[PATCH] ppc32: Converted MPC10X bridge to use platform devicesinstead of OCP
From: Kumar Gala
Date: Fri Jun 03 2005 - 15:34:15 EST
Converted the MPC10x bridge support (used by MPC10x and 8240/1/5) to
used the standard platform device model.
Signed-off-by: Matt McClintock <msm@xxxxxxxxxxxxx>
Signed-off-by: Kumar Gala <kumar.gala@xxxxxxxxxxxxx>
---
commit c4fa624a5c007f17142ab5225d1085564ffa8f83
tree 63546f2e7de561696db29a0a481bf40c449e9f0e
parent e832e0d9e4878d02ab2ef6bad5971dc9f9cd7679
author Kumar K. Gala <kumar.gala@xxxxxxxxxxxxx> Fri, 03 Jun 2005 14:20:50 -0500
committer Kumar K. Gala <kumar.gala@xxxxxxxxxxxxx> Fri, 03 Jun 2005 14:20:50 -0500
arch/ppc/Kconfig | 5 -
arch/ppc/kernel/setup.c | 4
arch/ppc/syslib/Makefile | 2
arch/ppc/syslib/mpc10x_common.c | 177 +++++++++++++++++++++++++++++----------
include/asm-ppc/mpc10x.h | 6 +
include/asm-ppc/ppc_sys.h | 2
6 files changed, 144 insertions(+), 52 deletions(-)
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -826,11 +826,6 @@ config MPC10X_BRIDGE
depends on PCORE || POWERPMC250 || LOPEC || SANDPOINT
default y
-config FSL_OCP
- bool
- depends on MPC10X_BRIDGE
- default y
-
config MPC10X_OPENPIC
bool
depends on POWERPMC250 || LOPEC || SANDPOINT
diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c
--- a/arch/ppc/kernel/setup.c
+++ b/arch/ppc/kernel/setup.c
@@ -41,7 +41,7 @@
#include <asm/xmon.h>
#include <asm/ocp.h>
-#if defined(CONFIG_85xx) || defined(CONFIG_83xx)
+#if defined(CONFIG_85xx) || defined(CONFIG_83xx) || defined(CONFIG_MPC10X_BRIDGE)
#include <asm/ppc_sys.h>
#endif
@@ -249,7 +249,7 @@ int show_cpuinfo(struct seq_file *m, voi
seq_printf(m, "bogomips\t: %lu.%02lu\n",
lpj / (500000/HZ), (lpj / (5000/HZ)) % 100);
-#if defined(CONFIG_85xx) || defined(CONFIG_83xx)
+#if defined(CONFIG_85xx) || defined(CONFIG_83xx) || defined(CONFIG_MPC10X_BRIDGE)
if (cur_ppc_sys_spec->ppc_sys_name)
seq_printf(m, "chipset\t\t: %s\n",
cur_ppc_sys_spec->ppc_sys_name);
diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
--- a/arch/ppc/syslib/Makefile
+++ b/arch/ppc/syslib/Makefile
@@ -92,7 +92,7 @@ ifeq ($(CONFIG_SERIAL_MPSC_CONSOLE),y)
obj-$(CONFIG_SERIAL_TEXT_DEBUG) += mv64x60_dbg.o
endif
obj-$(CONFIG_BOOTX_TEXT) += btext.o
-obj-$(CONFIG_MPC10X_BRIDGE) += mpc10x_common.o indirect_pci.o
+obj-$(CONFIG_MPC10X_BRIDGE) += mpc10x_common.o indirect_pci.o ppc_sys.o
obj-$(CONFIG_MPC10X_OPENPIC) += open_pic.o
obj-$(CONFIG_40x) += dcr.o
obj-$(CONFIG_BOOKE) += dcr.o
diff --git a/arch/ppc/syslib/mpc10x_common.c b/arch/ppc/syslib/mpc10x_common.c
--- a/arch/ppc/syslib/mpc10x_common.c
+++ b/arch/ppc/syslib/mpc10x_common.c
@@ -21,6 +21,9 @@
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/slab.h>
+#include <linux/serial_8250.h>
+#include <linux/fsl_devices.h>
+#include <linux/device.h>
#include <asm/byteorder.h>
#include <asm/io.h>
@@ -30,16 +33,7 @@
#include <asm/pci-bridge.h>
#include <asm/open_pic.h>
#include <asm/mpc10x.h>
-#include <asm/ocp.h>
-
-/* The OCP structure is fixed by code below, before OCP initialises.
- paddr depends on where the board places the EUMB.
- - fixed in mpc10x_bridge_init().
- irq depends on two things:
- > does the board use the EPIC at all? (PCORE does not).
- > is the EPIC in serial or parallel mode?
- - fixed in mpc10x_set_openpic().
