Re: Emulex fibre channel HBA support and SAN connection

[Alex Deucher]

On 4/29/05, James.Smart@xxxxxxxxxx <James.Smart@xxxxxxxxxx> wrote:
> Based on the "Unknown IOCB command data" message, this appears to be out of date firmware on the adapter. See http://www.emulex.com/ts/indexemu.html.  There are some hints on downloading firmware at the tail end of  http://sourceforge.net/forum/forum.php?thread_id=1130082&forum_id=355154.
> 
> Note: lpfc issues are best posted to the help areas on http://sourceforge.net/projects/lpfcxxxx/


James,

    I just upgraded to the latest firmware on the Emulex website
(3.92a2) and I still get the same error:
Emulex LightPulse Fibre Channel SCSI driver 8.0.28
scsi2 :  on PCI bus 00 device 20 irq 8132864
lpfc 0001:00:04.0: 0:1303 Link Up Event x1 received Data: x1 xf7 x8 x0
lpfc 0001:00:04.0: 0:0321 Unknown IOCB command Data: x0, xa2 x0 x600 x2900
lpfc 0001:00:04.0: 0:0327 Rsp ring 0 error -  command completion for
iotag x0 not found
...
lpfc 0001:00:04.0: 0:0748 abort handler timed out waiting for abort to
complete. Data: x0 x0 x0 x1
lpfc 0001:00:04.0: 0:0327 Rsp ring 0 error -  command completion for
iotag x700 not found
lpfc 0001:00:04.0: 0:0327 Rsp ring 0 error -  command completion for
iotag x0 not found


Any ideas?

> 
> Thanks.
> 
> -- James Smart
>    Emulex
> 
> > -----Original Message-----
> > From: linux-scsi-owner@xxxxxxxxxxxxxxx
> > [mailto:linux-scsi-owner@xxxxxxxxxxxxxxx]On Behalf Of Alex Deucher
> > Sent: Thursday, April 28, 2005 6:03 PM
> > To: linux-kernel@xxxxxxxxxxxxxxx; linux-scsi@xxxxxxxxxxxxxxx
> > Subject: Emulex fibre channel HBA support and SAN connection
> >
> >
> > Can someone point me to some documentation on setting up a fibre
> > channel HBA in linux?  I can't seem to find any useful information.  I
> > have a Sun 220R running 2.6.12-rc3 with an emulex LP9000 HBA connected
> > to a Nexsan ATABEAST SAN.  I'm using the HBA driver included with the
> > 2.6.12rc3 kernel.  I cannot find any information about the GPLed
> > emulex driver as far as configuration goes.  The driver seems to come
> > up ok, but then I get a series of error codes:
> >
> > Emulex LightPulse Fibre Channel SCSI driver 8.0.28
> > scsi0 :  on PCI bus 00 device 20 irq 8255744
> > lpfc 0001:00:04.0: 0:1303 Link Up Event x1 received Data: x1 x1 x8 x2
> > lpfc 0001:00:04.0: 0:0321 Unknown IOCB command Data: x0, xa2
> > x0 x900 x2600
> > ...
> > lpfc 0001:00:04.0: 0:0748 abort handler timed out waiting for abort to
> > complete. Data: x0 x0 x0 x1
> > lpfc 0001:00:04.0: 0:0327 Rsp ring 0 error -  command completion for
> > iotag xa00 not found
> > lpfc 0001:00:04.0: 0:0327 Rsp ring 0 error -  command completion for
> > iotag x0 not found
> > lpfc 0001:00:04.0: 0:0713 SCSI layer issued LUN reset (0, 0)
> > Data: x2 x0 x0
> > lpfc 0001:00:04.0: 0:0327 Rsp ring 0 error -  command completion for
> > iotag xb00 not found
> > lpfc 0001:00:04.0: 0:0327 Rsp ring 0 error -  command completion for
> > iotag x0 not found
> > lpfc 0001:00:04.0: 0:0714 SCSI layer issued Bus Reset Data: x2003
> > scsi: Device offlined - not ready after error recovery: host 0 channel
> > 0 id 0 lun 0
> > lpfc 0001:00:04.0: 0:0327 Rsp ring 0 error -  command completion for
> > iotag x0 not found
> >
> > I noticed here:
> > http://marc.theaimsgroup.com/?l=linux-scsi&m=111383889908554&w=2
> > that there is a new FC API. Was this merged into rc3 or will this
> > happen after 2.6.12?  If it's not supported yet in rc3, how does one
> > go about configuring it?  I'm willing to test any available tools.
> >
> > Any help will be greatly appreciated.  I'll be able to test on SPARC64
> > right now and on AMD64 in the next few days.
> >
> > Thanks,
> >
> > Alex
> >
> > PS, please CC: me as I'm not subscribed.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/