2.6 series kernels panic on boot at PCI probe with 450nx

From: Frank Overton
Date: Fri Nov 04 2005 - 19:07:24 EST

Next message: Paul Mackerras: "Re: [PATCH 0/42] PCI Error Recovery for PPC64 and misc device drivers"
Previous message: Nick Piggin: "Re: [Lhms-devel] [PATCH 0/7] Fragmentation Avoidance V19"
Next in thread: Greg KH: "Re: 2.6 series kernels panic on boot at PCI probe with 450nx"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

[1.] 2.6 series kernels panic on boot at PCI probe with 450nx (2.4.x kernels boot without hitch) [2.] System: HP Netserver LH4s
[3.] Keywords: kernel, i450nx, PCI probe, boot, panic
[4.] Kernel version: 2.6.9-22, 2.6.9-11 by me and (2.6.6, 2.6.7 by Andrew Feldhacker)

[7.7.] For an additional example see: Andrew Feldhacker's June 2004 report at http://uwsg.ucs.indiana.edu/hypermail/linux/kernel/0407.0/0915.html

[X.] Other notes:
-Someone reported that Mandrake 10.2 beta did not have this problem.
-I know the legacy megaraid now requires a custom built kernel. I just can't get past the PCI-Probe to install it.

[7.] Environment
[7.2.] Processor information (from /proc/cpuinfo):
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 550.045
cache size : 512 KB
physical id : 0
siblings : 1
runqueue : 0
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips : 1097.72

processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 550.045
cache size : 512 KB
physical id : 0
siblings : 1
runqueue : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips : 1097.72

processor : 2
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 550.045
cache size : 512 KB
physical id : 0
siblings : 1
runqueue : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips : 1097.72

processor : 3
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 550.045
cache size : 512 KB
physical id : 0
siblings : 1
runqueue : 3
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips : 1097.72

[7.3.] Module information (from /proc/modules):
ide-cd 34016 0 (autoclean)
cdrom 32896 0 (autoclean) [ide-cd]
qla2100 287804 5
iptable_filter 2412 0 (autoclean) (unused)
ip_tables 16544 1 [iptable_filter]
softdog 3004 1
usbserial 23964 0 (autoclean) (unused)
parport_pc 18884 1 (autoclean)
lp 9156 0 (autoclean)
parport 38848 1 (autoclean) [parport_pc lp]
autofs4 16984 0 (autoclean) (unused)
lock_gulm 65712 1
crc32 3764 0 [lock_gulm]
gfs 291308 1 (autoclean)
lock_harness 3576 0 (autoclean) [lock_gulm gfs]
pool 84928 4
natsemi 20000 1
e100 60048 1
floppy 57552 0 (autoclean)
sg 37388 0 (autoclean)
microcode 6912 0 (autoclean)
keybdev 2976 0 (unused)
mousedev 5688 1
hid 22308 0 (unused)
input 6176 0 [keybdev mousedev hid]
usbcore 81152 1 [usbserial hid]
ext3 89992 2
jbd 55092 2 [ext3]
megaraid 30636 3
sd_mod 13936 16
scsi_mod 115240 3 [qla2100 sg megaraid sd_mod]

[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0378-037a : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
1040-105f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI
1400-14ff : LSI Logic / Symbios Logic 53c895
8000-803f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI
9000-901f : Intel Corp. 82371AB/EB/MB PIIX4 USB
9020-902f : Intel Corp. 82371AB/EB/MB PIIX4 IDE
9020-9027 : ide0
a000-afff : PCI Bus #01
a000-a0ff : LSI Logic / Symbios Logic 53c895 (#2)
b000-bfff : PCI Bus #02
b000-b0ff : National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller
b000-b0ff : eth1
b400-b4ff : QLogic Corp. QLA2100 64-bit Fibre Channel Adapter
b400-b4ff : qla2100
b800-b81f : Intel Corp. 82557/8/9 [Ethernet Pro 100]
b800-b81f : e100

iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000c8000-000c87ff : Extension ROM
000c8800-000c97ff : Extension ROM
000c9800-000c9fff : Extension ROM
000f0000-000fffff : System ROM
00100000-e7feffff : System RAM
00100000-002aba6e : Kernel code
002aba6f-003efb27 : Kernel data
e7ff0000-e7fffbff : ACPI Tables
e7fffc00-e7ffffff : ACPI Non-volatile Storage
e8000000-e8007fff : Hewlett-Packard Company NetServer Smart IRQ Router
e8008000-e8008fff : Cirrus Logic GD 5446
e8009000-e80090ff : LSI Logic / Symbios Logic 53c895
e800a000-e800afff : LSI Logic / Symbios Logic 53c895
e8100000-e81fffff : PCI Bus #01
e8100000-e8100fff : LSI Logic / Symbios Logic 53c895 (#2)
e8101000-e81010ff : LSI Logic / Symbios Logic 53c895 (#2)
e8200000-e83fffff : PCI Bus #02
e8200000-e82fffff : Intel Corp. 82557/8/9 [Ethernet Pro 100]
e8200000-e82fffff : e100
e8300000-e8300fff : National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller
e8300000-e8300fff : eth1
e8301000-e8301fff : QLogic Corp. QLA2100 64-bit Fibre Channel Adapter
e8301000-e8301fff : qla2100
ea000000-ebffffff : Cirrus Logic GD 5446
f0000000-f7ffffff : Intel Corp. 80960RP [i960RP Microprocessor]
f0000000-f000007f : MegaRAID: LSI Logic Corporation
f8000000-f80fffff : PCI Bus #02
f8000000-f8000fff : Intel Corp. 82557/8/9 [Ethernet Pro 100]
f8000000-f8000fff : e100
fec00000-fec0ffff : reserved
fee00000-fee00fff : reserved
fffe8800-ffffffff : reserved

