[1.] One line summary of the problem:When I call "halt", onmy "Toshiba Tecra S2-128", the laptop won't actualy shutdown power. Iguess this is an IRQ or/and ACPI problem.[2.] Full descriptionof the problem/report:Hello, I knew I would have some trouble to makean un-tested laptopto work with GNU/Linux, but hope I recently reachedenough skills totry it. I am totaly new to this mailing list. I know aboutcomputers,but not much about the Linux kernel at all.Here is a summaryof what is working and not working:1-The GNU/Linux console with framebufferis perfectly working.2-The wired network is working only most of the time.But in someconditions, like staring X seem to make it unstable.3-Xorgis not working, almost all the time. Without changing anythingrelatedto the driver or the modules, it sometimes work or don't work.I couldnot figure out what is related to this.4-"acpi_power_off" is not workingeither. At some random times of myinstalls, it did happen to work. Butat each time it worked, at thenext boot, it would not work.I havemade all the "cat" of this mail in the same boot session, justin case.I don't know enough, but I fear some things about IRQ I don'tknow aboutwould behave differrently on one boot or another.I am running withthe latest gentoo kernel. Currently 2.6.11-gentoo-r11I have tried thevanilla sources, but I could not make the framebufferto work with them.I can make other tries if this can help.[3.] Keywords:IRQ,ACPI, Xorg, acpi_power_off, DSDT[4.] Kernel version (from /proc/version):

From: nuage
Date: Wed Jun 29 2005 - 09:06:46 EST

Next message: Markus Törnqvist: "Re: reiser4 plugins"
Previous message: Douglas McNaught: "Re: reiser4 plugins"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

# cat /proc/version
Linux version 2.6.11-gentoo-r11 (root@bird) (gcc
version 3.3.5-20050130 (Gentoo 3.3.5.20050130-r1, ssp-3.3.5.20050130-1, pie-8.7.7.1))
#1 Wed Jun 29 11:57:40 CEST 2005
#

[5.] Output of Oops.. message
(if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt)

(I saw none. Are they reported in dmesg ?)
# dmesg | grep ops
#

[6.] A small shell script or example program which triggers the

problem (if possible)

Sorry, I guess this can only happen on this
new hardware. But send me a patch
and the name of the kernel to try this
on, and I will do it asap.

[7.] Environment

[7.1.]
Software (add the output of the ver_linux script here)

# sh ver_linux

If some fields are empty or look unusual you may have an old version.
Compare
to the current minimal requirements in Documentation/Changes.

Linux
bird 2.6.11-gentoo-r11 #1 Wed Jun 29 11:57:40 CEST 2005 i686 Intel(R) Pentium(R)
M processor 1.73GHz GenuineIntel GNU/Linux

Gnu C 3.3.5-20050130

Gnu make 3.80
binutils 2.15.92.0.2
util-linux
2.12i
mount 2.12i
module-init-tools
3.0
e2fsprogs 1.37
reiserfsprogs 3.6.19
reiser4progs
line
pcmcia-cs 3.2.8
Linux C Library 2.3.4

Dynamic linker (ldd) 2.3.4
Procps 3.2.5
Net-tools
1.60
Kbd 1.12
Sh-utils 5.2.1

udev 056
Modules Loaded snd_pcm_oss snd_mixer_oss
snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_intel8x0 snd_ac97_codec
snd_pcm snd_timer snd soundcore snd_page_alloc nvidia sk98lin
#

[7.2.] Processor information (from /proc/cpuinfo):

# cat /proc/cpuinfo

processor : 0
vendor_id : GenuineIntel
cpu family :
6
model : 13
model name : Intel(R) Pentium(R) M processor
1.73GHz
stepping : 8
cpu MHz : 1729.749
cache size
: 2048 KB
fdiv_bug : no
hlt_bug : no
f00f_bug
: no
coma_bug : no
fpu : yes
fpu_exception
: yes
cpuid level : 2
wp : yes
flags :
fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush
dts acpi mmx fxsr sse sse2 ss tm pbe est tm2
bogomips : 3399.68

#

[7.3.] Module information (from /proc/modules):

# cat /proc/modules

snd_pcm_oss 49056 0 - Live 0xf8de7000
snd_mixer_oss 17920 1 snd_pcm_oss,
Live 0xf8db8000
snd_seq_oss 32960 0 - Live 0xf8d74000
snd_seq_midi_event
6400 1 snd_seq_oss, Live 0xf88fc000
snd_seq 50960 4 snd_seq_oss,snd_seq_midi_event,
Live 0xf8dc9000
snd_seq_device 6924 2 snd_seq_oss,snd_seq, Live 0xf88f2000

snd_intel8x0 29120 0 - Live 0xf8d7e000
snd_ac97_codec 75384 1 snd_intel8x0,
Live 0xf8da4000
snd_pcm 84872 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec,
Live 0xf8d8e000
snd_timer 22084 2 snd_seq,snd_pcm, Live 0xf88f5000
snd
48036 9 snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_seq,snd_seq_device,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer,
Live 0xf8d67000
soundcore 7648 1 snd, Live 0xf88ea000
snd_page_alloc
7684 2 snd_intel8x0,snd_pcm, Live 0xf88e7000
nvidia 3705796 0 - Live 0xf9095000

sk98lin 207000 1 - Live 0xf8c60000
#

[7.4.] Loaded driver and
hardware information (/proc/ioports, /proc/iomem)

# cat /proc/ioports

0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1

0060-006f : keyboard
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df
: dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : libata
0376-0376
: ide1
03c0-03df : vga+
03c0-03df : vesafb
1000-107f : motherboard

1000-1003 : PM1a_EVT_BLK
1004-1005 : PM1a_CNT_BLK
1008-100b : PM_TMR

1010-1015 : ACPI CPU throttle
1020-1020 : PM2_CNT_BLK
1028-102f
: GPE0_BLK
1180-11bf : motherboard
1640-164f : motherboard
1800-181f
: 0000:00:1d.0
1800-181f : uhci_hcd
1820-183f : 0000:00:1d.1
1820-183f
: uhci_hcd
1840-185f : 0000:00:1d.2
1840-185f : uhci_hcd
1860-187f
: 0000:00:1d.3
1860-187f : uhci_hcd
1880-18bf : 0000:00:1e.2
1880-18bf
: Intel ICH
18f0-18ff : 0000:00:1f.2
18f0-18ff : libata
1c00-1cff
: 0000:00:1e.2
1c00-1cff : Intel ICH
2000-207f : 0000:00:1e.3
20a0-20bf
: 0000:00:1f.3
2400-24ff : 0000:00:1e.3
3000-3fff : PCI Bus #02
3000-30ff
: 0000:02:00.0
3000-30ff : sk98lin
fe00-fe7f : motherboard
fe00-fe7f
: pnp 00:00
fe80-feff : motherboard
fe80-feff : pnp 00:00
ff00-ff7f
: motherboard
ff00-ff7f : pnp 00:00
#
# cat /proc/iomem
00000000-0009f7ff
: System RAM
0009f800-0009ffff : reserved
000a0000-000bffff : Video RAM
area
000c0000-000c7fff : Video ROM
000cf800-000d07ff : Adapter ROM

