SCSI DVD-RAM partitions

[Thomas Heinz]

Hi

My SCSI DVD-RAM is available as /dev/sr1. fdisk -l /dev/sr1 shows
for a certain medium:

Note: sector size is 2048 (not 512)

Disk /dev/sr1: 2496 MB, 2496430080 bytes
255 heads, 63 sectors/track, 75 cylinders
Units = cylinders of 16065 * 2048 = 32901120 bytes

    Device Boot      Start         End      Blocks   Id  System
/dev/sr1p1   *           1          75     2409624    b  W95 FAT32


Note that /dev/sr1p1 does not exist. Neither does /dev/sdX.

Mounting /dev/sr1 does not work. However, I was able to mount the
partition with the following "trick":
# losetup -o 129024 /dev/loop0 /dev/sr1
# mount /dev/loop0 /mnt

Is it possible to make the DVD-RAM partitions available as device
nodes (or at least directly mountable without the losetup hack)?
One solution would be to make the device available as /dev/sdX and
/dev/srX. Is that possible?

Thanks for your help. If this is a known issue, I would appreciate
a pointer on that topic.


Here is some more information about my system:

Linux version 2.6.11-gentoo-r9 (root@localhost) (gcc version 
3.3.5-20050130 (Gentoo Hardened 3.3.5.20050130-r1, ssp-3.3.5.20050130-1, 
pie-8.7.7.1))

Host: scsi0 Channel: 00 Id: 04 Lun: 00
  Vendor: MATSHITA Model: PD-2 LF-D100     Rev: A113
  Type:   CD-ROM                           ANSI SCSI revision: 02


Regards,

Thomas
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/