLUS:
- /*
- * - disable MAC 125 MHz clock
- */
- SkGmPhyRead(pAC, IoC, Port, PHY_MARV_PHY_CTRL, &Word);
- Word |= PHY_M_PC_DIS_125CLK;
- SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_PHY_CTRL, Word);
-
- /* activate energy detect mode 1 */
- SkGmPhyRead(pAC, IoC, Port, PHY_MARV_PHY_CTRL, &Word);
-
- /* energy detect mode */
- if (Mode == PHY_PM_ENERGY_DETECT) {
- Word |= PHY_M_PC_EN_DET;
- }
- /* energy detect plus mode */
- else {
- Word |= PHY_M_PC_EN_DET_PLUS;
- }
-
- SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_PHY_CTRL, Word);
-
- /*
- * reinitialize the PHY to force a software reset
- * which is necessary after the register settings
- * for the energy detect modes.
- * Furthermore reinitialisation prevents that the
- * PHY is running out of a stable state.
- */
- SkGmInitPhyMarv(pAC, IoC, Port, SK_FALSE);
- break;
-
- /* don't change current power mode */
- default:
- pAC->GIni.GP[Port].PPhyPowerState = LastMode;
- Ret = 1;
- break;
- }
- }
- /* low power modes are not supported by this chip */
- else {
- Ret = 1;
- }
-
- return(Ret);
-
-} /* SkGmEnterLowPowerMode */
-
-/******************************************************************************
- *
- * SkGmLeaveLowPowerMode()
- *
- * Description:
- * Leave the current low power mode and switch to normal mode
- *
- * Note:
- *
- * Returns:
- * 0: ok
- * 1: error
- */
-int SkGmLeaveLowPowerMode(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC, /* IO context */
-int Port) /* Port Index (e.g. MAC_1) */
-{
- SK_U32 DWord;
- SK_U16 Word;
- SK_U8 LastMode;
- int Ret = 0;
-
- if (pAC->GIni.GIYukonLite &&
- pAC->GIni.GIChipRev == CHIP_REV_YU_LITE_A3) {
-
- /* save current power mode */
- LastMode = pAC->GIni.GP[Port].PPhyPowerState;
- pAC->GIni.GP[Port].PPhyPowerState = PHY_PM_OPERATIONAL_MODE;
-
- switch (LastMode) {
- /* coma mode (deep sleep) */
- case PHY_PM_DEEP_SLEEP:
- SK_IN32(IoC, PCI_C(PCI_OUR_REG_1), &DWord);
-
- SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON);
-
- /* Release PHY from Coma Mode */
- SK_OUT32(IoC, PCI_C(PCI_OUR_REG_1), DWord & ~PCI_PHY_COMA);
-
- SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
-
- SK_IN32(IoC, B2_GP_IO, &DWord);
-
- /* set to output */
- DWord |= (GP_DIR_9 | GP_IO_9);
-
- /* set PHY reset */
- SK_OUT32(IoC, B2_GP_IO, DWord);
-
- DWord &= ~GP_IO_9; /* clear PHY reset (active high) */
-
- /* clear PHY reset */
- SK_OUT32(IoC, B2_GP_IO, DWord);
- break;
-
- /* IEEE 22.2.4.1.5 compatible power down mode */
- case PHY_PM_IEEE_POWER_DOWN:
- /*
- * - enable MAC 125 MHz clock
- * - set MAC power up
- */
- SkGmPhyRead(pAC, IoC, Port, PHY_MARV_PHY_CTRL, &Word);
- Word &= ~PHY_M_PC_DIS_125CLK;
- Word |= PHY_M_PC_MAC_POW_UP;
- SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_PHY_CTRL, Word);
-
- /*
- * register changes must be followed by a software
- * reset to take effect
- */
- SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CTRL, &Word);
- Word |= PHY_CT_RESET;
- SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_CTRL, Word);
-
- /* switch IEEE compatible power down mode off */
- SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CTRL, &Word);
- Word &= ~PHY_CT_PDOWN;
- SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_CTRL, Word);
- break;
-
- /* energy detect and energy detect plus mode */
- case PHY_PM_ENERGY_DETECT:
- case PHY_PM_ENERGY_DETECT_PLUS:
- /*
- * - enable MAC 125 MHz clock
- */
- SkGmPhyRead(pAC, IoC, Port, PHY_MARV_PHY_CTRL, &Word);
- Word &= ~PHY_M_PC_DIS_125CLK;
- SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_PHY_CTRL, Word);
-
- /* disable energy detect mode */
- SkGmPhyRead(pAC, IoC, Port, PHY_MARV_PHY_CTRL, &Word);
- Word &= ~PHY_M_PC_EN_DET_MSK;
- SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_PHY_CTRL, Word);
-
- /*
- * reinitialize the PHY to force a software reset
- * which is necessary after the register settings
- * for the energy detect modes.