-*/
+#include <asm/ppc_sys.h>
#ifdef CONFIG_MPC10X_OPENPIC
#ifdef CONFIG_EPIC_SERIAL_MODE
@@ -51,34 +45,127 @@
#define MPC10X_DMA0_IRQ (EPIC_IRQ_BASE + 1 + NUM_8259_INTERRUPTS)
#define MPC10X_DMA1_IRQ (EPIC_IRQ_BASE + 2 + NUM_8259_INTERRUPTS)
#else
-#define MPC10X_I2C_IRQ OCP_IRQ_NA
-#define MPC10X_DMA0_IRQ OCP_IRQ_NA
-#define MPC10X_DMA1_IRQ OCP_IRQ_NA
+#define MPC10X_I2C_IRQ -1
+#define MPC10X_DMA0_IRQ -1
+#define MPC10X_DMA1_IRQ -1
#endif
-
-struct ocp_def core_ocp[] = {
- { .vendor = OCP_VENDOR_INVALID
- }
+static struct fsl_i2c_platform_data mpc10x_i2c_pdata = {
+ .device_flags = 0,
};
-static struct ocp_fs_i2c_data mpc10x_i2c_data = {
- .flags = 0
+static struct plat_serial8250_port serial_platform_data[] = {
+ { },
};
-static struct ocp_def mpc10x_i2c_ocp = {
- .vendor = OCP_VENDOR_MOTOROLA,
- .function = OCP_FUNC_IIC,
- .index = 0,
- .additions = &mpc10x_i2c_data
+
+struct platform_device ppc_sys_platform_devices[] = {
+ [MPC10X_IIC1] = {
+ .name = "fsl-i2c",
+ .id = 1,
+ .dev.platform_data = &mpc10x_i2c_pdata,
+ .num_resources = 2,
+ .resource = (struct resource[]) {
+ {
+ .start = MPC10X_EUMB_I2C_OFFSET,
+ .end = MPC10X_EUMB_I2C_OFFSET +
+ MPC10X_EUMB_I2C_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .flags = IORESOURCE_IRQ
+ },
+ },
+ },
+ [MPC10X_DMA0] = {
+ .name = "fsl-dma",
+ .id = 0,
+ .num_resources = 2,
+ .resource = (struct resource[]) {
+ {
+ .start = MPC10X_EUMB_DMA_OFFSET + 0x10,
+ .end = MPC10X_EUMB_DMA_OFFSET + 0x1f,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .flags = IORESOURCE_IRQ,
+ },
+ },
+ },
+ [MPC10X_DMA1] = {
+ .name = "fsl-dma",
+ .id = 1,
+ .num_resources = 2,
+ .resource = (struct resource[]) {
+ {
+ .start = MPC10X_EUMB_DMA_OFFSET + 0x20,
+ .end = MPC10X_EUMB_DMA_OFFSET + 0x2f,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .flags = IORESOURCE_IRQ,
+ },
+ },
+ },
+ [MPC10X_DMA1] = {
+ .name = "fsl-dma",
+ .id = 1,
+ .num_resources = 2,
+ .resource = (struct resource[]) {
+ {
+ .start = MPC10X_EUMB_DMA_OFFSET + 0x20,
+ .end = MPC10X_EUMB_DMA_OFFSET + 0x2f,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .flags = IORESOURCE_IRQ,
+ },
+ },
+ },
+ [MPC10X_DUART] = {
+ .name = "serial8250",
+ .id = 0,
+ .dev.platform_data = serial_platform_data,
+ },
};
-static struct ocp_def mpc10x_dma_ocp[2] = {
-{ .vendor = OCP_VENDOR_MOTOROLA,
- .function = OCP_FUNC_DMA,
- .index = 0 },
-{ .vendor = OCP_VENDOR_MOTOROLA,
- .function = OCP_FUNC_DMA,
- .index = 1 }
+/* We use the PCI ID to match on */
+struct ppc_sys_spec *cur_ppc_sys_spec;
+struct ppc_sys_spec ppc_sys_specs[] = {
+ {
+ .ppc_sys_name = "8245",
+ .mask = 0xFFFFFFFF,
+ .value = MPC10X_BRIDGE_8245,
+ .num_devices = 4,
+ .device_list = (enum ppc_sys_devices[])
+ {
+ MPC10X_IIC1, MPC10X_DMA0, MPC10X_DMA1, MPC10X_DUART,
+ },
+ },
+ {
+ .ppc_sys_name = "8240",
+ .mask = 0xFFFFFFFF,
+ .value = MPC10X_BRIDGE_8240,
+ .num_devices = 3,
+ .device_list = (enum ppc_sys_devices[])
+ {
+ MPC10X_IIC1, MPC10X_DMA0, MPC10X_DMA1,
+ },
+ },
+ {
+ .ppc_sys_name = "107",
+ .mask = 0xFFFFFFFF,
+ .value = MPC10X_BRIDGE_107,
+ .num_devices = 3,
