Aperture from northbridge cpu 0 too small (32 MB)
No AGP bridge found
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
init IO_APIC IRQs
IO-APIC (apicid-pin) 4-0, 4-16, 4-17, 4-18, 4-19, 4-20, 4-21, 4-22, 4-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ... failed.
timer doesn't work through the IO-APIC - disabling NMI Watchdog!
...trying to set up timer as Virtual Wire IRQ...Uhhuh. NMI received for unknown reason 3d.
Dazed and confused, but trying to continue
Do you have a strange power saving mode enabled?
failed.
...trying to set up timer as ExtINT IRQ... works.
CPU 1: synchronized TSC with CPU 0 (last diff 17 cycles, maxerr 519 cycles)
ACPI: Subsystem revision 20050309
ACPI-0352: *** Error: Looking up [\_SB_.PCI0.LNK0] in namespace, AE_NOT_FOUND
search_node ffff810142857280 start_node ffff810142857280 return_node 0000000000000000
ACPI-0352: *** Error: Looking up [\_SB_.PCI0.APC0] in namespace, AE_NOT_FOUND
search_node ffff810142857180 start_node ffff810142857180 return_node 0000000000000000
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI-0352: *** Error: Looking up [\_SB_.PCI0.APC0] in namespace, AE_NOT_FOUND
search_node ffff810142857180 start_node ffff810142857180 return_node 0000000000000000
ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0._PRT] (Node ffff810142857140), AE_NOT_FOUND
ACPI: PCI Interrupt 0000:02:00.0[A]: no GSI - using IRQ 5
PCI: Setting latency timer of device 0000:02:00.0 to 64
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: park 0
ehci_hcd 0000:00:02.1: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004