- * Furthermore reinitialisation prevents that the
- * PHY is running out of a stable state.
- */
- SkGmInitPhyMarv(pAC, IoC, Port, SK_FALSE);
- break;
-
- /* don't change current power mode */
- default:
- pAC->GIni.GP[Port].PPhyPowerState = LastMode;
- Ret = 1;
- break;
- }
- }
- /* low power modes are not supported by this chip */
- else {
- Ret = 1;
- }
-
- return(Ret);
-
-} /* SkGmLeaveLowPowerMode */
-#endif /* !SK_SLIM */
-
-
/******************************************************************************
*
* SkGmInitPhyMarv() - Initialize the Marvell Phy registers
@@ -3420,145 +3112,6 @@
} /* SkMacAutoNegDone */
-#ifdef GENESIS
-/******************************************************************************
- *
- * SkXmSetRxTxEn() - Special Set Rx/Tx Enable and some features in XMAC
- *
- * Description:
- * sets MAC or PHY LoopBack and Duplex Mode in the MMU Command Reg.
- * enables Rx/Tx
- *
- * Returns: N/A
- */
-static void SkXmSetRxTxEn(
-SK_AC *pAC, /* Adapter Context */
-SK_IOC IoC, /* IO context */
-int Port, /* Port Index (MAC_1 + n) */
-int Para) /* Parameter to set: MAC or PHY LoopBack, Duplex Mode */
-{
- SK_U16 Word;
-
- XM_IN16(IoC, Port, XM_MMU_CMD, &Word);
-
- switch (Para & (SK_MAC_LOOPB_ON | SK_MAC_LOOPB_OFF)) {
- case SK_MAC_LOOPB_ON:
- Word |= XM_MMU_MAC_LB;
- break;
- case SK_MAC_LOOPB_OFF:
- Word &= ~XM_MMU_MAC_LB;
- break;
- }
-
- switch (Para & (SK_PHY_LOOPB_ON | SK_PHY_LOOPB_OFF)) {
- case SK_PHY_LOOPB_ON:
- Word |= XM_MMU_GMII_LOOP;
- break;
- case SK_PHY_LOOPB_OFF:
- Word &= ~XM_MMU_GMII_LOOP;
- break;
- }
-
- switch (Para & (SK_PHY_FULLD_ON | SK_PHY_FULLD_OFF)) {
- case SK_PHY_FULLD_ON:
- Word |= XM_MMU_GMII_FD;
- break;
- case SK_PHY_FULLD_OFF:
- Word &= ~XM_MMU_GMII_FD;
- break;
- }
-
- XM_OUT16(IoC, Port, XM_MMU_CMD, Word | XM_MMU_ENA_RX | XM_MMU_ENA_TX);
-
- /* dummy read to ensure writing */
- XM_IN16(IoC, Port, XM_MMU_CMD, &Word);
-
-} /* SkXmSetRxTxEn */
-#endif /* GENESIS */
-
-
-#ifdef YUKON
-/******************************************************************************
- *
- * SkGmSetRxTxEn() - Special Set Rx/Tx Enable and some features in GMAC
- *
- * Description:
- * sets MAC LoopBack and Duplex Mode in the General Purpose Control Reg.
