Re: IRQ Disabling

[Robert Hancock]

Al Niessner wrote:
> 1) Write some general handler that resets the IRQ and nothing else and
> install it as the default handler instead of the current one that is
> disabling the IRQ?

The only thing the kernel can do generically in this case is what it's 
doing already - disabling the interrupt line. What needs to be done to a 
device to clear the interrupt is device-dependent. If the interrupt 
doesn't get cleared by the handler, it will just keep interrupting 
continuously and using a ton of CPU time.

You could try disabling the USB controller and see if the APC card still 
is producing spurious interrupts. If that's the case, though, fixing the 
driver (so that it properly recognizes the interrupts) or the hardware 
(so it doesn't generate spurious interrupts) is about the only option.

--
Robert Hancock      Saskatoon, SK, Canada
To email, remove "nospam" from hancockr@xxxxxxxxxxxxx
Home Page: http://www.roberthancock.com/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/