Re: dumb muliport serial cards not supported in 2.6.13.4 ???

[Russell King]

On Thu, Oct 27, 2005 at 09:14:18AM +0200, Jarek wrote:
> Hi all!
> 
> 	I've PCM 3643, 8 port dumb multiport serial card from Advantech.
> 	This card works nice with 2.6.12 but with 2.6.13.4 I can see only two
> ports!
> 	This is dumb 8250 (exactly: 16550A) multiport board. In 2.6.12 I've the
> following settings:
> 
> CONFIG_SERIAL_8250=y
> CONFIG_SERIAL_8250_CONSOLE=y
> CONFIG_SERIAL_8250_NR_UARTS=4
> CONFIG_SERIAL_8250_EXTENDED=y
> CONFIG_SERIAL_8250_MANY_PORTS=y
> CONFIG_SERIAL_8250_SHARE_IRQ=y
> CONFIG_SERIAL_8250_MULTIPORT=y
> CONFIG_SERIAL_8250_RSA=y
> CONFIG_SERIAL_CORE=y
> CONFIG_SERIAL_CORE_CONSOLE=y
> 
> I've tried to setup same in 2.6.13.4, but it claims:
> .config:761: trying to assign nonexistent symbol SERIAL_8250_MULTIPORT
> 
> I suspect that this is the problematic setting but there is nothing
> about this in any Changelog.
> 
> What should I do ?

Please send the kernel messages from this kernel so we can see what's
going on.  (this would be useful whatever.)

At a guess you need to increase CONFIG_SERIAL_8250_NR_UARTS.  It now
represents the _total_ number of ports.

-- 
Russell King
 Linux kernel    2.6 ARM Linux   - http://www.arm.linux.org.uk/
 maintainer of:  2.6 Serial core
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/