- * enables Rx/Tx
- *
- * Returns: N/A
- */
-static void SkGmSetRxTxEn(
-SK_AC *pAC, /* Adapter Context */
-SK_IOC IoC, /* IO context */
-int Port, /* Port Index (MAC_1 + n) */
-int Para) /* Parameter to set: MAC LoopBack, Duplex Mode */
-{
- SK_U16 Ctrl;
-
- GM_IN16(IoC, Port, GM_GP_CTRL, &Ctrl);
-
- switch (Para & (SK_MAC_LOOPB_ON | SK_MAC_LOOPB_OFF)) {
- case SK_MAC_LOOPB_ON:
- Ctrl |= GM_GPCR_LOOP_ENA;
- break;
- case SK_MAC_LOOPB_OFF:
- Ctrl &= ~GM_GPCR_LOOP_ENA;
- break;
- }
-
- switch (Para & (SK_PHY_FULLD_ON | SK_PHY_FULLD_OFF)) {
- case SK_PHY_FULLD_ON:
- Ctrl |= GM_GPCR_DUP_FULL;
- break;
- case SK_PHY_FULLD_OFF:
- Ctrl &= ~GM_GPCR_DUP_FULL;
- break;
- }
-
- GM_OUT16(IoC, Port, GM_GP_CTRL, (SK_U16)(Ctrl | GM_GPCR_RX_ENA |
- GM_GPCR_TX_ENA));
-
- /* dummy read to ensure writing */
- GM_IN16(IoC, Port, GM_GP_CTRL, &Ctrl);
-
-} /* SkGmSetRxTxEn */
-#endif /* YUKON */
-
-
-#ifndef SK_SLIM
-/******************************************************************************
- *
- * SkMacSetRxTxEn() - Special Set Rx/Tx Enable and parameters
- *
- * Description: calls the Special Set Rx/Tx Enable routines dep. on board type
- *
- * Returns: N/A
- */
-void SkMacSetRxTxEn(
-SK_AC *pAC, /* Adapter Context */
-SK_IOC IoC, /* IO context */
-int Port, /* Port Index (MAC_1 + n) */
-int Para)
-{
-#ifdef GENESIS
- if (pAC->GIni.GIGenesis) {
-
- SkXmSetRxTxEn(pAC, IoC, Port, Para);
- }
-#endif /* GENESIS */
-
-#ifdef YUKON
- if (pAC->GIni.GIYukon) {
-
- SkGmSetRxTxEn(pAC, IoC, Port, Para);
- }
-#endif /* YUKON */
-
-} /* SkMacSetRxTxEn */
-#endif /* !SK_SLIM */
-
-
/******************************************************************************
*
* SkMacRxTxEnable() - Enable Rx/Tx activity if port is up
@@ -3976,7 +3529,7 @@
* Returns:
* nothing
*/
-void SkXmIrq(
+static void SkXmIrq(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port) /* Port Index (MAC_1 + n) */
@@ -4112,7 +3665,7 @@
* Returns:
* nothing
*/
-void SkGmIrq(
+static void SkGmIrq(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
int Port) /* Port Index (MAC_1 + n) */
--- linux-2.6.12-rc2-mm3-full/drivers/net/sk98lin/h/skdrv2nd.h.old 2005-04-20 00:12:04.000000000 +0200
+++ linux-2.6.12-rc2-mm3-full/drivers/net/sk98lin/h/skdrv2nd.h 2005-04-20 00:12:10.000000000 +0200
@@ -60,7 +60,6 @@
extern int SkPciReadCfgDWord(SK_AC*, int, SK_U32*);
extern int SkPciReadCfgWord(SK_AC*, int, SK_U16*);
extern int SkPciReadCfgByte(SK_AC*, int, SK_U8*);
-extern int SkPciWriteCfgDWord(SK_AC*, int, SK_U32);
extern int SkPciWriteCfgWord(SK_AC*, int, SK_U16);
