watchdog-mm git tree
From: Wim Van Sebroeck
Date: Wed Aug 17 2005 - 10:06:37 EST
Hi Andrew,
I (finaly) converted the watchdog-mm bitkeeper tree to a git repository:
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog-mm.git
The tree contains the following patches at this moment (in reverse order):
Author: Wim Van Sebroeck <wim@xxxxxxxxx>
Date: Tue Aug 16 14:52:23 2005 -0700
[WATCHDOG] Kconfig-clean
Move the ppc64 rtas drivers together with the other ppc drivers.
Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx>
Author: Naveen Gupta <ngupta@xxxxxxxxxx>
Date: Tue Aug 16 14:46:17 2005 -0700
[WATCHDOG] i6300esb-set_correct_reload_register_bit
This patch writes into bit 8 of the reload register to perform the
correct 'Reload Sequence' instead of writing into bit 4 of Watchdog for
Intel 6300ESB chipset.
Signed-off-by: Naveen Gupta <ngupta@xxxxxxxxxx>
Signed-off-by: David Härdeman <david@xxxxxxxx>
Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx>
Author: Naveen Gupta <ngupta@xxxxxxxxxx>
Date: Tue Aug 16 14:41:06 2005 -0700
[WATCHDOG] i6300esb.c-WDT_ENABLE-bug
This patch sets the WDT_ENABLE bit of the Lock Register to enable the
watchdog and WDT_LOCK bit only if nowayout is set. The old code always
sets the WDT_LOCK bit of watchdog timer for Intel 6300ESB chipset. So, we
end up locking the watchdog instead of enabling it.
Signed-off-by: Naveen Gupta <ngupta@xxxxxxxxxx>
Signed-off-by: David Härdeman <david@xxxxxxxx>
Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx>
Author: Jiri Slaby <xslaby@xxxxxxxxxx>
Date: Tue Aug 16 14:35:42 2005 -0700
[WATCHDOG] removes pci_find_device from i6300esb.c
This patch changes pci_find_device to pci_get_device
(encapsulated in for_each_pci_dev) in i6300esb watchdog
card with appropriate adding pci_dev_put.
Generated in 2.6.13-rc5-mm1 kernel version.
Signed-off-by: Jiri Slaby <xslaby@xxxxxxxxxx>
Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx>
Author: David Hardeman <david@xxxxxxxx>
Date: Tue Aug 16 14:17:18 2005 -0700
[WATCHDOG] i6300esb.patch
From: David Hardeman <david@xxxxxxxx>
I wrote earlier to the list[1] asking for a driver for the watchdog
included in the 6300ESB chipset. I got a 2.4 driver via private email
from Ross Biro which I've changed into what I hope resembles a 2.6
driver (which was done by looking a lot at the watchdog drivers
already in the 2.6 tree).
I've attached the result, and I'm hoping to get some feedback on the
coding as a first step. I can't actually test it on the hardware
right now as I won't have physical access until April. So my own tests
have been limited to "compiles-without-warnings" and
"can-be-insmodded-in-other-machine-without-oops".
[1] http://marc.theaimsgroup.com/?l=linux-kernel&m=110711079825794&w=2
[2] http://marc.theaimsgroup.com/?l=linux-kernel&m=110711973917746&w=2
Signed-off-by: Andrew Morton <akpm@xxxxxxxx>
Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx>
Author: P@Draig Brady <P@xxxxxxxxxxxxxx>
Date: Tue Aug 16 14:02:15 2005 -0700
[WATCHDOG] w83627hf_wdt.c-initialized_bios_bug
Attached is a small update to the w83627hf watchdog driver
to initialise appropriately if it was already initialised
in the BIOS. On tyan motherboards for e.g. you can init
the watchdog to 4 mins, then when the driver is loaded it
sets the watchdog to "seconds" mode, and then machine will
reboot within 4 seconds. So this patch resets the timeout
to the configured value if the watchdog is already running.
Signed-off-by: P@draig Brady <P@xxxxxxxxxxxxxx>
Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx>
Author: Ben Dooks <ben-linux@xxxxxxxxx>
Date: Tue Aug 16 13:51:51 2005 -0700
[WATCHDOG] s3c2410 watchdog - replace reboot notifier
Patch from Dimitry Andric <dimitry.andric@xxxxxxxxxx>
Change to using platfrom driver's .shutdown method instead
of an reboot notifier
Signed-off-by: Dimitry Andric <dimitry.andric@xxxxxxxxxx>
Signed-off-by: Ben Dooks <ben-linux@xxxxxxxxx>
Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx>
Author: Ben Dooks <ben-linux@xxxxxxxxx>
Date: Tue Aug 16 13:45:04 2005 -0700
[WATCHDOG] s3c2410 watchdog power management
Patch from Dimitry Andric <dimitry.andric@xxxxxxxxxx>, updated
by Ben Dooks <ben-linux@xxxxxxxxx>. Patch is against 2.6.11-mm2
Add power management support to the s3c2410 watchdog, so that
it is shut-down over suspend, and re-initialised on resume.
Also add Dimitry to the list of authors.
Signed-off-by: Dimitry Andric <dimitry.andric@xxxxxxxxxx>
Signed-off-by: Ben Dooks <ben-linux@xxxxxxxxx>
Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx>
Author: James Chapman <jchapman@xxxxxxxxxxx>
Date: Tue Aug 16 13:38:15 2005 -0700
[WATCHDOG] mv64x60_wdt.patch
Add mv64x60 (Marvell Discovery) watchdog support.
Signed-off-by: James Chapman <jchapman@xxxxxxxxxxx>
Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx>
Author: Olaf Hering <olh@xxxxxxx>
Date: Tue Aug 16 13:23:31 2005 -0700
[WATCHDOG] correct sysfs name for watchdog devices
While looking for possible candidates for our udev.rules package,
I found a few odd ->name properties. /dev/watchdog has minor 130
according to devices.txt. Since all watchdog drivers use the
misc_register() call, they will end up in /sys/class/misc/$foo.
udev may create the /dev/watchdog node if the driver is loaded.
I dont have such a device, so I cant test it.
The drivers below provide names with spaces and even with / in it.
Not a big deal, but apps may expect /dev/watchdog.
Signed-off-by: Olaf Hering <olh@xxxxxxx>
Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx>
Author: Wim Van Sebroeck <wim@xxxxxxxxx>
Date: Tue Aug 16 13:08:25 2005 -0700
[WATCHDOG] Makefile-probe_order-patch
Re-arrange Makefile according to what we want to probe first.
Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx>
Greetings,
Wim.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/