+ .device_list = (enum ppc_sys_devices[])
+ {
+ MPC10X_IIC1, MPC10X_DMA0, MPC10X_DMA1,
+ },
+ },
+ { /* default match */
+ .ppc_sys_name = "",
+ .mask = 0x00000000,
+ .value = 0x00000000,
+ },
};
/* Set resources to match bridge memory map */
@@ -273,7 +360,7 @@ mpc10x_bridge_init(struct pci_controller
printk("Host bridge in Agent mode\n");
/* Read or Set LMBAR & PCSRBAR? */
}
-
+
/* Set base addr of the 8240/107 EUMB. */
early_write_config_dword(hose,
0,
@@ -287,17 +374,6 @@ mpc10x_bridge_init(struct pci_controller
ioremap(phys_eumb_base + MPC10X_EUMB_EPIC_OFFSET,
MPC10X_EUMB_EPIC_SIZE);
#endif
- mpc10x_i2c_ocp.paddr = phys_eumb_base + MPC10X_EUMB_I2C_OFFSET;
- mpc10x_i2c_ocp.irq = MPC10X_I2C_IRQ;
- ocp_add_one_device(&mpc10x_i2c_ocp);
- mpc10x_dma_ocp[0].paddr = phys_eumb_base +
- MPC10X_EUMB_DMA_OFFSET + 0x100;
- mpc10x_dma_ocp[0].irq = MPC10X_DMA0_IRQ;
- ocp_add_one_device(&mpc10x_dma_ocp[0]);
- mpc10x_dma_ocp[1].paddr = phys_eumb_base +
- MPC10X_EUMB_DMA_OFFSET + 0x200;
- mpc10x_dma_ocp[1].irq = MPC10X_DMA1_IRQ;
- ocp_add_one_device(&mpc10x_dma_ocp[1]);
}
#ifdef CONFIG_MPC10X_STORE_GATHERING
@@ -330,7 +406,7 @@ mpc10x_bridge_init(struct pci_controller
* 8245 (Rev 2., dated 10/2003) says PICR2[0] is reserverd.
*/
if (host_bridge == MPC10X_BRIDGE_8245) {
- ulong picr2;
+ u32 picr2;
early_read_config_dword(hose, 0, PCI_DEVFN(0,0),
MPC10X_CFG_PICR2_REG, &picr2);
@@ -340,6 +416,19 @@ mpc10x_bridge_init(struct pci_controller
early_write_config_dword(hose, 0, PCI_DEVFN(0,0),
MPC10X_CFG_PICR2_REG, picr2);
}
+
+ ppc_sys_fixup_mem_resource (ppc_sys_platform_devices,
+ phys_eumb_base);
+
+ /* IRQ's are determined at runtime */
+ ppc_sys_platform_devices[MPC10X_IIC1].resource[1].start = MPC10X_I2C_IRQ;
+ ppc_sys_platform_devices[MPC10X_IIC1].resource[1].end = MPC10X_I2C_IRQ;
+ ppc_sys_platform_devices[MPC10X_DMA0].resource[1].start = MPC10X_DMA0_IRQ;
+ ppc_sys_platform_devices[MPC10X_DMA0].resource[1].end = MPC10X_DMA0_IRQ;
+ ppc_sys_platform_devices[MPC10X_DMA1].resource[1].start = MPC10X_DMA1_IRQ;
+ ppc_sys_platform_devices[MPC10X_DMA1].resource[1].end = MPC10X_DMA1_IRQ;
+
+ identify_ppc_sys_by_id (host_bridge);
if (ppc_md.progress) ppc_md.progress("mpc10x:exit", 0x100);
return 0;
diff --git a/include/asm-ppc/mpc10x.h b/include/asm-ppc/mpc10x.h
--- a/include/asm-ppc/mpc10x.h
+++ b/include/asm-ppc/mpc10x.h
@@ -159,6 +159,12 @@ extern unsigned long ioremap_base;
#define MPC10X_MAPA_EUMB_BASE (ioremap_base - MPC10X_EUMB_SIZE)
#define MPC10X_MAPB_EUMB_BASE MPC10X_MAPA_EUMB_BASE
+enum ppc_sys_devices {
+ MPC10X_IIC1,
+ MPC10X_DMA0,
+ MPC10X_DMA1,
+ MPC10X_DUART,
+};
int mpc10x_bridge_init(struct pci_controller *hose,
uint current_map,
diff --git a/include/asm-ppc/ppc_sys.h b/include/asm-ppc/ppc_sys.h
--- a/include/asm-ppc/ppc_sys.h
+++ b/include/asm-ppc/ppc_sys.h
@@ -27,6 +27,8 @@
#include <asm/mpc85xx.h>
#elif defined(CONFIG_PPC_MPC52xx)
#include <asm/mpc52xx.h>
+#elif defined(CONFIG_MPC10X_BRIDGE)
+#include <asm/mpc10x.h>
#else
#error "need definition of ppc_sys_devices"
#endif
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/