000f0000-000fffff : System ROM
00100000-5fedffff : System RAM
00100000-003c5ea3
: Kernel code
003c5ea4-004ccf7f : Kernel data
5fee0000-5fee9fff : ACPI
Tables
5feea000-5fefffff : ACPI Non-volatile Storage
5ff00000-5fffffff
: reserved
80000000-800003ff : 0000:00:1d.7
80000000-800003ff : ehci_hcd

80000400-800004ff : 0000:00:1e.2
80000400-800004ff : Intel ICH
80000800-800009ff
: 0000:00:1e.2
80000800-800009ff : Intel ICH
90000000-afffffff : PCI
Bus #01
90000000-90ffffff : 0000:01:00.0
a0000000-a3ffffff : 0000:01:00.0

a0000000-a3ffffff : nvidia
b0000000-b3ffffff : PCI Bus #02
b0000000-b0003fff
: 0000:02:00.0
b0000000-b0003fff : sk98lin
b4000000-b4003fff : 0000:06:04.2

b4004000-b4005fff : 0000:06:04.3
b4006000-b4006fff : 0000:06:02.0
b4007000-b4007fff
: 0000:06:04.0
b4008000-b4008fff : 0000:06:04.1
b4009000-b40097ff : 0000:06:04.2

b4009000-b40097ff : ohci1394
b4009800-b40098ff : 0000:06:04.4
b4009c00-b4009cff
: 0000:06:04.4
b400a000-b400a0ff : 0000:06:04.4
c0000000-cfffffff : PCI
Bus #01
c0000000-c7ffffff : 0000:01:00.0
c0000000-c3ffffff : vesafb

d0000000-d3ffffff : PCI Bus #02
e0000000-f0005fff : reserved
f0008000-f000bfff
: reserved
fed20000-fed8ffff : reserved
ff000000-ffffffff : reserved

#

[7.5.] PCI information ('lspci -vvv' as root)

bird scripts
# lspci -vvv
0000:00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML
Express Processor to DRAM Controller (rev 03)
Subsystem: Toshiba
America Info Systems: Unknown device ff00
Control: I/O- Mem+ BusMaster+
SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-

Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+
>SERR- <PERR-
Latency: 0
Capabilities: [e0] #09 [2109]

0000:00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI
Express Root Port (rev 03) (prog-if 00 [Normal decode])
Control:
I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-
FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, cache line
size 08
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0

I/O behind bridge: 0000f000-00000fff
Memory behind bridge:
90000000-afffffff
Prefetchable memory behind bridge: c0000000-cfffffff

BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-

Capabilities: [88] #0d [0000]
Capabilities: [80] Power Management
version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities:
[90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-

Address: 00000000 Data: 0000
Capabilities: [a0] #10 [0141]

0000:00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode])

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, cache line
size 08
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0

I/O behind bridge: 00003000-00003fff
Memory behind bridge:
b0000000-b3ffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d3f00000

Expansion ROM at 00003000 [disabled] [size=4K]
BridgeCtl:
Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities:
[40] #10 [0141]
Capabilities: [80] Message Signalled Interrupts:
64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000

Capabilities: [90] #0d [0000]
Capabilities: [a0] Power
Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable-
DSel=0 DScale=0 PME-

0000:00:1d.0 USB Controller: Intel Corporation
82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) (prog-if 00 [UHCI])

Subsystem: Toshiba America Info Systems: Unknown device ff00

Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency:
0
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports
at 1800 [size=32]

0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW
(ICH6 Family) USB UHCI #2 (rev 03) (prog-if 00 [UHCI])
Subsystem:
Toshiba America Info Systems: Unknown device ff00
Control: I/O+
Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt:
pin B routed to IRQ 11
Region 4: I/O ports at 1820 [size=32]

0000:00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba
America Info Systems: Unknown device ff00
Control: I/O+ Mem- BusMaster+
SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed
to IRQ 10
Region 4: I/O ports at 1840 [size=32]

0000:00:1d.3
USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB
UHCI #4 (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba America
Info Systems: Unknown device ff00
Control: I/O+ Mem- BusMaster+
SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed
to IRQ 10
Region 4: I/O ports at 1860 [size=32]

0000:00:1d.7
USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2
EHCI Controller (rev 03) (prog-if 20 [EHCI])
Subsystem: Toshiba
America Info Systems: Unknown device ff00
Control: I/O- Mem+ BusMaster+
SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed
to IRQ 11
Region 0: Memory at 80000000 (32-bit, non-prefetchable)

Capabilities: [50] Power Management version 2
Flags:
PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities:
[58] #0a [20a0]

0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile
PCI Bridge (rev d3) (prog-if 01 [Subtractive decode])
Control:
I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+
FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus:
primary=00, secondary=06, subordinate=08, sec-latency=216
I/O behind
bridge: 0000f000-00000fff
Memory behind bridge: b4000000-b40fffff

Prefetchable memory behind bridge: 00000000fff00000-0000000000000000

BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-

Capabilities: [50] #0d [0000]

0000:00:1e.2 Multimedia audio controller:
Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller
(rev 03)
Subsystem: Toshiba America Info Systems: Unknown device
ff00
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+
ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0:
I/O ports at 1c00
Region 1: I/O ports at 1880 [size=64]

Region 2: Memory at 80000800 (32-bit, non-prefetchable) [size=512]

Region 3: Memory at 80000400 (32-bit, non-prefetchable) [size=256]

Capabilities: [50] Power Management version 2
Flags:
PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:1e.3
Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem
Controller (rev 03) (prog-if 00 [Generic])
Subsystem: Toshiba America
Info Systems: Unknown device 0001
Control: I/O+ Mem- BusMaster-
SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 10

Region 0: I/O ports at 2400
Region 1: I/O ports at 2000 [size=128]

Capabilities: [50] Power Management version 2
Flags:
PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:1f.0
ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev
03)
Subsystem: Toshiba America Info Systems: Unknown device ff00

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency:
0

0000:00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA
Controller (rev 03) (prog-if 80 [Master])
Subsystem: Toshiba America
Info Systems: Unknown device ff00
Control: I/O+ Mem- BusMaster+
SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed
to IRQ 11
Region 0: I/O ports at <unassigned>
Region
1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>

Region 3: I/O ports at <unassigned>
Region 4: I/O ports
at 18f0 [size=16]
Capabilities: [70] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)

Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:1f.3
SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller
(rev 03)
Subsystem: Toshiba America Info Systems: Unknown device
ff00
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+
ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 20a0 [size=32]

