RE: Kernel 2.6.12-rc6-mm1 & Chelsio driver

[Scott Bardone]

Lukas,

You can download the N210/N110 (ver 2.1.1) from the Chelsio website and use that driver for the T110 with a newer kernel. I have tested that driver up to the 2.6.11 kernel release. It will provide you NIC mode functinoality on your T110 TOE card, you can use it as a module, or try to patch it into a later kernel. If patching it into a kernel, you may need to modify the patch a bit.

-Scott


-----Original Message-----
From: Lukas Hejtmanek [mailto:xhejtman@xxxxxxxxxxxx]
Sent: Tue 6/7/2005 11:50 PM
To: Scott Bardone
Cc: Francois Romieu; Jeff Garzik; linux-kernel@xxxxxxxxxxxxxxx
Subject: Re: Kernel 2.6.12-rc6-mm1 & Chelsio driver
 
On Tue, Jun 07, 2005 at 07:19:46PM -0700, Scott Bardone wrote:
> It looks like you have a T110 card (10Gb TOE) by the device ID 0006.
> The Chelsio driver which is in the 2.6 mm tree only supports the NIC model 
> cards (N110 & N210).
> 
> We currently don't have the TOE API in the Linux kernel so the TOE 
> functionality does not exist, therefore you can only use the Chelsio 
> modified 2.6.6 kernel for TOE.
> 
> You will need to download the driver from Chelsio's website for the T110. 
> Please send me an email if you don't have a login.

Thanks, we have an account. But I wonder whether T110 card could be used in
newer kernel (as 2.6.6 is rather old and cat /proc/iomap segfaults in kernel).

We do not need TOE functionality, UDP transfer is just fine.

-- 
Lukás Hejtmánek



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/