Re: new qla2xxx driver breaks SAN setup with 2 controllers

[Christoph Hellwig]

On Wed, Aug 24, 2005 at 02:48:03PM +0200, Frederik Schueler wrote:
> Hello,
> 
> On Wed, Aug 24, 2005 at 11:01:12AM +0100, Christoph Hellwig wrote:
> > > yes exactly, only the bootdrive LUN is registered after bootup. I have
> > > to selectively scsiadd the other LUNs if there is a gap between the 
> > > boot LUN (1-8 in our setup) and the shared storages (9-14). I don't
> > > consider this a bug though, I had to remove some devices otherwise, 
> > > and old drivers had to be patched to allow this at all.
> > 
> > Actually this sounds like a bug in your storage system.  It's probably
> > reporting to be only SCSI2 complicant, which doesn't make sense for
> > FC storage.  Please try the patch below:
> 
> [...]
> 
> Unfortunately this does not fix this issue, besides the SAN being 
> reported as a scsi3 device now.

Cane you add BLIST_SPARSELUN and BLIST_LARGELUN to the flags aswell?

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/