Re: i830 lockup

[Chris Wedgwood]

On Fri, Apr 22, 2005 at 05:39:02PM +0530, Harish K Harshan wrote:

> But the system works pretty fine when other applications are
> running.

so either the driver is poking something that is causing problems or
maybe the card when operating makes the system unstabel

> Oncei load the driver, the system gets messed up. Could it be the
> problem with the way I handle DMA and interrupts??

maybe, but i would wouldn't think so

> I mean, is it possible to mess up everything by wrong programming???

yes

> This driver works prefectly on the other IPCs we have, but not on
> the two-piece board (Chino-Laxons) systems we have.

if these are embedded system they might have some weird wiring or
similar (embedded PCs used to have lots of strangeness to them, i
assume that hasn't changed)

> The DMA channels are both free before loading the drivers all the
> time, and one it is loaded, the /proc/dma file shows the DMA has
> been hooked properly. Could it still be the problem with the
> CPU/Cache/Chipset as you said?

i would ask the mainboard maker and also make sure you have the most
recent bios

also make sure your driver isn't stomping on bad memory in the slight
chance it whacking chipset registers I guess
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/