[PATCH][Update] i386: fix hpet for systems that don't supportlegacy replacement (v. A1)
From: john stultz
Date: Mon Apr 25 2005 - 17:55:57 EST
Andrew,
Currently the i386 HPET code assumes the entire HPET
implementation from the spec is present. This breaks on boxes that do
not implement the optional legacy timer replacement functionality
portion of the spec.
This patch, which is very similar to my x86-64 patch for the same issue,
fixes the problem allowing i386 systems that cannot use the HPET for the
timer interrupt and RTC to still use the HPET as a time source. I've
tested this patch on a system systems without HPET, with HPET but
without legacy timer replacement, as well as HPET with legacy timer
replacement.
This version fixes whitespace bug and corrects a printk message.
Please consider for inclusion into your tree.
thanks
-john
Changelog
A0: First sent to lkml for review
A1: Fixes whitespace and printk message
diff -Nru a/arch/i386/kernel/time.c b/arch/i386/kernel/time.c
--- a/arch/i386/kernel/time.c 2005-04-25 15:42:40 -07:00
+++ b/arch/i386/kernel/time.c 2005-04-25 15:42:40 -07:00
@@ -441,7 +441,7 @@
set_normalized_timespec(&wall_to_monotonic,
-xtime.tv_sec, -xtime.tv_nsec);
- if (hpet_enable() >= 0) {
+ if ((hpet_enable() >= 0) && hpet_use_timer) {
printk("Using HPET for base-timer\n");
}
diff -Nru a/arch/i386/kernel/time_hpet.c b/arch/i386/kernel/time_hpet.c
--- a/arch/i386/kernel/time_hpet.c 2005-04-25 15:42:40 -07:00
+++ b/arch/i386/kernel/time_hpet.c 2005-04-25 15:42:40 -07:00
@@ -26,6 +26,7 @@
static unsigned long hpet_period; /* fsecs / HPET clock */
unsigned long hpet_tick; /* hpet clks count per tick */
unsigned long hpet_address; /* hpet memory map physical address */
+int hpet_use_timer;
static int use_hpet; /* can be used for runtime check of hpet */
static int boot_hpet_disable; /* boottime override for HPET timer */
@@ -73,27 +74,30 @@
hpet_writel(0, HPET_COUNTER);
hpet_writel(0, HPET_COUNTER + 4);
- /*
- * Set up timer 0, as periodic with first interrupt to happen at
- * hpet_tick, and period also hpet_tick.
- */
- cfg = hpet_readl(HPET_T0_CFG);
- cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC |
- HPET_TN_SETVAL | HPET_TN_32BIT;
- hpet_writel(cfg, HPET_T0_CFG);
-
- /*
- * The first write after writing TN_SETVAL to the config register sets
- * the counter value, the second write sets the threshold.
- */
- hpet_writel(tick, HPET_T0_CMP);
- hpet_writel(tick, HPET_T0_CMP);
+ if (hpet_use_timer) {
+ /*
+ * Set up timer 0, as periodic with first interrupt to happen at
+ * hpet_tick, and period also hpet_tick.
+ */
+ cfg = hpet_readl(HPET_T0_CFG);
+ cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC |
+ HPET_TN_SETVAL | HPET_TN_32BIT;
+ hpet_writel(cfg, HPET_T0_CFG);
+ /*
+ * The first write after writing TN_SETVAL to the config register sets
+ * the counter value, the second write sets the threshold.
+ */
+ hpet_writel(tick, HPET_T0_CMP);
+ hpet_writel(tick, HPET_T0_CMP);
+ }
/*
* Go!
*/
cfg = hpet_readl(HPET_CFG);
- cfg |= HPET_CFG_ENABLE | HPET_CFG_LEGACY;
+ if (hpet_use_timer)
+ cfg |= HPET_CFG_LEGACY;
+ cfg |= HPET_CFG_ENABLE;
hpet_writel(cfg, HPET_CFG);
return 0;
@@ -128,12 +132,11 @@
* However, we can do with one timer otherwise using the
* the single HPET timer for system time.