0000:01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce
Go 6600] (rev a2) (prog-if 00 [VGA])
Subsystem: Toshiba America
Info Systems: Unknown device ff00
Control: I/O+ Mem+ BusMaster+
SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort-
>SERR- <PERR-
Latency: 0, cache line size 08
Interrupt:
pin A routed to IRQ 10
Region 0: Memory at a0000000 (32-bit, non-prefetchable)

Region 1: Memory at c0000000 (64-bit, prefetchable) [size=128M]

Region 3: Memory at 90000000 (64-bit, non-prefetchable) [size=16M]

Capabilities: [60] Power Management version 2
Flags:
PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)

Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities:
[68] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-

Address: 0000000000000000 Data: 0000
Capabilities: [78] #10
[0001]

0000:02:00.0 Ethernet controller: Marvell Technology Group Ltd.
88E8053 Gigabit Ethernet Controller (rev 15)
Subsystem: Toshiba
America Info Systems Marvell 88E8053 Gigabit Ethernet Controller (Compal)

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr-
DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR-
Latency: 0,
cache line size 08
Interrupt: pin A routed to IRQ 10

Region 0: Memory at b0000000 (64-bit, non-prefetchable)
Region
2: I/O ports at 3000 [size=256]
Capabilities: [48] Power Management
version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)

Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities:
[50] Vital Product Data
Capabilities: [5c] Message Signalled Interrupts:
64bit+ Queue=0/1 Enable-
Address: 0000000000000000 Data:
0000
Capabilities: [e0] #10 [0011]

0000:06:02.0 Network controller:
Intel Corporation PRO/Wireless 2200BG (rev 05)
Subsystem: Intel
Corporation: Unknown device 2741
Control: I/O- Mem+ BusMaster+
SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (750ns min, 6000ns max), cache
line size 08
Interrupt: pin A routed to IRQ 11
Region
0: Memory at b4006000 (32-bit, non-prefetchable)
Capabilities:
[dc] Power Management version 2
Flags: PMEClk- DSI+ D1-
D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status:
D0 PME-Enable- DSel=0 DScale=1 PME-

0000:06:04.0 CardBus bridge: Texas
Instruments Texas Instruments PCIxx21/x515 Cardbus Controller
Subsystem:
Toshiba America Info Systems: Unknown device ff00
Control: I/O+
Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, cache line size 08

Interrupt: pin A routed to IRQ 10
Region 0: Memory at b4007000
(32-bit, non-prefetchable)
Bus: primary=06, secondary=07, subordinate=0a,
sec-latency=176
Memory window 0: 00000000-00000000 (prefetchable)

Memory window 1: 00000000-00000000 (prefetchable)
I/O window
0: 00000000-00000003
I/O window 1: 00000000-00000003

BridgeCtl: Parity- SERR- ISA+ VGA- MAbort- >Reset+ 16bInt- PostWrite-

16-bit legacy interface ports at 0001

0000:06:04.1 CardBus bridge:
Texas Instruments Texas Instruments PCIxx21/x515 Cardbus Controller

Subsystem: Toshiba America Info Systems: Unknown device ff00

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, cache line
size 08
Interrupt: pin B routed to IRQ 10
Region 0: Memory
at b4008000 (32-bit, non-prefetchable)
Bus: primary=06, secondary=0b,
subordinate=0e, sec-latency=176
Memory window 0: fff00000-000ff000
(prefetchable)
Memory window 1: 00000000-00000000 (prefetchable)

I/O window 0: 0000f000-00000fff
I/O window 1: 00000000-00000003

BridgeCtl: Parity- SERR- ISA+ VGA- MAbort- >Reset+ 16bInt- PostWrite-

16-bit legacy interface ports at 0001

0000:06:04.2 FireWire
(IEEE 1394): Texas Instruments Texas Instruments OHCI Compliant IEEE 1394
Host Controller (prog-if 10 [OHCI])
Subsystem: Toshiba America
Info Systems: Unknown device ff00
Control: I/O- Mem+ BusMaster+
SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 1000ns max), cache
line size 08
Interrupt: pin C routed to IRQ 10
Region
0: Memory at b4009000 (32-bit, non-prefetchable)
Region 1: Memory
at b4000000 (32-bit, non-prefetchable) [size=16K]
Capabilities:
[44] Power Management version 2
Flags: PMEClk- DSI- D1+
D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status:
D0 PME-Enable- DSel=0 DScale=0 PME+

0000:06:04.3 Unknown mass storage
controller: Texas Instruments Texas Instruments PCIxx21 Integrated FlashMedia
Controller
Subsystem: Toshiba America Info Systems: Unknown device
ff01
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B-
ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 57 (1750ns min, 1000ns max), cache line size 08
Interrupt:
pin B routed to IRQ 10
Region 0: Memory at b4004000 (32-bit, non-prefetchable)

Capabilities: [44] Power Management version 2
Flags:
PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)

Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:06:04.4
Class 0805: Texas Instruments Texas Instruments PCI6411, PCI6421, PCI6611,
PCI6621, PCI7411, PCI7421, PCI7611, PCI7621 Secure Digital (SD)

Subsystem: Toshiba America Info Systems: Unknown device ff01
Control:
I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-
FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 57 (1750ns min,
1000ns max), cache line size 08
Interrupt: pin D routed to IRQ
10
Region 0: Memory at b400a000 (32-bit, non-prefetchable)

Region 1: Memory at b4009c00 (32-bit, non-prefetchable) [size=256]

Region 2: Memory at b4009800 (32-bit, non-prefetchable) [size=256]

Capabilities: [80] Power Management version 2
Flags:
PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)

Status: D0 PME-Enable- DSel=0 DScale=0 PME-
#

[7.6.]
SCSI information (from /proc/scsi/scsi)

# cat /proc/scsi/scsi
Attached
devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model:
TOSHIBA MK8025GA Rev: KA02
Type: Direct-Access ANSI
SCSI revision: 05
#

[7.7.] Other information that might be relevant
to the problem
(please look in /proc and include all information
that you
think to be relevant):

Here is one test that may be
revealant:
starting X and watching the ACPI messages of dmesg:

# X
&> x.out.txt
Message from syslogd@bird at Wed Jun 29 15:28:13 2005 ...

bird kernel: Disabling IRQ #10
----------here network stoped to work

#dmesg > dmesg.txt
#halt
----------[...everything else is halting fine]

acpi_power_off called
----------the laptop is still on, I reboot it manualy.

