Re: What breaks aic7xxx in post 2.6.12-rc2 ?
From: Frank van Maarseveen
Date: Tue Jun 14 2005 - 16:44:11 EST
On Mon, Jun 13, 2005 at 05:59:53PM -0500, James Bottomley wrote:
> On Mon, 2005-06-13 at 23:42 +0200, Frank van Maarseveen wrote:
> > kernel: Vendor: WANGTEK Model: 5525ES SCSI Rev: 73F
> > kernel: Type: Sequential-Access ANSI SCSI
> > revision: 02
> > kernel: target0:0:4: Beginning Domain Validation
> > kernel: target0:0:4: Domain Validation skipping write tests
> > kernel: scsi0:0:4:0: Attempting to queue an ABORT message
>
> The aic7xxx error handling is still very unreconstructed and DV takes
> the driver through this if there's a mismatch. My best guess is that
> like Gr\'egoir's CD-ROM, your wangtek is claiming to support a speed it
> cannot. We find this out in DV, but not until we've gone through all
> the error paths. The quick fix is simply to set the bios to whatever
> the tape eventually configures with (although you'll need the current
> patch set to make that work properly).
Well, I can't seem to find the right collection of patches applying
cleanly on 2.6.12-rc6 and the Adaptec BIOS says "ASYNC". It cannot
go below 10MB/s and the tape unit can't go above 3.3 according to
/proc/scsi/aic7xxx/0 I think:
Target 4 Negotiation Settings
User: 6.600MB/s transfers (16bit)
Goal: 3.300MB/s transfers
Curr: 3.300MB/s transfers
Channel A Target 4 Lun 0 Settings
Commands Queued 61
Commands Active 0
Command Openings 1
Max Tagged Openings 0
Device Queue Frozen Count 0
So, I'm kind of stuck with a very slow driver initialization. I think it
takes much longer than the 30 seconds visible in the logfile, at least
that's the impression I have (I'll use a stopwatch next time).
--
Frank
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/