Re: Trouble shooting a ten minute boot delay (SiI3112)

[Shaun Jackman]

2005/8/12, Steven Rostedt <rostedt@xxxxxxxxxxx>:
> Is the keyboard ever set up then? This is all happening before
> console_init (since that's when the prints start) and the early printk
> won't show anything before it parses the options.  For other
> architectures, I use to write out to the serial really early, just an
> 'x'. If you know how to do that, you could give it a try. Start at
> start_kernel in main hopefully you see the 'x'. If you do, keep moving
> it until you find where it's delaying.  Of course, this could be before
> start_kernel, then you're really screwed, unless you're good at doing
> the same in assembly (which I've done for MIPS, PPC and ARM, but never
> for x86).

Since each reboot takes ten minutes, this would be a tedious process.
Thanks for the suggestion though.

> > I compiled a vanilla 2.6.12.4 kernel, enabled EARLY_PRINTK and
> > rebooted with earlyprintk=vga. The kernel didn't display any extra
> > information before the delay.
> 
> Do you see grub saying "uncompressing kernel..." or whatever that says?

Grub says...

root (hd2,2)
  Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz-2.6.12.4 root=/dev/md0 ro nodma
   [Linux-bzImage, setup=0x1e00, size=0x1302ff]

I suspect this second message is where grub decompresses the kernel.
The last message grub displays is simply...

boot

Cheers,
Shaun
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/