#cat dmesg.txt
oad: enabled
scatter-gather: enabled
tx-checksum:
enabled
rx-checksum: enabled
rx-polling: enabled

eth0: network connection down
eth0: network connection up using port A

speed: 100
autonegotiation: yes
duplex mode:
full
flowctrl: symmetric
irq moderation: disabled

tcp offload: enabled
scatter-gather: enabled
tx-checksum:
enabled
rx-checksum: enabled
rx-polling: enabled

eth0: network connection down
eth0: network connection up using port A

speed: 100
autonegotiation: yes
duplex mode:
full
flowctrl: symmetric
irq moderation: disabled

tcp offload: enabled
scatter-gather: enabled
tx-checksum:
enabled
rx-checksum: enabled
rx-polling: enabled

eth0: network connection down
eth0: network connection up using port A

speed: 100
autonegotiation: yes
duplex mode:
full
flowctrl: symmetric
irq moderation: disabled

tcp offload: enabled
scatter-gather: enabled
tx-checksum:
enabled
rx-checksum: enabled
rx-polling: enabled

eth0: network connection down
eth0: network connection up using port A

speed: 100
autonegotiation: yes
duplex mode:
full
flowctrl: symmetric
irq moderation: disabled

tcp offload: enabled
scatter-gather: enabled
tx-checksum:
enabled
rx-checksum: enabled
rx-polling: enabled

eth0: network connection down
eth0: network connection up using port A

speed: 100
autonegotiation: yes
duplex mode:
full
flowctrl: symmetric
irq moderation: disabled

tcp offload: enabled
scatter-gather: enabled
tx-checksum:
enabled
rx-checksum: enabled
rx-polling: enabled

eth0: network connection down
eth0: network connection up using port A

speed: 100
autonegotiation: yes
duplex mode:
full
flowctrl: symmetric
irq moderation: disabled

tcp offload: enabled
scatter-gather: enabled
tx-checksum:
enabled
rx-checksum: enabled
rx-polling: enabled

eth0: network connection down
eth0: network connection up using port A

speed: 100
autonegotiation: yes
duplex mode:
full
flowctrl: symmetric
irq moderation: disabled

tcp offload: enabled
scatter-gather: enabled
tx-checksum:
enabled
rx-checksum: enabled
rx-polling: enabled

eth0: network connection down
eth0: network connection up using port A

speed: 100
autonegotiation: yes
duplex mode:
full
flowctrl: symmetric
irq moderation: disabled

tcp offload: enabled
scatter-gather: enabled
tx-checksum:
enabled
rx-checksum: enabled
rx-polling: enabled

eth0: network connection down
eth0: network connection up using port A

speed: 100
autonegotiation: yes
duplex mode:
full
flowctrl: symmetric
irq moderation: disabled

tcp offload: enabled
scatter-gather: enabled
tx-checksum:
enabled
rx-checksum: enabled
rx-polling: enabled

eth0: network connection down
eth0: network connection up using port A

speed: 100
autonegotiation: yes
duplex mode:
full
flowctrl: symmetric
irq moderation: disabled

tcp offload: enabled
scatter-gather: enabled
tx-checksum:
enabled
rx-checksum: enabled
rx-polling: enabled

eth0: network connection down
eth0: network connection up using port A

speed: 100
autonegotiation: yes
duplex mode:
full
flowctrl: symmetric
irq moderation: disabled

tcp offload: enabled
scatter-gather: enabled
tx-checksum:
enabled
rx-checksum: enabled
rx-polling: enabled

eth0: network connection down
eth0: network connection up using port A

speed: 100
autonegotiation: yes
duplex mode:
full
flowctrl: symmetric
irq moderation: disabled

tcp offload: enabled
scatter-gather: enabled
tx-checksum:
enabled
rx-checksum: enabled
rx-polling: enabled

eth0: network connection down
eth0: network connection up using port A

speed: 100
autonegotiation: yes
duplex mode:
full
flowctrl: symmetric
irq moderation: disabled

tcp offload: enabled
scatter-gather: enabled
tx-checksum:
enabled
rx-checksum: enabled
rx-polling: enabled

eth0: network connection down
eth0: network connection up using port A

speed: 100
autonegotiation: yes
duplex mode:
full
flowctrl: symmetric
irq moderation: disabled

tcp offload: enabled
scatter-gather: enabled
tx-checksum:
enabled
rx-checksum: enabled
rx-polling: enabled

eth0: network connection down
eth0: network connection up using port A

speed: 100
autonegotiation: yes
duplex mode:
full
flowctrl: symmetric
irq moderation: disabled

tcp offload: enabled
scatter-gather: enabled
tx-checksum:
enabled
rx-checksum: enabled
rx-polling: enabled

eth0: network connection down
eth0: network connection up using port A

speed: 100
autonegotiation: yes
duplex mode:
full
flowctrl: symmetric
irq moderation: disabled

tcp offload: enabled
scatter-gather: enabled
tx-checksum:
enabled
rx-checksum: enabled
rx-polling: enabled

eth0: network connection up using port A
speed: 100

autonegotiation: yes
duplex mode: full
flowctrl:
symmetric
irq moderation: disabled
tcp offload: enabled

scatter-gather: enabled
tx-checksum: enabled
rx-checksum:
enabled
rx-polling: enabled
eth0: network connection down

eth0: network connection up using port A
speed: 100

autonegotiation: yes
duplex mode: full
flowctrl:
symmetric
irq moderation: disabled
tcp offload: enabled

scatter-gather: enabled
tx-checksum: enabled
rx-checksum:
enabled
rx-polling: enabled
eth0: network connection up
using port A
speed: 100
autonegotiation: yes

duplex mode: full
flowctrl: symmetric
irq moderation:
disabled
tcp offload: enabled
scatter-gather: enabled

tx-checksum: enabled
rx-checksum: enabled
rx-polling:
enabled
eth0: network connection down
eth0: network connection up
using port A
speed: 100
autonegotiation: yes

duplex mode: full
flowctrl: symmetric
irq moderation:
disabled
tcp offload: enabled
scatter-gather: enabled

tx-checksum: enabled
rx-checksum: enabled
rx-polling:
enabled
eth0: network connection down
eth0: network connection up
using port A
speed: 100
autonegotiation: yes

duplex mode: full
flowctrl: symmetric
irq moderation:
disabled
tcp offload: enabled
scatter-gather: enabled

tx-checksum: enabled
rx-checksum: enabled
rx-polling:
enabled
eth0: network connection down
eth0: network connection up
using port A
speed: 100
autonegotiation: yes

duplex mode: full
flowctrl: symmetric
irq moderation:
disabled
tcp offload: enabled
scatter-gather: enabled

tx-checksum: enabled
rx-checksum: enabled
rx-polling:
enabled
eth0: network connection down
eth0: network connection up
using port A
speed: 100
autonegotiation: yes

duplex mode: full
flowctrl: symmetric
irq moderation:
disabled
tcp offload: enabled
scatter-gather: enabled

tx-checksum: enabled
rx-checksum: enabled
rx-polling:
enabled
eth0: network connection down
eth0: network connection up
using port A
speed: 100
autonegotiation: yes

duplex mode: full
flowctrl: symmetric
irq moderation:
disabled
tcp offload: enabled
scatter-gather: enabled

tx-checksum: enabled
rx-checksum: enabled
rx-polling:
enabled
eth0: network connection down
eth0: network connection up
using port A
speed: 100
autonegotiation: yes

duplex mode: full
flowctrl: symmetric
irq moderation:
disabled
tcp offload: enabled
scatter-gather: enabled

