[PATCH 4/3] Radeon acpi vgapost only Rv250 (M9)

[Michael Marineau]

Manuel Lauss wrote:
> Michael Marineau wrote:
> 
>> Thses patches resume ATI radeon cards from acpi S3 suspend when using
>> radeonfb by reposting the video bios. This is needed to be able to use
>> S3 when the framebuffer is enabled.
> 
> 
> These patches break resume from S3 for me. On a vanilla kernel,
> radeonfb comes back fine, with your patches applied, the backlight
> gets turned on (by BIOS I think) and shortly afterwards its turned off
> for good. (Radeon M11 on Sony Vaio)
> 
Ok, attached is a patch to only attempt a vga post on Rv250 cards (M9)
which I have in my laptop.  I'm guessing cards older than M9 might also
be helped with this patch, but better to be conservative than risk
breaking systems that do work properly.
-- 
Michael Marineau
marineam@xxxxxxxxxxxxx
Oregon State University
Index: linux-2.6.13-rc7/drivers/video/aty/radeon_pm.c
===================================================================
--- linux-2.6.13-rc7.orig/drivers/video/aty/radeon_pm.c
+++ linux-2.6.13-rc7/drivers/video/aty/radeon_pm.c
@@ -2790,7 +2790,8 @@ void radeonfb_pm_init(struct radeonfb_in
 #endif /* defined(CONFIG_PM) && defined(CONFIG_PPC_OF) */
 
 #if defined(CONFIG_ACPI) && defined(CONFIG_X86)
-	if (rinfo->is_mobility && rinfo->pm_reg) {
+	if (rinfo->is_mobility && rinfo->pm_reg &&
+	     rinfo->family == CHIP_FAMILY_RV250) {
 		rinfo->reinit_func = radeon_reinitialize_vgapost;
 		rinfo->pm_mode |= radeon_pm_post;
 	}

Attachment: signature.asc
Description: OpenPGP digital signature