RE: The Linux FAT issue on SD Cards.. maintainer support please

[Mukund JB`.]

Dear Lennart,

>> I found that both of then do NOT have the partition table.
>
>If you don't use fdisk to create a partition on the card, then you
won't
>have one.  

I am having the partition table on the cam formatted CARD 
i.e. the partition 0.

> If you mkdosfs on /dev/tfa0 then you loose the partition
>table and get a filesystem on just the whole disk.  If you do it with
>/dev/tfa0p1 then you do it on the first partition which would then have
>the FAT filesystem starting at the offset of the first partition (as it
>should).

Ok, I understood it. It looks like we have to verify the partition
support we have implemented in the driver.

>That is right.  Although I believe if windows sees one with a partition
>table it will just use the first valid partition table entry it finds
>and ignore the rest.

To handle it in a similarly in Linux we need to support this driver with
partitions. There looks a loop hole in the driver. 
I will verify and fix it today.

>> Please see the Images-All-MS-512.tar.gz.
>
>Well to mount anything without a partition table, you would mount the
>whole device (/dev/tfa0) and to mount one with a partition table on it,
>you would mount /dev/tfa0p1 or tfa0p4 or whichever partition it is.
>
>Zip drives used to be the same way.  Some were formated with 1
partition
>(usually 1 or 4) and some had no partition table at all and used the
>whole disk for the filesystem.  I always had a /zip and /zip4 mount
>point I used depending on the particular disk I was looking at.
Just out of inquisitive ness.

What r u the minor numbers of those zip devices.
ll /dev/zip 
ll /dev/zip4

Thanks for ur support.
I will check with partition support in the driver & update it.
Let me fix it there and come back.

Regards,
Mukund Jampala

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/