Re: [RFT][PATCH] aic79xx: remove busyq

[Hannes Reinecke]

Jeff Garzik wrote:
> Can anyone with aic79xx hardware give me a simple "it works"
> or "this breaks things" answer, for the patch below?
> 
> This changes the aic79xx driver to use the standard Linux SCSI queueing
> code, rather than its own.  After applying this patch, NO behavior
> changes should be seen.
> 
> The patch is against 2.6.12-rc5, but probably applies OK to recent 2.6.x
> kernels.
> 
Hmm. Does not quite work here:

scsi0: Starting DV
scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11
        <Adaptec 29320 Ultra320 SCSI adapter>
        aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI 33 or 66Mhz,
512 SCBs

In DV Thread
scsi0: Beginning Domain Validation
scsi0:A:0:0: Performing DV
scsi0:2223: Going from state 0 to state 1
scsi0:A:0:0: Sending INQ
scsi0: Timeout while doing DV command 12.

And from there all hell breaks loose.

It looks as if it simply refuses to send any commands ...
Investigating.

Cheers,

Hannes
-- 
Dr. Hannes Reinecke			hare@xxxxxxx
SuSE Linux AG				S390 & zSeries
Maxfeldstraße 5				+49 911 74053 688
90409 Nürnberg				http://www.suse.de
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/