Re: 2.6.12-rc3 won't boot from aic7899

[K.R. Foley]

James Bottomley wrote:
> On Fri, 2005-04-22 at 22:50 -0500, K.R. Foley wrote:
>
> > scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
> >        <Adaptec aic7899 Ultra160 SCSI adapter>
> >        aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
> >
> >  Vendor: SEAGATE   Model: SX118273LC        Rev: 6679
> >  Type:   Direct-Access                      ANSI SCSI revision: 02
> > scsi1:A:0:0: Tagged Queuing enabled.  Depth 32
> > target1:0:0: Beginning Domain Validation
> > (scsi1:A:0): 6.600MB/s transfers (16bit)
> > (scsi1:A:0:0): parity error detected in Data-in phase. SEQADDR(0x6b)
> > SCSIRATE(0x80)

Hi James,

> I assume it just locks up after this?

Yes. You assume correctly.

> It looks like the parity error isn't propagating upwards like it should.
> What did a 2.6.11 boot sequence show for this (i.e. did the internal
> aic7xxx DV configure the device narrow)?

I am attaching the relevant part of the successful boot log from 
2.6.12-rc2. I don't have a 2.6.11 boot log handy. I can boot it when I 
get home if it will help. I don't know if it is worth mentioning or not, 
but I have had to compile in the SCSI drivers since 2.6.12-rc1. Don't 
know if it's related to this or not.

One other note: I spent enough time tracing this to find that the 
message "target1:0:0: Beginning Domain Validation" seems to be generated 
by code that is in aic79xx_osm. Is this common code or should this code 
not be getting executed for aic7899 cards?

> I suspect the attached patch might fix this in the core driver, if you
> could try it out.

I'll be happy to try this when I get home.

> Thanks,
>
> James
<snip>

thanks,

--
   kr
Apr 24 23:23:30 porky kernel: scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
Apr 24 23:23:30 porky kernel:         <Adaptec aic7899 Ultra160 SCSI adapter>
Apr 24 23:23:30 porky kernel:         aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
Apr 24 23:23:30 porky kernel: 
Apr 24 23:23:30 porky kernel: (scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit)
Apr 24 23:23:30 porky kernel:   Vendor: QUANTUM   Model: ATLAS10K2-TY092L  Rev: DA40
Apr 24 23:23:30 porky kernel:   Type:   Direct-Access                      ANSI SCSI revision: 03
Apr 24 23:23:30 porky kernel: scsi0:A:0:0: Tagged Queuing enabled.  Depth 32
Apr 24 23:23:30 porky kernel: scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
Apr 24 23:23:30 porky kernel:         <Adaptec aic7899 Ultra160 SCSI adapter>
Apr 24 23:23:30 porky kernel:         aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
Apr 24 23:23:30 porky kernel: 
Apr 24 23:23:30 porky kernel: (scsi1:A:0): 20.000MB/s transfers (20.000MHz, offset 15)
Apr 24 23:23:31 porky kernel:   Vendor: SEAGATE   Model: SX118273LC        Rev: 6679
Apr 24 23:23:31 porky netfs: Mounting other filesystems:  succeeded
Apr 24 23:23:31 porky kernel:   Type:   Direct-Access                      ANSI SCSI revision: 02
Apr 24 23:23:31 porky kernel: scsi1:A:0:0: Tagged Queuing enabled.  Depth 32
Apr 24 23:23:31 porky kernel: SCSI device sda: 17783239 512-byte hdwr sectors (9105 MB)
Apr 24 23:23:31 porky kernel: SCSI device sda: drive cache: write back
Apr 24 23:23:31 porky kernel: SCSI device sda: 17783239 512-byte hdwr sectors (9105 MB)
Apr 24 23:23:31 porky kernel: SCSI device sda: drive cache: write back
Apr 24 23:23:31 porky kernel:  sda: sda1 sda2 sda3
Apr 24 23:23:31 porky kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Apr 24 23:23:31 porky kernel: SCSI device sdb: 35566480 512-byte hdwr sectors (18210 MB)
Apr 24 23:23:31 porky kernel: SCSI device sdb: drive cache: write through
Apr 24 23:23:31 porky kernel: SCSI device sdb: 35566480 512-byte hdwr sectors (18210 MB)
Apr 24 18:22:56 porky rc.sysinit: -e 
Apr 24 23:23:31 porky kernel: SCSI device sdb: drive cache: write through
Apr 24 18:22:59 porky udevsend[1235]: starting udevd daemon 
Apr 24 23:23:31 porky kernel:  sdb: sdb1
Apr 24 18:22:59 porky scsi.agent[1247]: disk at /devices/pci0000:00/0000:00:1e.0/0000:04:05.0/host0/target0:0:0/0:0:0:0 
Apr 24 23:23:31 porky kernel: Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
Apr 24 18:22:59 porky scsi.agent[1272]: disk at /devices/pci0000:00/0000:00:1e.0/0000:04:05.1/host1/target1:0:0/1:0:0:0 
Apr 24 23:23:31 porky kernel: Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
Apr 24 18:22:59 porky udevsend[1288]: starting udevd daemon 
Apr 24 23:23:31 porky kernel: Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0,  type 0
Apr 24 18:23:12 porky start_udev: Starting udev:  succeeded