Re: pxa27x_udc -- support for usb gadget for pxa27x?

[Mark Underwood]

--- Pavel Machek <pavel@xxxxxx> wrote:

> Hi!
> 
> > > Pavel Machek wrote:
> > > > 
> > > > ...for the spitz. Do you think I can just copy this one? ...eh, no,
> > > > will not fly, there's no SPITZ_GPIO_USB_PULLUP.
> > > 
> > > There are internal pull-ups (and pull-downs) perhaps you can use those?
> > > 
> > > Hmmm. Though the C5 stepping might be different -- best to check the
> > > "specification update".
> > 
> > I can confirm that you'll need to use the internal pxa27x pullups
> > for
> 
> How can I use pxa27x pullups?
> 
> > this. You'll probably also need to make sure GPIO 35 is low to ensure
> > the usb Vcc line isn't powered (as it would be in usb host mode.
> 
> Are you sure? spitz_ohci_init() seems to play with GPIO 37.
> 
> (Perhaps spitz_ohci_init should disable the other GPIO?)
> 
> > Ultimately, it would be nice to have the Zaurus detect whether a usb
> > host or client was present (using gpio 41 maybe?) and then activate the
> > host (ohci) or client (pxa27x_udc) driver as appropriate.
> 
> Unfortunately, that would make ohci unfunctional for me. I have normal
> usb device cable, connected to "USB gender changer" -- basically two
> female connectors -- so that I can plug USB network card into that.
> 

Just a thought. How about a sysfs entry which you can use to jam the device into either slave or
host mode?

Mark

> 								Pavel
> 
> -- 
> Thanks, Sharp!
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
> 



	
	
		
___________________________________________________________ 
Yahoo! Messenger - NEW crystal clear PC to PC calling worldwide with voicemail http://uk.messenger.yahoo.com
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/