tx-checksum: enabled
rx-checksum: enabled
rx-polling:
enabled
eth0: network connection down
eth0: network connection up
using port A
speed: 100
autonegotiation: yes

duplex mode: full
flowctrl: symmetric
irq moderation:
disabled
tcp offload: enabled
scatter-gather: enabled

tx-checksum: enabled
rx-checksum: enabled
rx-polling:
enabled
eth0: network connection down
eth0: network connection up
using port A
speed: 100
autonegotiation: yes

duplex mode: full
flowctrl: symmetric
irq moderation:
disabled
tcp offload: enabled
scatter-gather: enabled

tx-checksum: enabled
rx-checksum: enabled
rx-polling:
enabled
eth0: network connection down
eth0: network connection up
using port A
speed: 100
autonegotiation: yes

duplex mode: full
flowctrl: symmetric
irq moderation:
disabled
tcp offload: enabled
scatter-gather: enabled

tx-checksum: enabled
rx-checksum: enabled
rx-polling:
enabled
eth0: network connection down
eth0: network connection up
using port A
speed: 100
autonegotiation: yes

duplex mode: full
flowctrl: symmetric
irq moderation:
disabled
tcp offload: enabled
scatter-gather: enabled

tx-checksum: enabled
rx-checksum: enabled
rx-polling:
enabled
eth0: network connection down
eth0: network connection up
using port A
speed: 100
autonegotiation: yes

duplex mode: full
flowctrl: symmetric
irq moderation:
disabled
tcp offload: enabled
scatter-gather: enabled

tx-checksum: enabled
rx-checksum: enabled
rx-polling:
enabled
eth0: network connection down
eth0: network connection up
using port A
speed: 100
autonegotiation: yes

duplex mode: full
flowctrl: symmetric
irq moderation:
disabled
tcp offload: enabled
scatter-gather: enabled

tx-checksum: enabled
rx-checksum: enabled
rx-polling:
enabled
eth0: network connection down
eth0: network connection up
using port A
speed: 100
autonegotiation: yes

duplex mode: full
flowctrl: symmetric
irq moderation:
disabled
tcp offload: enabled
scatter-gather: enabled

tx-checksum: enabled
rx-checksum: enabled
rx-polling:
enabled
eth0: network connection down
eth0: network connection up
using port A
speed: 100
autonegotiation: yes

duplex mode: full
flowctrl: symmetric
irq moderation:
disabled
tcp offload: enabled
scatter-gather: enabled

tx-checksum: enabled
rx-checksum: enabled
rx-polling:
enabled
eth0: network connection down
eth0: network connection up
using port A
speed: 100
autonegotiation: yes

duplex mode: full
flowctrl: symmetric
irq moderation:
disabled
tcp offload: enabled
scatter-gather: enabled

tx-checksum: enabled
rx-checksum: enabled
rx-polling:
enabled
eth0: network connection down
eth0: network connection up
using port A
speed: 100
autonegotiation: yes

duplex mode: full
flowctrl: symmetric
irq moderation:
disabled
tcp offload: enabled
scatter-gather: enabled

tx-checksum: enabled
rx-checksum: enabled
rx-polling:
enabled
eth0: network connection down
eth0: network connection up
using port A
speed: 100
autonegotiation: yes

duplex mode: full
flowctrl: symmetric
irq moderation:
disabled
tcp offload: enabled
scatter-gather: enabled

tx-checksum: enabled
rx-checksum: enabled
rx-polling:
enabled
eth0: network connection down
eth0: network connection up
using port A
speed: 100
autonegotiation: yes

duplex mode: full
flowctrl: symmetric
irq moderation:
disabled
tcp offload: enabled
scatter-gather: enabled

tx-checksum: enabled
rx-checksum: enabled
rx-polling:
enabled
eth0: network connection down
eth0: network connection up
using port A
speed: 100
autonegotiation: yes

duplex mode: full
flowctrl: symmetric
irq moderation:
disabled
tcp offload: enabled
scatter-gather: enabled

tx-checksum: enabled
rx-checksum: enabled
rx-polling:
enabled
eth0: network connection down
eth0: network connection up
using port A
speed: 100
autonegotiation: yes

duplex mode: full
flowctrl: symmetric
irq moderation:
disabled
tcp offload: enabled
scatter-gather: enabled

tx-checksum: enabled
rx-checksum: enabled
rx-polling:
enabled
irq 10: nobody cared!
[<c01362da>] __report_bad_irq+0x2a/0xa0

[<c0135c00>] handle_IRQ_event+0x30/0x70
[<c01363e0>] note_interrupt+0x70/0xb0

[<c0135d85>] __do_IRQ+0x145/0x160
[<c0104d77>] do_IRQ+0x47/0x70
=======================

[<c010333e>] common_interrupt+0x1a/0x20
[<c011babe>] __do_softirq+0x2e/0x90

[<c0104e81>] do_softirq+0x41/0x50
=======================
[<c011bbe5>]
irq_exit+0x35/0x40
[<c0104d7e>] do_IRQ+0x4e/0x70
[<c010333e>] common_interrupt+0x1a/0x20

[<f92b007b>] _nv000166rm+0x1f3/0x314 [nvidia]
[<c018dd76>] proc_kill_inodes+0x16/0xf0

[<c018e2af>] remove_proc_entry+0x8f/0x150
[<c0136196>] free_irq+0xb6/0x130

[<f92b73b2>] nv_kern_close+0xb3/0x130 [nvidia]
[<c01584ae>] __fput+0x17e/0x190

[<c0156909>] filp_close+0x59/0x90
[<c01569ab>] sys_close+0x6b/0xa0

[<c01031cf>] syscall_call+0x7/0xb
handlers:
[<c0311220>] (ohci_irq_handler+0x0/0x7e0)

[<c0323590>] (usb_hcd_irq+0x0/0x70)
[<c0323590>] (usb_hcd_irq+0x0/0x70)

[<f8c67c80>] (SkY2Isr+0x0/0x270 [sk98lin])
Disabling IRQ #10
NVRM: rm_init_adapter(0)
failed
# cat x.out.txt
_XSERVTransSocketOpenCOTSServer: Unable to open
socket for inet6
_XSERVTransOpen: transport open failed for inet6/bird:0

_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6

X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol
Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.11-gentoo-r3
i686 [ELF]
Current Operating System: Linux bird 2.6.11-gentoo-r11 #1 Wed
Jun 29 11:57:40 CEST 2005 i686
Build Date: 10 June 2005
Before
reporting problems, check http://wiki.X.Org
to make sure that you
have the latest version.
Module Loader present
Markers: (--) probed,
(**) from config file, (==) default setting,
(++) from command
line, (!!) notice, (II) informational,
(WW) warning, (EE) error,
(NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log",
Time: Wed Jun 29 15:28:08 2005
(==) Using config file: "/etc/X11/xorg.conf"

Using vt 7
NVIDIA: could not open the device file /dev/nvidia0 (Input/output
error).
(EE) NVIDIA(0): The NVIDIA kernel module does not appear to be
receiving
(EE) NVIDIA(0): interrupts generated by the NVIDIA graphics
device.
(EE) NVIDIA(0): Please see the FREQUENTLY ASKED QUESTIONS
section in the
(EE) NVIDIA(0): README for additional information.