extern int SkPciWriteCfgByte(SK_AC*, int, SK_U8);
extern int SkDrvEvent(SK_AC*, SK_IOC IoC, SK_U32, SK_EVPARA);
--- linux-2.6.12-rc2-mm3-full/drivers/net/sk98lin/sklm80.c.old 2005-04-20 00:17:33.000000000 +0200
+++ linux-2.6.12-rc2-mm3-full/drivers/net/sk98lin/sklm80.c 2005-04-20 00:18:15.000000000 +0200
@@ -34,79 +34,7 @@
#include "h/lm80.h"
#include "h/skdrv2nd.h" /* Adapter Control- and Driver specific Def. */
-#ifdef SK_DIAG
-#define BREAK_OR_WAIT(pAC,IoC,Event) SkI2cWait(pAC,IoC,Event)
-#else /* nSK_DIAG */
#define BREAK_OR_WAIT(pAC,IoC,Event) break
-#endif /* nSK_DIAG */
-
-#ifdef SK_DIAG
-/*
- * read the register 'Reg' from the device 'Dev'
- *
- * return read error -1
- * success the read value
- */
-int SkLm80RcvReg(
-SK_IOC IoC, /* Adapter Context */
-int Dev, /* I2C device address */
-int Reg) /* register to read */
-{
- int Val = 0;
- int TempExt;
-
- /* Signal device number */
- if (SkI2cSndDev(IoC, Dev, I2C_WRITE)) {
- return(-1);
- }
-
- if (SkI2cSndByte(IoC, Reg)) {
- return(-1);
- }
-
- /* repeat start */
- if (SkI2cSndDev(IoC, Dev, I2C_READ)) {
- return(-1);
- }
-
- switch (Reg) {
- case LM80_TEMP_IN:
- Val = (int)SkI2cRcvByte(IoC, 1);
-
- /* First: correct the value: it might be negative */
- if ((Val & 0x80) != 0) {
- /* Value is negative */
- Val = Val - 256;
- }
- Val = Val * SK_LM80_TEMP_LSB;
- SkI2cStop(IoC);
-
- TempExt = (int)SkLm80RcvReg(IoC, LM80_ADDR, LM80_TEMP_CTRL);
-
- if (Val > 0) {
- Val += ((TempExt >> 7) * SK_LM80_TEMPEXT_LSB);
- }
- else {
- Val -= ((TempExt >> 7) * SK_LM80_TEMPEXT_LSB);
- }
- return(Val);
- break;
- case LM80_VT0_IN:
- case LM80_VT1_IN:
- case LM80_VT2_IN:
- case LM80_VT3_IN:
- Val = (int)SkI2cRcvByte(IoC, 1) * SK_LM80_VT_LSB;
- break;
-
- default:
- Val = (int)SkI2cRcvByte(IoC, 1);
- break;
- }
-
- SkI2cStop(IoC);
- return(Val);
-}
-#endif /* SK_DIAG */
/*
* read a sensors value (LM80 specific)
--- linux-2.6.12-rc2-mm3-full/drivers/net/sk98lin/skgemib.c.old 2005-04-20 00:20:11.000000000 +0200
+++ linux-2.6.12-rc2-mm3-full/drivers/net/sk98lin/skgemib.c 2005-04-20 00:20:17.000000000 +0200
@@ -871,13 +871,6 @@
sizeof(SK_PNMI_CONF),
SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfPhyType),
SK_PNMI_RO, MacPrivateConf, 0},
-#ifdef SK_PHY_LP_MODE
- {OID_SKGE_PHY_LP_MODE,
- SK_PNMI_MAC_ENTRIES,
- sizeof(SK_PNMI_CONF),
- SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfPhyMode),
- SK_PNMI_RW, MacPrivateConf, 0},
-#endif
{OID_SKGE_LINK_CAP,
SK_PNMI_MAC_ENTRIES,
sizeof(SK_PNMI_CONF),
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/