Re: Linux Kernel 2.6.13-rc7 (WORKS) (2.6.13, DRQ/System CRASH)

[Justin Piszcz]

I do not even have IDE Taskfile Access enabled, so how is the kernel 
printing these error messages before it freezes?

linux-2.6.13/drivers/ide/ide-taskfile.c:                printk(KERN_ERR 
"%s: no DRQ after issuing %sWRITE%s\n",


  lqqqqqqqqqqqqqqqqqqqqqqq ATA/ATAPI/MFM/RLL support qqqqqqqqqqqqqqqqqqqqqqqk
  x x[ ]     IDE Taskfile Access


Anyone have any suggestions how I can solve this problem?


On Wed, 31 Aug 2005, Justin Piszcz wrote:

> All,
>
> I am trying to get everyone together on this to hopefully solve a serious bug 
> that I have seen on multiple machines with:
>
> a) A Promise ATA/133 controller (ATA/100 works OK)
> b) Kernel 2.6.12 or 2.6.13 (2.6.13-rc7 appears to be OK)
>
> The drive is a Seagate 7200.8 400GB 7200RPM 8MB cache disk.
> hde: ST3400832A, ATA DISK drive
>
> With older kernels, if I *DO NOT ENABLE DMA* it does not crash.
> If I *ENABLE DMA* then proceed to do anything with the disk, it will FREEZE 
> the box, no oops, etc, *FREEZE*.
>
> hdparm -t /dev/hde
> mkfs.xfs -f /dev/hde1
>
> Will freeze the box.
>
> -------
>
> Linux Kernel 2.6.13 final experiences the same problems as 2.6.12.5.
>
> I have e-mailed the list quite a few times with this issue, I am surprised 
> very few people run into it.
>
> Here is the error in the logs:
>
> Aug 31 11:30:25 p34 kernel: hde: dma_timer_expiry: dma status == 0x20
> Aug 31 11:30:25 p34 kernel: hde: DMA timeout retry
> Aug 31 11:30:25 p34 kernel: PDC202XX: Primary channel reset.
> Aug 31 11:30:25 p34 kernel: hde: timeout waiting for DMA
> Aug 31 11:30:25 p34 kernel: hde: status error: status=0x58 { DriveReady
> SeekComplete DataRequest }
> Aug 31 11:30:25 p34 kernel: hde: drive not ready for command
> Aug 31 11:30:25 p34 kernel: hde: status timeout: status=0xd0 { Busy }
> Aug 31 11:30:25 p34 kernel: PDC202XX: Primary channel reset.
> Aug 31 11:30:25 p34 kernel: hde: no DRQ after issuing MULTWRITE_EXT
> Aug 31 11:30:25 p34 kernel: ide2: reset: success
>
> After this, the machine locks up with 2.6.13.
>
> With 2.6.13-rc7, I have not seen this once.
>
> Can anyone offer any insight to why this is happening? I have a few machines 
> with the ATA/133 controller and 400GB drives; therefore, I'd prefer to fix 
> the problem rather than hooking up older, ATA/100 drives, just so I can run 
> newer kernels...
>
> Thanks.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/