(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
(EE) NVIDIA(0):
*** Aborting ***

Fatal server error:
AddScreen/ScreenInit failed
for driver 0

Please consult the The X.Org Foundation support

at http://wiki.X.Org
for help.
Please also check the log file
at "/var/log/Xorg.0.log" for additional information.
#

[X.] Other
notes, patches, fixes, workarounds:

Note: This kernel has been patched
with:
1-My own "fixed" DSDT, as an attempt to make it work.
http://www.kotarkh.ch/linux/dsdt-before-fix.dsl

http://www.kotarkh.ch/linux/dsdt-after-fix.dsl
2-The latest dsk9elin module.
Network would not work without it.
PROBLEM: new hardware problems: possibly
IRQ and ACPI (Toshiba Tecra S2-128)
X-Enigmail-Version: 0.91.0.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

[1.] One line summary of the problem:

When I call "halt", on my "Toshiba Tecra S2-128", the laptop won't
actualy shutdown power, but only end up with the last line displaying:
"acpi_power_off". I *guess* this is an IRQ or/and ACPI problem.

[2.] Full description of the problem/report:

Hello, I knew I would have some trouble to make an un-tested laptop
to work with GNU/Linux, but hope I recently reached enough skills to
try it. I am totaly new to this mailing list. I know about computers,
but not much about the Linux kernel at all.

Here is a summary of what is working and not working:
1-The GNU/Linux console with framebuffer is perfectly working.
2-The wired network is working only most of the time. But in some
conditions, like staring X seem to make it unstable.
3-Xorg is not working, almost all the time. Without changing anything
related to the driver or the modules, it sometimes work or don't work.
I could not figure out what is related to this.
4-"acpi_power_off" is not working either. At some random times of my
installs, it did happen to work. But at each time it worked, at the
next boot, it would not work.

I have made all the "cat" of this mail in the same boot session, just
in case. I don't know enough, but I fear some things about IRQ I don't
know about would behave differrently on one boot or another.

I am running with the latest gentoo kernel. Currently 2.6.11-gentoo-r11
I have tried the vanilla sources, but I could not make the framebuffer
to work with them. I can make other tries if this can help.

[3.] Keywords:

IRQ, ACPI, Xorg, acpi_power_off, DSDT

[4.] Kernel version (from /proc/version):

# cat /proc/version
Linux version 2.6.11-gentoo-r11 (root@bird) (gcc version 3.3.5-20050130 (Gentoo 3.3.5.20050130-r1, ssp-3.3.5.20050130-1, pie-8.7.7.1)) #1 Wed Jun 29
11:57:40 CEST 2005
#

[5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt)

(I saw none. Are they reported in dmesg ?)
# dmesg | grep ops
#

[6.] A small shell script or example program which triggers the
problem (if possible)

Sorry, I guess this can only happen on this new hardware. But send me a patch
and the name of the kernel to try this on, and I will do it asap.

[7.] Environment

[7.1.] Software (add the output of the ver_linux script here)

# sh ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.

Linux bird 2.6.11-gentoo-r11 #1 Wed Jun 29 11:57:40 CEST 2005 i686 Intel(R) Pentium(R) M processor 1.73GHz GenuineIntel GNU/Linux

Gnu C 3.3.5-20050130
Gnu make 3.80
binutils 2.15.92.0.2
util-linux 2.12i
mount 2.12i
module-init-tools 3.0
e2fsprogs 1.37
reiserfsprogs 3.6.19
reiser4progs line
pcmcia-cs 3.2.8
Linux C Library 2.3.4
Dynamic linker (ldd) 2.3.4
Procps 3.2.5
Net-tools 1.60
Kbd 1.12
Sh-utils 5.2.1
udev 056
Modules Loaded snd_pcm_oss snd_mixer_oss snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_intel8x0 snd_ac97_codec snd_pcm snd_timer
snd soundcore snd_page_alloc nvidia sk98lin
#

[7.2.] Processor information (from /proc/cpuinfo):

# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 13
model name : Intel(R) Pentium(R) M processor 1.73GHz
stepping : 8
cpu MHz : 1729.749
cache size : 2048 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss tm pbe est tm2
bogomips : 3399.68
#

[7.3.] Module information (from /proc/modules):

# cat /proc/modules
snd_pcm_oss 49056 0 - Live 0xf8de7000
snd_mixer_oss 17920 1 snd_pcm_oss, Live 0xf8db8000
snd_seq_oss 32960 0 - Live 0xf8d74000
snd_seq_midi_event 6400 1 snd_seq_oss, Live 0xf88fc000
snd_seq 50960 4 snd_seq_oss,snd_seq_midi_event, Live 0xf8dc9000
snd_seq_device 6924 2 snd_seq_oss,snd_seq, Live 0xf88f2000
snd_intel8x0 29120 0 - Live 0xf8d7e000
snd_ac97_codec 75384 1 snd_intel8x0, Live 0xf8da4000
snd_pcm 84872 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec, Live 0xf8d8e000
snd_timer 22084 2 snd_seq,snd_pcm, Live 0xf88f5000
snd 48036 9 snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_seq,snd_seq_device,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer, Live 0xf8d67000
soundcore 7648 1 snd, Live 0xf88ea000
snd_page_alloc 7684 2 snd_intel8x0,snd_pcm, Live 0xf88e7000
nvidia 3705796 0 - Live 0xf9095000
sk98lin 207000 1 - Live 0xf8c60000
#

[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)

