Re: [PATCH] i386: Selectable Frequency of the Timer Interrupt

[Vojtech Pavlik]

On Thu, Jul 14, 2005 at 12:25:40PM +0200, Krzysztof Halasa wrote:
> Linus Torvalds <torvalds@xxxxxxxx> writes:
> 
> > And in short-term things, the timeval/jiffie conversion is likely to be a 
> > _bigger_ issue than the crystal frequency conversion.
> >
> > So we should aim for a HZ value that makes it easy to convert to and from
> > the standard user-space interface formats. 100Hz, 250Hz and 1000Hz are all
> > good values for that reason. 864 is not.
> 
> Probably only theoretical, and probably the hardware isn't up to it...
> But what if we have:
> - 64-bit jiffies done in hardware (a counter). 1 cycle = 1 microsecond
>   or even a CPU clock cycle. Can *APIC or another HPET do that?

HPETs have a fixed frequency (usually 14.31818 MHz, but that depends
on the manufacturer).

> - 64-bit "match timer" (i.e., a register in the counter which fires IRQ
>   when it matches the counter value)

That's implemented in the HPET hardware.

> - the CPU(s) sorting the timer list and programming "match timer" with
>   software timer next to be executed. Upon firing the timer, a new "next
>   to be executed" timer would be programmed into the counter's "match
>   timer".
> 
> We would have no timer ticks when nobody requested them - the CPUs would
> be allowed to sleep for, say, even 50 ms when no task is RUNNING.

-- 
Vojtech Pavlik
SuSE Labs, SuSE CR
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/