Re: bad pmd filemap.c, oops; 2.4.30 and 2.4.32

[Chris Stromsoe]

On Sat, 31 Dec 2005, Willy Tarreau wrote:
> On Sat, Dec 31, 2005 at 12:08:21PM +0000, Alan Cox wrote:
> > On Gwe, 2005-12-30 at 17:48 -0800, Chris Stromsoe wrote:
> > > scsi0:0:0:0: Attempting to queue an ABORT message CDB: 0x12 0x0 0x0 
> > > 0x0 0xff 0x0 scsi0:0:0:0: Command already completed aic7xxx_abort 
> > > returns 0x2002
> >
> > IRQ routing by the look of that trace. Make sure that if you are using 
> > 2.4.x you have ACPI disabled and see it looks any better
>
> Correct, and I came to the same conclusion ; Chris told us he booted 
> with the "nosmp" option. I've checked his config, and he has 
> CONFIG_ACPI_BOOT=y. I've just tried the same here, and I confirm that my 
> machine (dual athlon) does not boot with "nosmp" unless I also add 
> "acpi=off". Mine even stops ealier, while scanning IDE devices.

2.6.14.4 has been running stable for 4 days.  For the long term, I'll 
probably migrate the box to 2.6 and leave it there.

> So now we're back to the original problem, i.e. why does he get bad pmd
> that often on 2.4. It leaves us with the following possible next steps
> after the problem occurs again (if it still happens with 2.6.14 or if
> Chris is OK for a few more tests) :
>  - 2.4.32 nosmp acpi=off       => the easiest one
>  - 2.4.32 + aic7xxx+20040522   => the more interesting one

I booted 2.4.32 with the aic7xxx patch you pointed me at last week.  It's 
been up for a few hours.  I'll let it run for at least a week or two and 
will report back positive or negative results.  After that, I'll try 
2.4.32 with nosmp and acpi=off.


-Chris
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/