# cat /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : libata
0376-0376 : ide1
03c0-03df : vga+
03c0-03df : vesafb
1000-107f : motherboard
1000-1003 : PM1a_EVT_BLK
1004-1005 : PM1a_CNT_BLK
1008-100b : PM_TMR
1010-1015 : ACPI CPU throttle
1020-1020 : PM2_CNT_BLK
1028-102f : GPE0_BLK
1180-11bf : motherboard
1640-164f : motherboard
1800-181f : 0000:00:1d.0
1800-181f : uhci_hcd
1820-183f : 0000:00:1d.1
1820-183f : uhci_hcd
1840-185f : 0000:00:1d.2
1840-185f : uhci_hcd
1860-187f : 0000:00:1d.3
1860-187f : uhci_hcd
1880-18bf : 0000:00:1e.2
1880-18bf : Intel ICH
18f0-18ff : 0000:00:1f.2
18f0-18ff : libata
1c00-1cff : 0000:00:1e.2
1c00-1cff : Intel ICH
2000-207f : 0000:00:1e.3
20a0-20bf : 0000:00:1f.3
2400-24ff : 0000:00:1e.3
3000-3fff : PCI Bus #02
3000-30ff : 0000:02:00.0
3000-30ff : sk98lin
fe00-fe7f : motherboard
fe00-fe7f : pnp 00:00
fe80-feff : motherboard
fe80-feff : pnp 00:00
ff00-ff7f : motherboard
ff00-ff7f : pnp 00:00
#
# cat /proc/iomem
00000000-0009f7ff : System RAM
0009f800-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000cf800-000d07ff : Adapter ROM
000f0000-000fffff : System ROM
00100000-5fedffff : System RAM
00100000-003c5ea3 : Kernel code
003c5ea4-004ccf7f : Kernel data
5fee0000-5fee9fff : ACPI Tables
5feea000-5fefffff : ACPI Non-volatile Storage
5ff00000-5fffffff : reserved
80000000-800003ff : 0000:00:1d.7
80000000-800003ff : ehci_hcd
80000400-800004ff : 0000:00:1e.2
80000400-800004ff : Intel ICH
80000800-800009ff : 0000:00:1e.2
80000800-800009ff : Intel ICH
90000000-afffffff : PCI Bus #01
90000000-90ffffff : 0000:01:00.0
a0000000-a3ffffff : 0000:01:00.0
a0000000-a3ffffff : nvidia
b0000000-b3ffffff : PCI Bus #02
b0000000-b0003fff : 0000:02:00.0
b0000000-b0003fff : sk98lin
b4000000-b4003fff : 0000:06:04.2
b4004000-b4005fff : 0000:06:04.3
b4006000-b4006fff : 0000:06:02.0
b4007000-b4007fff : 0000:06:04.0
b4008000-b4008fff : 0000:06:04.1
b4009000-b40097ff : 0000:06:04.2
b4009000-b40097ff : ohci1394
b4009800-b40098ff : 0000:06:04.4
b4009c00-b4009cff : 0000:06:04.4
b400a000-b400a0ff : 0000:06:04.4
c0000000-cfffffff : PCI Bus #01
c0000000-c7ffffff : 0000:01:00.0
c0000000-c3ffffff : vesafb
d0000000-d3ffffff : PCI Bus #02
e0000000-f0005fff : reserved
f0008000-f000bfff : reserved
fed20000-fed8ffff : reserved
ff000000-ffffffff : reserved
#

[7.5.] PCI information ('lspci -vvv' as root)

bird scripts # lspci -vvv
0000:00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
Subsystem: Toshiba America Info Systems: Unknown device ff00
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Capabilities: [e0] #09 [2109]

0000:00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, cache line size 08
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: 90000000-afffffff
Prefetchable memory behind bridge: c0000000-cfffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: [88] #0d [0000]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [a0] #10 [0141]

0000:00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, cache line size 08
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: b0000000-b3ffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d3f00000
Expansion ROM at 00003000 [disabled] [size=4K]
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] #10 [0141]
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems: Unknown device ff00
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at 1800 [size=32]

0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems: Unknown device ff00
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 1820 [size=32]

0000:00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems: Unknown device ff00
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 10
Region 4: I/O ports at 1840 [size=32]

0000:00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems: Unknown device ff00
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at 1860 [size=32]

0000:00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI])
Subsystem: Toshiba America Info Systems: Unknown device ff00
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 80000000 (32-bit, non-prefetchable)
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] #0a [20a0]

0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=06, subordinate=08, sec-latency=216
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: b4000000-b40fffff
Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] #0d [0000]

0000:00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
Subsystem: Toshiba America Info Systems: Unknown device ff00
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 1c00
Region 1: I/O ports at 1880 [size=64]
Region 2: Memory at 80000800 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at 80000400 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03) (prog-if 00 [Generic])
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 10
Region 0: I/O ports at 2400
Region 1: I/O ports at 2000 [size=128]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
Subsystem: Toshiba America Info Systems: Unknown device ff00
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0

0000:00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03) (prog-if 80 [Master])
Subsystem: Toshiba America Info Systems: Unknown device ff00
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at 18f0 [size=16]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
Subsystem: Toshiba America Info Systems: Unknown device ff00
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 20a0 [size=32]

0000:01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce Go 6600] (rev a2) (prog-if 00 [VGA])
Subsystem: Toshiba America Info Systems: Unknown device ff00
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: Memory at a0000000 (32-bit, non-prefetchable)
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=128M]
Region 3: Memory at 90000000 (64-bit, non-prefetchable) [size=16M]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [78] #10 [0001]

0000:02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 Gigabit Ethernet Controller (rev 15)
Subsystem: Toshiba America Info Systems Marvell 88E8053 Gigabit Ethernet Controller (Compal)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR-
Latency: 0, cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: Memory at b0000000 (64-bit, non-prefetchable)
Region 2: I/O ports at 3000 [size=256]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [e0] #10 [0011]

0000:06:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG (rev 05)
Subsystem: Intel Corporation: Unknown device 2741
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (750ns min, 6000ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at b4006000 (32-bit, non-prefetchable)
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-

0000:06:04.0 CardBus bridge: Texas Instruments Texas Instruments PCIxx21/x515 Cardbus Controller
Subsystem: Toshiba America Info Systems: Unknown device ff00
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: Memory at b4007000 (32-bit, non-prefetchable)
Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176
Memory window 0: 00000000-00000000 (prefetchable)
Memory window 1: 00000000-00000000 (prefetchable)
I/O window 0: 00000000-00000003
I/O window 1: 00000000-00000003
BridgeCtl: Parity- SERR- ISA+ VGA- MAbort- >Reset+ 16bInt- PostWrite-
16-bit legacy interface ports at 0001

0000:06:04.1 CardBus bridge: Texas Instruments Texas Instruments PCIxx21/x515 Cardbus Controller
Subsystem: Toshiba America Info Systems: Unknown device ff00
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, cache line size 08
Interrupt: pin B routed to IRQ 10
Region 0: Memory at b4008000 (32-bit, non-prefetchable)
Bus: primary=06, secondary=0b, subordinate=0e, sec-latency=176
Memory window 0: fff00000-000ff000 (prefetchable)
Memory window 1: 00000000-00000000 (prefetchable)
I/O window 0: 0000f000-00000fff
I/O window 1: 00000000-00000003
BridgeCtl: Parity- SERR- ISA+ VGA- MAbort- >Reset+ 16bInt- PostWrite-
16-bit legacy interface ports at 0001

0000:06:04.2 FireWire (IEEE 1394): Texas Instruments Texas Instruments OHCI Compliant IEEE 1394 Host Controller (prog-if 10 [OHCI])
Subsystem: Toshiba America Info Systems: Unknown device ff00
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 1000ns max), cache line size 08
Interrupt: pin C routed to IRQ 10
Region 0: Memory at b4009000 (32-bit, non-prefetchable)
Region 1: Memory at b4000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+

