Re: ide-cd? Can burn DVDs, just not read them...
From: Lennart Sorensen
Date: Mon Apr 25 2005 - 15:36:26 EST
On Mon, Apr 25, 2005 at 10:55:15AM -0700, Randy Gardner wrote:
> Don't have an easy way to test that; I'd have to take it back to the
> person with a dual-boot box, as I'm pretty sure their update utility is
> a windoze bianry...
You should be able to see the firmware version using one of the cd
writing tools (cdrecord or dvd+rw-mediainfo or whichever). Comparing to
what the manufacturer has on offer could at least tell that. As for
updating, if it isn't a plextor it almost certainly requries windows
and/or dos to update (usually windows it seems).
> But, since problems are also happening with my cd-rw drive (even with
> the dvd-rw out of the system), which I know worked before, I don't think
> it's a drive problem.
Well that does sound odd. Is this your own kernel build from plain
kernel.org sources or are there any patches involved?
> Originally it shared a cable with my cd-rw drive, but I've tried it both
> on its own cable and sharing with one of my hard drives, on both the
> ata/66 controller and the ata/100 raid controller, with no changes at all.
As far as I know, promise cards are only recommended for harddisks, but
I am not sure of that. I have only ever used them for harddisks myself.
> 80 conductor cables for all tests. I might be able to dig up a 40
> conductor one for testing, but I don't think that'll help...
Different cables tried? Just in case you have a bad cable in there?
> Someone suggested I try a binary search of kernel versions to figure out
> exactly when the cd-rw drive was broken (which worked before, unlike the
> dvd, which I have no idea if it ever worked), in an effort to figure out
> what caused it to break... going to try this, but haven't had the
> time... a long project. :)
Well so far I have had no problems reading or writing with 2.6.11,
2.6.10, 2.6.8, and some earlier 2.6 kernels (all Debian sarge or sid
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/