2.6.14-rc4-mm1 and later: second ata_piix controller is invisible

[Max Kellermann]

Hi Andrew,

since 2.6.14-rc4-mm1, my second ata_piix (SATA) controller does not
show up in dmesg, effectively hiding /dev/sdb.  2.6.14-rc2-mm2 and
older (with the same kernel config) were ok, the same for Linus'
kernels: 2.6.14-rc5 without -mm1 has /dev/sdb, too.

0000:00:1f.2 IDE interface: Intel Corp. 82801EB (ICH5) Serial ATA 150
Storage Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
0000:00:1f.2 0101: 8086:24d1 (rev 02)

This PCI device (on-board on an Asus P4 mainboard) has two SATA
connectors, showing up as ata1/sda and ata2/sdb.

dmesg from 2.6.14-rc5:

libata version 1.12 loaded.
ata_piix version 1.04
ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0xEFE0 ctl 0xEFAE bmdma 0xEF60 irq 177
ata2: SATA max UDMA/133 cmd 0xEFA0 ctl 0xEFAA bmdma 0xEF68 irq 177
ata1: dev 0 cfg 49:2f00 82:7c6b 83:7b09 84:4003 85:7c69 86:3a01
87:4003 88:207f
ata1: dev 0 ATA, max UDMA/133, 240121728 sectors:
ata1: dev 0 configured for UDMA/133

dmesg from 2.6.14-rc5-mm1:

libata version 1.12 loaded.
ata_piix version 1.04
ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0xEFE0 ctl 0xEFAE bmdma 0xEF60 irq 193
ata1: dev 0 cfg 49:2f00 82:7c6b 83:7b09 84:4003 85:7c69 86:3a01
87:4003 88:207f
ata1: dev 0 ATA-7, max UDMA/133, 240121728 sectors: LBA
ata1: dev 0 configured for UDMA/133

Need more information?  I could try to disable a few patches from your
-mm series if you name some..  it's too hard for me to guess which one
could be responsible for the breakage.

Max

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/