Re: [PATCH][4/5] RapidIO support: ppc32

[Matt Porter]

On Wed, Jun 08, 2005 at 10:34:03AM -0500, Kumar Gala wrote:
> 
> On Jun 8, 2005, at 12:52 AM, Matt Porter wrote:
> 
> > On Tue, Jun 07, 2005 at 11:43:26PM -0500, Kumar Gala wrote:
> >> Two questions:
> >> 1. how well does will all of this handle > 32-bit phys addr?
> >
> > It does and it doesn't handle > 32-bit phys addr. It depends on which
> > configuration you are talking about.  If you are talking about I/O
> >> 32-bit, it's no problem.  If you are talking about handling DMA
> >> 32-bit,
> > then we need to handle a 64-bit DMA addr in the ppc32 implementations
> > and
> > also extend the arch messaging interface to let callers know when an
> > implementation can handle high DMA (system memory >4GB). This is all
> > pretty easy to handle once we need to support such a processor. So
> > far, nothing is available publicly. :)
> 
> Well 8548 is semi-public :)

Heh, well my definition is when Fscale has the reference manual
downloadable from the main website...as of last night that wasn't
the case for 8548. :)

<snip>

> >> I would prefer if we could have the memory offsets and irq's not be
> >> straight from the #define's
> >
> > I think this and #2 are separate issues. We can pass the mpc85xx
> > rio init code some parameters to abstract things to different
> > parts. This is similar to how we init different SoC's PCI host
> > bridges with some common code on PPC32 (marvell, 85xx, etc).
> >
> > I was just looking at doing this to support RIO on the 8548. At
> > the time I wrote this 85xx support there wasn't any info on the
> > 8548 available, but it's an easy thing to extend.
> 
> Agreed, they are separate issues, I'm cool on waiting to see what 
> happens with RIO <-> PCIE bridges in the future.  For now if you can 
> look at abstracting the offset, irq info that would be good (especially 
> since 8548 does msg'g a bit differently).

No problem. The first "ppc85xx_rio.c" was only intended to work on
the 8540/8560 stuff where I had hardware. From my look at 8548, it
shouldn't take much work.

-Matt
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/