Re: [BUG 2579] linux 2.6.* sound problems

[Patrizio Bassi]

Ray Lee ha scritto:
> On 10/31/05, Patrizio Bassi <patrizio.bassi@xxxxxxxxx> wrote:
> 
>>starting from 2.6.0 (2 years ago) i have the following bug.
> 
> 
> Well, the problem probably started before then.
> 
> 
>>link: http://bugzilla.kernel.org/show_bug.cgi?id=2579
> 
> 
>>Please fix that...2 years' bug!
> 
> 
> Speaking as a programmer, that's not a lot to go off of to find the
> bug. I think everyone would agree it's a bug, but we'll need more help
> from you.
> 
> 
>>fast summary:
>>when playing audio and using a bit the harddisk (i.e. md5sum of a 200mb
>>file) i hear noises, related to disk activity. more hd is used, more chicks
>>and ZZZZ noises happen.
> 
> 
> Does hdparm -i (or -I) show differences between the 2.4 kernels and
> 2.6? 2.6 has new IDE drivers, and so perhaps your system isn't using
> the best driver any more.
> 
> You may also want to compare lspci -vv of your IDE controller and
> sound card between 2.4 and 2.6, and see if there are any differences.
> 
> No guarantees, but this is where you'd start.
> 
> 
>>Ready to test any patch/solution.
> 
> 
> Try that. If nothing obvious appears in the examination, you may want
> to try the 2.6.14-rt1 patchset from Ingo Molnar. It's designed to
> reduce latency in the kernel, but also has a latency tracer that may
> be particularly useful for your problem. (Assuming it's a latency
> issue, and not a hardware misconfiguration due to 2.6 doing something
> wrong.)
> 
> Ray

actually i don't have any more 2.4 kernels due to some problems with
other devices.

however i remember i checked that and it was pretty the same

i know i gave you all few infos, but, ask me and i'll try more.

i have an intel bx440 chipset, udma33.

kernel is perfectly tuned.

i notice that with dma disabled it works much better.
problem happens with hda/hdc, so both ide channels.




hdparm -i /dev/hda

/dev/hda:

 Model=IBM-DTLA-307030, FwRev=TX4OA50C, SerialNo=YKDYKV9J094
 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
 RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=40
 BuffType=DualPortCache, BuffSize=1916kB, MaxMultSect=16, MultSect=off
 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=60036480
 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes:  pio0 pio1 pio2 pio3 pio4
 DMA modes:  mdma0 mdma1 mdma2
 UDMA modes: udma0 udma1 *udma2
 AdvancedPM=yes: disabled (255) WriteCache=enabled
 Drive conforms to: ATA/ATAPI-5 T13 1321D revision 1:

 * signifies the current active mode

 hdparm -i /dev/hdc

/dev/hdc:

 Model=IC35L060AVV207-0, FwRev=V22OA63A, SerialNo=VNVB07G2RJ2X4M
 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
 RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=52
 BuffType=DualPortCache, BuffSize=1821kB, MaxMultSect=16, MultSect=off
 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=120103200
 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes:  pio0 pio1 pio2 pio3 pio4
 DMA modes:  mdma0 mdma1 mdma2
 UDMA modes: udma0 udma1 *udma2
 AdvancedPM=yes: disabled (255) WriteCache=enabled
 Drive conforms to: ATA/ATAPI-6 T13 1410D revision 3a:

 * signifies the current active mode



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/