0000:06:04.3 Unknown mass storage controller: Texas Instruments Texas Instruments PCIxx21 Integrated FlashMedia Controller
Subsystem: Toshiba America Info Systems: Unknown device ff01
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 57 (1750ns min, 1000ns max), cache line size 08
Interrupt: pin B routed to IRQ 10
Region 0: Memory at b4004000 (32-bit, non-prefetchable)
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:06:04.4 Class 0805: Texas Instruments Texas Instruments PCI6411, PCI6421, PCI6611, PCI6621, PCI7411, PCI7421, PCI7611, PCI7621 Secure Digital (SD)
Subsystem: Toshiba America Info Systems: Unknown device ff01
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 57 (1750ns min, 1000ns max), cache line size 08
Interrupt: pin D routed to IRQ 10
Region 0: Memory at b400a000 (32-bit, non-prefetchable)
Region 1: Memory at b4009c00 (32-bit, non-prefetchable) [size=256]
Region 2: Memory at b4009800 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
#

[7.6.] SCSI information (from /proc/scsi/scsi)

# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: TOSHIBA MK8025GA Rev: KA02
Type: Direct-Access ANSI SCSI revision: 05
#

[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you
think to be relevant):

Here is one test that may be revealant:
starting X and watching the ACPI messages of dmesg:

# X &> x.out.txt
Message from syslogd@bird at Wed Jun 29 15:28:13 2005 ...
bird kernel: Disabling IRQ #10
- ----------here network stoped to work
#dmesg > dmesg.txt
#halt
- ----------[...everything else is halting fine]
acpi_power_off called
- ----------the laptop is still on, I reboot it manualy.
#cat dmesg.txt
oad: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
rx-polling: enabled
eth0: network connection down
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
rx-polling: enabled
eth0: network connection down
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
rx-polling: enabled
eth0: network connection down
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
rx-polling: enabled
eth0: network connection down
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
rx-polling: enabled
eth0: network connection down
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
rx-polling: enabled
eth0: network connection down
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
rx-polling: enabled
eth0: network connection down
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
rx-polling: enabled
eth0: network connection down
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
rx-polling: enabled
eth0: network connection down
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
rx-polling: enabled
eth0: network connection down
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
rx-polling: enabled
eth0: network connection down
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
rx-polling: enabled
eth0: network connection down
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
rx-polling: enabled
eth0: network connection down
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
rx-polling: enabled
eth0: network connection down
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
rx-polling: enabled
eth0: network connection down
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
rx-polling: enabled
eth0: network connection down
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
rx-polling: enabled
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
rx-polling: enabled
eth0: network connection down
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
rx-polling: enabled
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
rx-polling: enabled
eth0: network connection down
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
rx-polling: enabled
eth0: network connection down
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
rx-polling: enabled
eth0: network connection down
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
rx-polling: enabled
eth0: network connection down
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
rx-polling: enabled
eth0: network connection down
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
rx-polling: enabled
eth0: network connection down
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
rx-polling: enabled
eth0: network connection down
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
rx-polling: enabled
eth0: network connection down
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
rx-polling: enabled
eth0: network connection down
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
rx-polling: enabled
eth0: network connection down
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
rx-polling: enabled
eth0: network connection down
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
rx-polling: enabled
eth0: network connection down
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
rx-polling: enabled
eth0: network connection down
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
rx-polling: enabled
eth0: network connection down
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
rx-polling: enabled
eth0: network connection down
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
rx-polling: enabled
eth0: network connection down
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
rx-polling: enabled
eth0: network connection down
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
rx-polling: enabled
eth0: network connection down
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
rx-polling: enabled
eth0: network connection down
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
rx-polling: enabled
eth0: network connection down
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
rx-polling: enabled
irq 10: nobody cared!
[<c01362da>] __report_bad_irq+0x2a/0xa0
[<c0135c00>] handle_IRQ_event+0x30/0x70
[<c01363e0>] note_interrupt+0x70/0xb0
[<c0135d85>] __do_IRQ+0x145/0x160
[<c0104d77>] do_IRQ+0x47/0x70
=======================
[<c010333e>] common_interrupt+0x1a/0x20
[<c011babe>] __do_softirq+0x2e/0x90
[<c0104e81>] do_softirq+0x41/0x50
=======================
[<c011bbe5>] irq_exit+0x35/0x40
[<c0104d7e>] do_IRQ+0x4e/0x70
[<c010333e>] common_interrupt+0x1a/0x20
[<f92b007b>] _nv000166rm+0x1f3/0x314 [nvidia]
[<c018dd76>] proc_kill_inodes+0x16/0xf0
[<c018e2af>] remove_proc_entry+0x8f/0x150
[<c0136196>] free_irq+0xb6/0x130
[<f92b73b2>] nv_kern_close+0xb3/0x130 [nvidia]
[<c01584ae>] __fput+0x17e/0x190
[<c0156909>] filp_close+0x59/0x90
[<c01569ab>] sys_close+0x6b/0xa0
[<c01031cf>] syscall_call+0x7/0xb
handlers:
[<c0311220>] (ohci_irq_handler+0x0/0x7e0)
[<c0323590>] (usb_hcd_irq+0x0/0x70)
[<c0323590>] (usb_hcd_irq+0x0/0x70)
[<f8c67c80>] (SkY2Isr+0x0/0x270 [sk98lin])
Disabling IRQ #10
NVRM: rm_init_adapter(0) failed
# cat x.out.txt
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/bird:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6

X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.11-gentoo-r3 i686 [ELF]
Current Operating System: Linux bird 2.6.11-gentoo-r11 #1 Wed Jun 29 11:57:40 CEST 2005 i686
Build Date: 10 June 2005
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jun 29 15:28:08 2005
(==) Using config file: "/etc/X11/xorg.conf"
Using vt 7
NVIDIA: could not open the device file /dev/nvidia0 (Input/output error).
(EE) NVIDIA(0): The NVIDIA kernel module does not appear to be receiving
(EE) NVIDIA(0): interrupts generated by the NVIDIA graphics device.
(EE) NVIDIA(0): Please see the FREQUENTLY ASKED QUESTIONS section in the
(EE) NVIDIA(0): README for additional information.
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
(EE) NVIDIA(0): *** Aborting ***

Fatal server error:
AddScreen/ScreenInit failed for driver 0

Please consult the The X.Org Foundation support
at http://wiki.X.Org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
#

[X.] Other notes, patches, fixes, workarounds:

Note: This kernel has been patched with:
1-My own "fixed" DSDT, as an attempt to make it work.
http://www.kotarkh.ch/linux/dsdt-before-fix.dsl
http://www.kotarkh.ch/linux/dsdt-after-fix.dsl
2-The latest dsk9elin module. Network would not work without it.
http://syskonnect.com/syskonnect/support/driver/htm/sk9elin.htm
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFCwrL7Fm6LaI1U0NERAsyCAJ9Cj6Bg0LSbHWvRxNuxZ7n15U9lWgCgjKX4
Y+bHY77fAJSlMAr1GIVJXFg=
=gLle
-----END PGP SIGNATURE-----
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Markus Törnqvist: "Re: reiser4 plugins"
Previous message: Douglas McNaught: "Re: reiser4 plugins"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]