*/
- if (
#ifdef CONFIG_HPET_EMULATE_RTC
- !(id & HPET_ID_NUMBER) ||
-#endif
- !(id & HPET_ID_LEGSUP))
+ if (!(id & HPET_ID_NUMBER))
return -1;
+#endif
+
hpet_period = hpet_readl(HPET_PERIOD);
if ((hpet_period < HPET_MIN_PERIOD) || (hpet_period > HPET_MAX_PERIOD))
@@ -152,6 +155,8 @@
if (hpet_tick_rem > (hpet_period >> 1))
hpet_tick++; /* rounding the result */
+ hpet_use_timer = id & HPET_ID_LEGSUP;
+
if (hpet_timer_stop_set_go(hpet_tick))
return -1;
@@ -202,7 +207,8 @@
#endif
#ifdef CONFIG_X86_LOCAL_APIC
- wait_timer_tick = wait_hpet_tick;
+ if (hpet_use_timer)
+ wait_timer_tick = wait_hpet_tick;
#endif
return 0;
}
diff -Nru a/arch/i386/kernel/timers/timer_hpet.c b/arch/i386/kernel/timers/timer_hpet.c
--- a/arch/i386/kernel/timers/timer_hpet.c 2005-04-25 15:42:41 -07:00
+++ b/arch/i386/kernel/timers/timer_hpet.c 2005-04-25 15:42:41 -07:00
@@ -79,7 +79,7 @@
eax = hpet_readl(HPET_COUNTER);
eax -= hpet_last; /* hpet delta */
-
+ eax = min(hpet_tick, eax);
/*
* Time offset = (hpet delta) * ( usecs per HPET clock )
* = (hpet delta) * ( usecs per tick / HPET clocks per tick)
@@ -105,9 +105,12 @@
last_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low;
rdtsc(last_tsc_low, last_tsc_high);
- offset = hpet_readl(HPET_T0_CMP) - hpet_tick;
- if (unlikely(((offset - hpet_last) > hpet_tick) && (hpet_last != 0))) {
- int lost_ticks = (offset - hpet_last) / hpet_tick;
+ if (hpet_use_timer)
+ offset = hpet_readl(HPET_T0_CMP) - hpet_tick;
+ else
+ offset = hpet_readl(HPET_COUNTER);
+ if (unlikely(((offset - hpet_last) >= (2*hpet_tick)) && (hpet_last != 0))) {
+ int lost_ticks = ((offset - hpet_last) / hpet_tick) - 1;
jiffies_64 += lost_ticks;
}
hpet_last = offset;
diff -Nru a/arch/i386/kernel/timers/timer_tsc.c b/arch/i386/kernel/timers/timer_tsc.c
--- a/arch/i386/kernel/timers/timer_tsc.c 2005-04-25 15:42:40 -07:00
+++ b/arch/i386/kernel/timers/timer_tsc.c 2005-04-25 15:42:41 -07:00
@@ -477,7 +477,7 @@
if (cpu_has_tsc) {
unsigned long tsc_quotient;
#ifdef CONFIG_HPET_TIMER
- if (is_hpet_enabled()){
+ if (is_hpet_enabled() && hpet_use_timer) {
unsigned long result, remain;
printk("Using TSC for gettimeofday\n");
tsc_quotient = calibrate_tsc_hpet(NULL);
diff -Nru a/include/asm-i386/hpet.h b/include/asm-i386/hpet.h
--- a/include/asm-i386/hpet.h 2005-04-25 15:42:40 -07:00
+++ b/include/asm-i386/hpet.h 2005-04-25 15:42:40 -07:00
@@ -92,6 +92,7 @@
extern unsigned long hpet_tick; /* hpet clks count per tick */
extern unsigned long hpet_address; /* hpet memory map physical address */
+extern int hpet_use_timer;
extern int hpet_rtc_timer_init(void);
extern int hpet_enable(void);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/