SATA/ATAPI

[Tais M. Hansen]

Hi,

I know there has been some talking about SATA/ATAPI being experimental and 
might not work at all under kernel-2.6.x.

One of my linux boxes has a Plextor DVD-RW drive with a SATA interface. The 
kernel sees this drive (ata3) but apparently doesn't tie it to a sdx device. 
The box also have a SATA harddisk, which is working just fine. The relevant 
dmesg output is pasted below.

Is there anything I can do to help the development of SATA/ATAPI devices?



libata version 1.10 loaded.
sata_promise version 1.01
ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 18 (level, low) -> IRQ 18
ata1: SATA max UDMA/133 cmd 0xF8804200 ctl 0xF8804238 bmdma 0x0 irq 18
ata2: SATA max UDMA/133 cmd 0xF8804280 ctl 0xF88042B8 bmdma 0x0 irq 18
ata1: dev 0 cfg 49:2f00 82:7c6b 83:7b09 84:4003 85:7c69 86:3a01 87:4003 
88:407f
ata1: dev 0 ATA, max UDMA/133, 240121728 sectors:
ata1: dev 0 configured for UDMA/133
scsi0 : sata_promise
ata2: no device found (phy stat 00000000)
scsi1 : sata_promise
  Vendor: ATA       Model: Maxtor 6Y120M0    Rev: YAR5
  Type:   Direct-Access                      ANSI SCSI revision: 05
sata_via version 1.1
ACPI: PCI interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20
sata_via(0000:00:0f.0): routed to hard irq line 4
ata3: SATA max UDMA/133 cmd 0xE800 ctl 0xE402 bmdma 0xD400 irq 20
ata4: SATA max UDMA/133 cmd 0xE000 ctl 0xD802 bmdma 0xD408 irq 20
ata3: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 
88:0007
ata3: dev 0 ATAPI, max UDMA/33
ata3: dev 0 configured for UDMA/33
scsi2 : sata_via
ata4: no device found (phy stat 00000000)
scsi3 : sata_via
SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB)
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0

-- 
Regards,
Tais M. Hansen
OSD

___________________________________________________________
"If people had understood how patents would be granted when most of today's 
ideas were invented and had taken out patents, the industry would be at a 
complete standstill today." -Bill Gates (1991)

Attachment: pgp00000.pgp
Description: PGP signature