Re: Kernel 2.6.12 + IO-APIC + uhci_hcd = Trouble
From: Michel Bouissou
Date: Mon Jul 11 2005 - 04:09:25 EST
Le Dimanche 10 Juillet 2005 20:50, Protasevich, Natalie a écrit :
>
> Michel,
> Symptoms that you describe resemble several IRQ problems with VIA
> chipset reported by others (but not quite...) Could you check on
> bugzilla #4843 please
> http://bugzilla.kernel.org/show_bug.cgi?id=4843 and see if the patch
> fixes your problem.
Hi Nathalie,
Thanks for your answer and pointer. Unfortunately it doesn't help.
The patch you mention won't apply on my kernel alone, I need first to apply
the patch from
http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=c434b7a6aedfe428ad17cd61b21b125a7b7a29ce ,
then your patch applies OK.
Unfortunately, it doesn't solve my issue. Booting this kernel still results in
an interrupt issue with uhci_hcd.
After boot, "cat /proc/interrupts" shows:
CPU0
0: 188066 IO-APIC-edge timer
1: 308 IO-APIC-edge i8042
2: 0 XT-PIC cascade
4: 413 IO-APIC-edge serial
7: 3 IO-APIC-edge parport0
14: 1177 IO-APIC-edge ide4
15: 1186 IO-APIC-edge ide5
18: 1028 IO-APIC-level eth0, eth1
19: 8513 IO-APIC-level ide0, ide1, ide2, ide3, ehci_hcd:usb4
21: 100000 IO-APIC-level uhci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3
22: 0 IO-APIC-level VIA8233
NMI: 0
LOC: 187967
ERR: 0
MIS: 0
(The problem is with IRQ 21 for uhci_hcd)
(It is to note that without those patches, I didn't see any IRQ managed by
"XT-PIC", all were managed by the IO-APIC...)
The errors I get in /var/log/messages are :
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
PCI: Via IRQ fixup for 0000:00:10.0, from 10 to 5
uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:10.0: irq 21, io base 0x0000cc00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Via IRQ fixup for 0000:00:10.1, from 10 to 5
uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (#2)
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: Via IRQ fixup for 0000:00:10.2, from 10 to 5
uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (#3)
usb 1-1: new low speed USB device using uhci_hcd and address 2
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d400
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usbcore: registered new driver hiddev
input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:10.0-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
PCI: Via IRQ fixup for 0000:00:10.3, from 11 to 3
ehci_hcd 0000:00:10.3: VIA Technologies, Inc. USB 2.0
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:10.3: irq 19, io mem 0xe3009000
ehci_hcd 0000:00:10.3: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
usb 1-1: USB disconnect, address 2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usb 1-1: new low speed USB device using uhci_hcd and address 3
input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:10.0-1
usb 3-2: new full speed USB device using uhci_hcd and address 3
irq 21: nobody cared!
[__report_bad_irq+42/144] __report_bad_irq+0x2a/0x90
[<c013cb5a>] __report_bad_irq+0x2a/0x90
[handle_IRQ_event+57/112] handle_IRQ_event+0x39/0x70
[<c013c449>] handle_IRQ_event+0x39/0x70
[note_interrupt+163/208] note_interrupt+0xa3/0xd0
[<c013cc83>] note_interrupt+0xa3/0xd0
[__do_IRQ+320/352] __do_IRQ+0x140/0x160
[<c013c5c0>] __do_IRQ+0x140/0x160
[do_IRQ+50/112] do_IRQ+0x32/0x70
[<c01054f2>] do_IRQ+0x32/0x70
[common_interrupt+26/32] common_interrupt+0x1a/0x20
[<c0103812>] common_interrupt+0x1a/0x20
[path_lookup+197/448] path_lookup+0xc5/0x1c0
[<c016f935>] path_lookup+0xc5/0x1c0
[do_page_fault+457/1427] do_page_fault+0x1c9/0x593
[<c0113a09>] do_page_fault+0x1c9/0x593
[open_exec+50/272] open_exec+0x32/0x110
[<c016a9e2>] open_exec+0x32/0x110
[pg0+947004132/1069421568] usb_hcd_irq+0x44/0x90 [usbcore]
[<f8b3f2e4>] usb_hcd_irq+0x44/0x90 [usbcore]
[handle_IRQ_event+57/112] handle_IRQ_event+0x39/0x70
[<c013c449>] handle_IRQ_event+0x39/0x70
[do_execve+66/592] do_execve+0x42/0x250
[<c016bc82>] do_execve+0x42/0x250
[sys_execve+70/176] sys_execve+0x46/0xb0
[sysenter_past_esp+84/117] sysenter_past_esp+0x54/0x75
[<c0102dfb>] sysenter_past_esp+0x54/0x75
handlers:
[pg0+947004064/1069421568] (usb_hcd_irq+0x0/0x90 [usbcore])
[<f8b3f2a0>] (usb_hcd_irq+0x0/0x90 [usbcore])
[pg0+947004064/1069421568] (usb_hcd_irq+0x0/0x90 [usbcore])
[<f8b3f2a0>] (usb_hcd_irq+0x0/0x90 [usbcore])
[pg0+947004064/1069421568] (usb_hcd_irq+0x0/0x90 [usbcore])
[<f8b3f2a0>] (usb_hcd_irq+0x0/0x90 [usbcore])
Disabling IRQ #21
At boot, IRQs seem to be distributed this way:
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router default [1106/3189] at 0000:00:00.0
PCI->APIC IRQ transform: 0000:00:0a.0[A] -> IRQ 18
PCI->APIC IRQ transform: 0000:00:0b.0[A] -> IRQ 19
PCI->APIC IRQ transform: 0000:00:0f.0[A] -> IRQ 19
PCI->APIC IRQ transform: 0000:00:10.0[A] -> IRQ 21
PCI->APIC IRQ transform: 0000:00:10.1[B] -> IRQ 21
PCI->APIC IRQ transform: 0000:00:10.2[C] -> IRQ 21
PCI->APIC IRQ transform: 0000:00:10.3[D] -> IRQ 19
PCI->APIC IRQ transform: 0000:00:11.1[A] -> IRQ 22
PCI->APIC IRQ transform: 0000:00:11.5[C] -> IRQ 22
PCI->APIC IRQ transform: 0000:00:13.0[A] -> IRQ 18
PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 16
Machine check exception polling timer started.
Hope this may help...
(Please copy me on answers, I'm not subscribed to the linux-kernel ML)
Cheers.
--
Michel Bouissou <michel@xxxxxxxxxxxx> OpenPGP ID 0xDDE8AC6E
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/