RE: Errors while booting the newly built 2.6.12 kernel??

[Mukund JB.]

Dear Arjun,
Thanks for your quick response
After I compiled the kernel, I verified the 'initrd-2.6.12.img' and it was present. 
But it is 10000 bytes less than the initial FC4 initrd img.

I did the following steps to build the kernel:

Copied the existing '.config' file from the old kernel and copied to the 2.6.12 kernel base directory.
Then,
# make
# make modules
# make modules_install
# make install

Is there is any thing additional needed for building the kernels in 2.6.x kernels?
I verified the support for inbuilt ext3 too and its present too.
What else could be the problem area?

Thanks & Regards,
Mukund Jampala


-----Original Message-----
From: Arjan van de Ven [mailto:arjan@xxxxxxxxxxxxx]
Sent: Monday, December 12, 2005 12:54 PM
To: Mukund JB.
Cc: linux-kernel@xxxxxxxxxxxxxxx
Subject: Re: Errors while booting the newly built 2.6.12 kernel??


On Mon, 2005-12-12 at 12:44 +0530, Mukund JB. wrote:
> Dear Kernel Team,
> 
> I am facing a strange error after I compiled the Linux kernel-2.6.12(downloaded from kernel.org).
> Please see the errors I get when I try to boot the newly built 2.6.12 kernel.
> 
> I found lot of members in the groups discussing this and no definite solution is suggestion.

you forgot to make an initrd.


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/