[7.5.] PCI information ('lspci -vvv' as root)

00:02.0 PCI bridge: Intel Corp. 80960RP [i960 RP Microprocessor/Bridge] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, cache line size 08 Bus: primary=00, secondary=01, subordinate=01, sec-latency=248 I/O behind bridge: 0000a000-0000afff Memory behind bridge: e8100000-e81fffff Prefetchable memory behind bridge: fff00000-000fffff BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- 00:02.1 I2O: Intel Corp. 80960RP [i960RP Microprocessor] (rev 03) (prog-if 01) Subsystem: Hewlett-Packard Company MegaRAID T5, Integrated HP NetRAID Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, cache line size 08 Interrupt: pin A routed to IRQ 10 BIST result: 00 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Expansion ROM at <unassigned> [disabled] [size=32K] 00:03.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, cache line size 08 Bus: primary=00, secondary=02, subordinate=02, sec-latency=234 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: e8200000-e83fffff Prefetchable memory behind bridge: 00000000f8000000-00000000f8000000 BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- 00:06.0 System peripheral: Hewlett-Packard Company NetServer Smart IRQ Router (rev a0) Subsystem: Hewlett-Packard Company: Unknown device 0001 Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Region 0: Memory at e8000000 (32-bit, non-prefetchable) [size=32K] 00:08.0 VGA compatible controller: Cirrus Logic GD 5446 (rev 45) (prog-if 00 [VGA]) Subsystem: Hewlett-Packard Company: Unknown device 0001 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Region 0: Memory at ea000000 (32-bit, prefetchable) [size=32M] Region 1: Memory at e8008000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at <unassigned> [disabled] [size=32K] 00:0f.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:0f.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Region 4: I/O ports at 9020 [size=16] 00:0f.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI]) Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin D routed to IRQ 0 Region 4: I/O ports at 9000 [size=32] 00:0f.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin ? routed to IRQ 9 00:10.0 Host bridge: Intel Corp. 450NX - 82451NX Memory & I/O Controller (rev 03) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:12.0 Host bridge: Intel Corp. 450NX - 82454NX/84460GX PCI Expander Bridge (rev 02) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 72, cache line size 08 01:07.0 SCSI storage controller: LSI Logic / Symbios Logic 53c895 (rev 01) Subsystem: Hewlett-Packard Company: Unknown device 1000 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 247 (7500ns min, 16000ns max), cache line size 08 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at 1400 [size=256] Region 1: Memory at e8009000 (32-bit, non-prefetchable) [size=256] Region 2: Memory at e800a000 (32-bit, non-prefetchable) [size=4K] 01:07.0 SCSI storage controller: LSI Logic / Symbios Logic 53c895 (rev 01) Subsystem: Hewlett-Packard Company: Unknown device 1000 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 247 (7500ns min, 16000ns max), cache line size 08 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at a000 [size=256] Region 1: Memory at e8101000 (32-bit, non-prefetchable) [size=256] Region 2: Memory at e8100000 (32-bit, non-prefetchable) [size=4K] 02:02.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 05) Subsystem: Hewlett-Packard Company NetServer 10/100TX Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 66 (2000ns min, 14000ns max), cache line size 08 Interrupt: pin A routed to IRQ 15 Region 0: Memory at f8000000 (32-bit, prefetchable) [size=4K] Region 1: I/O ports at b800 [size=32] Region 2: Memory at e8200000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at <unassigned> [disabled] [size=1M] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 02:03.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller Subsystem: Netgear FA311 / FA312 (FA311 with WoL HW) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B+ Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 90 (2750ns min, 13000ns max) Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at b000 [size=256] Region 1: Memory at e8300000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME+ 02:04.0 SCSI storage controller: QLogic Corp. QLA2100 64-bit Fibre Channel Adapter (rev 03) Subsystem: QLogic Corp. QLA2100 64-bit Fibre Channel Adapter Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, cache line size 08 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at b400 [size=256] Region 1: Memory at e8301000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at <unassigned> [disabled] [size=64K]

[7.6.] SCSI information (from /proc/scsi/scsi)
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: MegaRAID Model: LD0 RAID1 8677R Rev: D
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 00 Lun: 00
Vendor: HP Model: FCArray 5_104196 Rev: 5549
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 00 Lun: 01
Vendor: HP Model: FCArray 5_69464 Rev: 5549
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 00 Lun: 02
Vendor: HP Model: FCArray 5_104196 Rev: 5549
Type: Direct-Access ANSI SCSI revision: 02

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Paul Mackerras: "Re: [PATCH 0/42] PCI Error Recovery for PPC64 and misc device drivers"
Previous message: Nick Piggin: "Re: [Lhms-devel] [PATCH 0/7] Fragmentation Avoidance V19"
Next in thread: Greg KH: "Re: 2.6 series kernels panic on boot at PCI probe with 450nx"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]