Re: Fwd: Re: Performance figure for sx8 driver

[Kallol Biswas]

I have been investigating what the cause of performance loss could be.

I have noticed several things:

0) Setting to CARM_MAX_Q to 30 hangs. So we have been testing only with
CARM_MAX_Q == 1. The firmware has not been updated yet.

1) If we keep on increasing number of SATA disks, hdparm does not get
multiplied total read performance (hdparm -t ....).

With a Maxtor 60 GB disk with 8MB cache we get 50Mb/sec. If we put
two disks we get 35 on each. Total  70MB/sec. If we put more
then total does not get above 70MB/sec.

It  looks like that a part of the driver serializes the commands.
We have a 32 processor MIPS based system.

2) It looks like that there is while(1) loop under spinlock in isr
stack. If we start queuing many commands then it may take a while for
this loop to break. Though I am not quite familiar with the driver yet.

If we set CARM_MAX_Q to 30 then the request/response queue length should
also be increased right?

3)  Next I will put PCI-X analyzer and figure  out the root cause of
performance loss. May be need to get hold of the technical manual.

Kallol

On Sun, 2005-06-12 at 09:30, Mark Lord wrote:
> kallol@xxxxxxxxxxxxxx wrote:
> > 
> > 
> > Hello Jeff,
> >            How did you verify that performance improved making the
> > changes those
> > you suggested?
> > 
> > hdparm does not show it.
> 
> My hdparm tool performs a single I/O at a time,
> disregarding any kernel read-ahead that may be added on.
> 
> As such, it won't often show the effects of queued commands
> as well as some other test might.
> 
> Cheers
> -
> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/