Re: [PATCH 2.6] Altix - ioc3 serial support

[Patrick Gefre]

Russell King wrote:
> On Wed, Jan 04, 2006 at 03:00:46PM -0600, Patrick Gefre wrote:
>
> > There hasn't been any further comments on this - I'm guessing it's ready to 
> > go.
>
>
> Have you addressed my comments? 

Yup - here's the email I sent out on 20-Dec, you must of missed it:






Thanks for the review Russell. I've updated my patch - my comments
follow.




On Fri, 16 Dec 2005, Russell King wrote:

+ On Fri, Dec 16, 2005 at 04:33:26PM -0600, Pat Gefre wrote:
+ > The following patch adds driver support for a 2 port PCI IOC3-based
+ > serial card on Altix boxes:
+ >
+ > ftp://oss.sgi.com/projects/sn2/sn2-update/044-ioc3-support
+
+ Here's some comments on ioc3_serial.c.  Could you look at them and
+ either resolve them or discuss further.  Thanks.
+
+ +#include <linux/serialP.h>
+
+ I don't think you need this include.

Deleted.


+
+ +	the_port->timeout = ((the_port->fifosize * HZ * bits) / (baud / 10));
+ +	the_port->timeout += HZ / 50;	/* Add .02 seconds of slop */
+
+ Please use uart_update_timeout() instead.


OK - done.


+
+ +	info = the_port->info;
+ +	if (info->tty) {
+ +		set_bit(TTY_IO_ERROR, &info->tty->flags);
+ +		clear_bit(TTY_IO_ERROR, &info->tty->flags);
+ +		if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+ +			info->tty->alt_speed = 57600;
+ +		if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+ +			info->tty->alt_speed = 115200;
+ +		if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+ +			info->tty->alt_speed = 230400;
+ +		if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+ +			info->tty->alt_speed = 460800;
+ +	}
+
+ None of this is required.  info->tty->alt_speed is not used by the
+ serial layer - it knows how to deal with this itself.  Secondly,
+ setting and clearing TTY_IO_ERROR is pointless.  Note that the serial
+ layer takes care of TTY_IO_ERROR handling for you.


OK - done.


+
+ +	/* set the speed of the serial port */
+ +	ioc3_change_speed(the_port, info->tty->termios, (struct termios *)0);
+
+ serial_core will call this for you at the appropriate time.  Note that
+ you decided above to check whether info->tty was NULL.  If it was this
+ will oops.  Better just get rid of it anyway - it's not necessary.


OK - done.


+
+ +					/* Notify upper layer of carrier drop */
+ +					if ((port->ip_notify & N_DDCD)
+ +					    && port->ip_port) {
+ +						the_port->icount.dcd = 0;
+ +						wake_up_interruptible
+ +						    (&the_port->info->
+ +						     delta_msr_wait);
+ +					}
+
+ Use uart_handle_dcd_change().  Setting port->icount.dcd to zero in
+ this case is wrong.  It also makes no attempt at informing the upper
+ layers that a hangup occurred.  Note that uart_handle_dcd_change()
+ exists so that you don't have to think about these semantics.  You
+ will need to keep the wake_up_interruptible though.


OK - done.


+
+ +			if ((port->ip_notify & N_DDCD)
+ +			    && (shadow & SHADOW_DCD)
+ +			    && (port->ip_port)) {
+ +				the_port = port->ip_port;
+ +				the_port->icount.dcd = 1;
+ +				wake_up_interruptible
+ +				    (&the_port->info->delta_msr_wait);
+
+ Ditto.  icount.dcd is not the state of DCD.  It is a counter for the
+ number of times DCD changes state.


OK - done.


+
+ +			if ((port->ip_notify & N_DCTS) && (port->ip_port)) {
+ +				the_port = port->ip_port;
+ +				the_port->icount.cts =
+ +				    (shadow & SHADOW_CTS) ? 1 : 0;
+ +				wake_up_interruptible
+ +				    (&the_port->info->delta_msr_wait);
+ +			}
+
+ Ditto, except uart_handle_cts_change().


OK - done.


+
+ +		the_port->lock = SPIN_LOCK_UNLOCKED;
+ +		spin_lock_init(&the_port->lock);
+
+ Not necessary - uart_add_one_port() does this for you for non-console
+ ports, and for console ports, it is assumed that the console code has
+ already initialised the spinlock.
+


OK - done.


+ +	if (request_count > TTY_FLIPBUF_SIZE - tty->flip.count)
+ +		request_count = TTY_FLIPBUF_SIZE - tty->flip.count;
+ +
+ +	if (request_count > 0) {
+ +		read_count = do_read(the_port, ch, request_count);
+ +		if (read_count > 0) {
+ +			flip = 1;
+ +			memcpy(tty->flip.char_buf_ptr, ch, read_count);
+ +			memset(tty->flip.flag_buf_ptr, TTY_NORMAL, read_count);
+ +			tty->flip.char_buf_ptr += read_count;
+ +			tty->flip.flag_buf_ptr += read_count;
+ +			tty->flip.count += read_count;
+ +			the_port->icount.rx += read_count;
+ +		}
+ +	}
+
+ Please talk to Alan Cox about the best way to handle this.  flip
+ buffers are going away.

Here's Alan's email:

From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>

>> Something like this. As we now do kmalloc buffering you don't really
>> need to worry about overruns. If you want to detect/report them then
>> tty_insert_flip_string returns the bytes queued.
>>
>> tty_buffer_request_room is a hint to help the kernel manage buffers
>> better.
>>
>>
>>         read_count = do_read(the_port, ch, SOME_CONSTANT_EG_4K);
>>         if(read_count) {
>>                 tty_buffer_request_room(tty, read_count);
>>                 tty_insert_flip_string(tty, ch, read_room);
>>                 tty_flip_buffer_push(tty);
>>         }
>>


Done.



+
+ +/**
+ + * ic3_tx_empty - Is the transmitter empty?  We pretend we're always empty
+ + * @port: Port to operate on (we ignore since we always return 1)
+ + *
+ + */
+ +static unsigned int ic3_tx_empty(struct uart_port *the_port)
+ +{
+ +	return TIOCSER_TEMT;
+ +}
+
+ Not really a good idea if you care about the last bytes of data
+ in various buffers.  Eg, cat file > /dev/yourport could well chop
+ off the last few characters for transmission.

Yeah. This is something I should of fixed already. There is a shadow
register for this.


+
+ Finally, you register the uart driver in ioc3uart_init(), and
+ unregister it in ioc3uart_remove() rather than ioc3uart_exit().
+ What if you have multiple boards?  You remove one of them and
+ the uart driver gets unregistered?  It doesn't look sane.

Right. Thanks for pointing this out.


Thanks again for the review.

-- Pat
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/