Re: [PATCH] 2.4.30 PicoPower IRQ router

[Domen Puncer]

On 26/04/05 21:00 +0200, Sune Mølgaard wrote:
> Alessandro Amici wrote:
> >just in case you didn't notice: your patch is empty :)
> 
> How so? I see it fine in the mail that came back to me, but ok. I'll
> repost below.
> 
> >and try to gather info on someone actually in charge of the subsystem 
> >you are modifying and CC him. random patches on l-k may not get the 
> >needed attention.
> >
> 
> I thought of that and forwarded to Martin Mares, but thank you for the tip
> 
> Best regards,
> 
> Sune
> 
> --Start patch--

Signed-off-by? And weird indentification, try to use tabs.

> 
> --- linux-2.4.30/arch/i386/kernel/pci-irq.c	2005-04-04
> 03:42:19.000000000 +0200
> +++ linux/arch/i386/kernel/pci-irq.c	2005-04-25 08:43:02.501678464 +0200
> @@ -157,6 +157,25 @@
>  }
> 
>  /*
> + * PicoPower PT86C523
> + */
> +
> +static int pirq_pico_get(struct pci_dev *router, struct pci_dev *dev,
> int pirq)
> +{
> +  outb(0x10+((pirq-1)>>1), 0x24);
> +  return ((pirq-1)&1) ? (inb(0x26)>>4) : (inb(0x26)&0xf);
> +}
> +
> +static int pirq_pico_set(struct pci_dev *router, struct pci_dev *dev,
> int pirq, int irq)
> +{
> +  outb(0x10+((pirq-1)>>1), 0x24);
> +  unsigned int x;
> +  x = inb(0x26);
> +  x = ((pirq-1)&1) ? ((x&0x0f)|(irq<<4)) : ((x&0xf0)|(irq));
> +  outb(x,0x26);
> +}

I really don't know about this, but existing code (2.6.x) uses
{read,write}_config_nybble which looks suspiciously similar.

> +
> +/*
>   * ALI pirq entries are damn ugly, and completely undocumented.
>   * This has been figured out from pirq tables, and it's not a pretty
>   * picture.
> @@ -609,6 +628,23 @@
> 
>  #endif
> 
> +static __init int pico_router_probe(struct irq_router *r, struct
> pci_dev *router, u16 device)
> +{
> +  switch(device)
> +  {
> +    case 0x0002:

Use/define some PCI_DEVICE_ID_

> +      r->name = "PicoPower PT86C523";
> +      r->get = pirq_pico_get;
> +      r->set = pirq_pico_set;
> +      return 1;
> +
> +    case 0x8002:
> +      r->name = "PicoPower PT86C523 rev. BB+";
> +      r->get = pirq_pico_get;
> +      r->set = pirq_pico_set;
> +      return 1;
> +  }
> +}

return 0; missing

> 
>  static __init int intel_router_probe(struct irq_router *r, struct
> pci_dev *router, u16 device)
>  {
> @@ -814,6 +850,7 @@
>  }
>  		
>  static __initdata struct irq_router_handler pirq_routers[] = {
> +        { 0x1066, pico_router_probe },

PCI_VENDOR_ID_?

>  	{ PCI_VENDOR_ID_INTEL, intel_router_probe },
>  	{ PCI_VENDOR_ID_AL, ali_router_probe },
>  	{ PCI_VENDOR_ID_ITE, ite_router_probe },
> 


	Domen
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/