Re: SiI 3112A + Seagate HDs = still no go? [SOLVED]

[Chris Boot]

Tejun Heo wrote:

> Chris Boot wrote:
>
> > Some interesting developments!
> >
> > I installed a fresh copy of Windows, and all the VIA and nVidia and  
> > so on drivers. At some point during all this (a period of relatively  
> > heavy disk IO), the computer seemed to crash and I rebooted it. It  
> > then worked fine for a while, but during my perfmon testing it 
> > seemed  to do the same thing. This time I left it for a while and it 
> > did  eventually wake up again, so I'm guessing the controller is a 
> > bit  fubared. Perfmon did indeed show several dips down to or very 
> > close  to 0 during the write operation, with peaks up to 48 MB/sec, 
> > which is  pretty respectable. So, time to replace the brand-new 
> > controller I  guess.
> >
> > Now, do you think this is just my one particular controller card and  
> > a simple return would fix the problem, or is it more likely a 
> > problem  with the whole range? It's an Innovision EIO SATA 
> > controller: http:// www.ivmm.com/eio/products/index.htm
> >
> > Would it be a safer bet to go for the Adaptec controller of the same  
> > variety? How reliable are they?
>
>
>  I frankly don't know.  Maybe it's just one faulty controller, 
> connector or whatever.  Maybe the card manufacturer screwed up 
> somewhere.  I mean, the only course I took in electronics is 
> introductory digital circuits which used 74xx chips and push triggered 
> clock on a breadboard.  What would I know about gigahertz signaling 
> error.  :-p
>
>  Though, one thing I can say is majority of 311x controllers don't 
> seem to suffer from this problem.  So, take your pick.
Right, I've replaced my previous controller with an Adaptec AHA-1205SA, 
and I'm rebulding 2 RAID-1 arrays at 50MB/sec without a hitch.

Thanks for your help diagnosing my problem, it was much appreciated!

Many thanks,
Chris

--
Chris Boot
bootc@xxxxxxxxx
http://www.bootc.net/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/