Re: Linux 2.6.15-rc3
From: Greg KH
Date: Tue Nov 29 2005 - 18:40:16 EST
On Tue, Nov 29, 2005 at 02:53:28PM -0800, Stephen Hemminger wrote:
> On Tue, 29 Nov 2005 23:42:35 +0100
> "Rafael J. Wysocki" <rjw@xxxxxxx> wrote:
>
> > Update:
> >
> > On Tuesday, 29 of November 2005 22:47, Rafael J. Wysocki wrote:
> > > On Tuesday, 29 of November 2005 05:11, Linus Torvalds wrote:
> > > >
> > > > I just pushed 2.6.15-rc3 out there, and here are both the shortlog and
> > > > diffstats appended.
> > >
> > > Hangs solid on boot on dual-core Athlon64. No details yet, but I'm working
> > > on them. I wonder if anyone else is seeing this.
> >
> > The problem is caused by the ehci_hcd driver and fixed by the David
> > Brownell's ehci-hang-fix.patch that's already in -mm.
>
> I assume this is that bug:
> --
> [ 47.145873] kjournald starting. Commit interval 5 seconds
> [ 47.187797] EXT3-fs: mounted filesystem with ordered data mode.
> [ 48.395152] usbcore: registered new driver usbfs
> [ 48.433382] usbcore: registered new driver hub
> [ 58.733294] NMI Watchdog detected LOCKUP on CPU 1
> [ 58.770674] CPU 1
> [ 58.799348] Modules linked in: ehci_hcd i2c_amd8111 i2c_amd756 i2c_core snd_intel8x0 snd_ac97_codec snd_ac97_bus snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc sky2 tg3 usbcore
> [ 58.950846] Pid: 2042, comm: modprobe Not tainted 2.6.15-rc3-sky2 #1
> [ 58.996375] RIP: 0010:[<ffffffff803c145b>] <ffffffff803c145b>{.text.lock.spinlock+34}
> [ 59.022530] RSP: 0018:ffff81007fb39bb0 EFLAGS: 00000086
> [ 59.090005] RAX: 0000000000000296 RBX: 0000000000002301 RCX: 0000000000000005
> [ 59.138990] RDX: 0000000000000008 RSI: 0000000000002301 RDI: ffff81007cf84554
> [ 59.187922] RBP: 0000000000000005 R08: 0000000000000000 R09: 0000000000000000
> [ 59.236698] R10: 0000000000000037 R11: 000000000000000a R12: ffff81007cf84400
> [ 59.285266] R13: 0000000000002395 R14: 0000000000000008 R15: ffff81007cf84538
> [ 59.333549] FS: 00002aaaaaac53c0(0000) GS:ffffffff805c6880(0000) knlGS:0000000000000000
> [ 59.385260] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> [ 59.429103] CR2: 0000003d49a92660 CR3: 000000007d1c3000 CR4: 00000000000006e0
> [ 59.477671] Process modprobe (pid: 2042, threadinfo ffff81007fb38000, task ffff81007c001060)
> [ 59.530809] Stack: ffffffff88114d8a ffff810037cae1b0 0000000000000000 0000000000040000
> [ 59.557613] 0000000000004283 0000000000000016 ffffffff8811ac60 ffff810037cae1b0
> [ 59.609531] 0000000000000004 0000000000000002
> [ 59.651373] Call Trace:<ffffffff88114d8a>{:ehci_hcd:ehci_hub_control+90} <ffffffff80257d38>{pci_bus_read_config_word+136}
> [ 59.713317] <ffffffff80257c84>{pci_bus_read_config_byte+116} <ffffffff8811555d>{:ehci_hcd:ehci_port_power+157}
> [ 59.775028] <ffffffff8811590d>{:ehci_hcd:ehci_pci_reinit+909} <ffffffff88117724>{:ehci_hcd:ehci_pci_reset+1156}
> [ 59.837778] <ffffffff8030af1f>{pci_conf1_read+223} <ffffffff88008ee5>{:usbcore:usb_add_hcd+117}
> [ 59.896527] <ffffffff8030a9ce>{pcibios_set_master+30} <ffffffff88012a4d>{:usbcore:usb_hcd_pci_probe+653}
> [ 59.958237] <ffffffff8025c639>{pci_device_probe+89} <ffffffff802b867d>{driver_probe_device+77}
> [ 60.017091] <ffffffff802b8760>{__driver_attach+0} <ffffffff802b87a0>{__driver_attach+64}
> [ 60.074566] <ffffffff802b8760>{__driver_attach+0} <ffffffff802b7a49>{bus_for_each_dev+73}
> [ 60.132538] <ffffffff802b7f80>{bus_add_driver+128} <ffffffff8025c130>{__pci_register_driver+160}
> [ 60.192379] <ffffffff80150a22>{sys_init_module+258} <ffffffff8010dcee>{system_call+126}
I think so. Can people test the following patch to make sure it fixes
the issue for them, before I send it to Linus?
thanks,
greg k-h
------------------
From: David Brownell <david-b@xxxxxxxxxxx>
Subject: USB: ehci fixups
Rename the EHCI "reset" routine so it better matches what it does (setup);
and move the one-time data structure setup earlier, before doing anything
that implicitly relies on it having been completed already.
From: David Brownell <david-b@xxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
drivers/usb/host/ehci-pci.c | 19 ++++++++++++-------
1 file changed, 12 insertions(+), 7 deletions(-)
--- gregkh-2.6.orig/drivers/usb/host/ehci-pci.c
+++ gregkh-2.6/drivers/usb/host/ehci-pci.c
@@ -121,8 +121,8 @@ static int ehci_pci_reinit(struct ehci_h
return 0;
}
-/* called by khubd or root hub (re)init threads; leaves HC in halt state */
-static int ehci_pci_reset(struct usb_hcd *hcd)
+/* called during probe() after chip reset completes */
+static int ehci_pci_setup(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
@@ -141,6 +141,11 @@ static int ehci_pci_reset(struct usb_hcd
if (retval)
return retval;
+ /* data structure init */
+ retval = ehci_init(hcd);
+ if (retval)
+ return retval;
+
/* NOTE: only the parts below this line are PCI-specific */
switch (pdev->vendor) {
@@ -154,7 +159,8 @@ static int ehci_pci_reset(struct usb_hcd
/* AMD8111 EHCI doesn't work, according to AMD errata */
if (pdev->device == 0x7463) {
ehci_info(ehci, "ignoring AMD8111 (errata)\n");
- return -EIO;
+ retval = -EIO;
+ goto done;
}
break;
case PCI_VENDOR_ID_NVIDIA:
@@ -207,9 +213,8 @@ static int ehci_pci_reset(struct usb_hcd
/* REVISIT: per-port wake capability (PCI 0x62) currently unused */
retval = ehci_pci_reinit(ehci, pdev);
-
- /* finish init */
- return ehci_init(hcd);
+done:
+ return retval;
}
/*-------------------------------------------------------------------------*/
@@ -344,7 +349,7 @@ static const struct hc_driver ehci_pci_h
/*
* basic lifecycle operations
*/
- .reset = ehci_pci_reset,
+ .reset = ehci_pci_setup,
.start = ehci_run,
#ifdef CONFIG_PM
.suspend = ehci_pci_suspend,
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/