[2.6 patch] spelling: s/retreive/retrieve/

From: Adrian Bunk
Date: Fri Jan 06 2006 - 11:32:40 EST

Next message: Adrian Bunk: "[2.6 patch] spelling: s/trough/through/"
Previous message: David Howells: "[PATCH 4/17] FRV: Implement and export various things required by modules"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Signed-off-by: Adrian Bunk <bunk@xxxxxxxxx>

---

Documentation/i2o/ioctl | 2 +-
arch/powerpc/kernel/prom.c | 2 +-
arch/powerpc/kernel/rtas.c | 2 +-
arch/powerpc/kernel/setup_64.c | 2 +-
arch/powerpc/mm/hash_utils_64.c | 2 +-
arch/powerpc/platforms/powermac/cpufreq_64.c | 2 +-
drivers/macintosh/therm_pm72.c | 4 ++--
drivers/macintosh/windfarm_pm81.c | 2 +-
drivers/message/i2o/README.ioctl | 2 +-
drivers/net/hp100.c | 2 +-
drivers/usb/serial/cypress_m8.c | 2 +-
drivers/video/aty/radeon_monitor.c | 2 +-
drivers/video/logo/Makefile | 2 +-
fs/9p/vfs_inode.c | 2 +-
include/asm-powerpc/smu.h | 6 +++---
scripts/Makefile.modpost | 2 +-
scripts/mksysmap | 2 +-
17 files changed, 20 insertions(+), 20 deletions(-)

--- linux-2.6.15-mm1-full/arch/powerpc/kernel/prom.c.old 2006-01-06 16:46:53.000000000 +0100
+++ linux-2.6.15-mm1-full/arch/powerpc/kernel/prom.c 2006-01-06 16:47:04.000000000 +0100
@@ -972,7 +972,7 @@
#endif

#ifdef CONFIG_PPC_RTAS
- /* To help early debugging via the front panel, we retreive a minimal
+ /* To help early debugging via the front panel, we retrieve a minimal
* set of RTAS infos now if available
*/
{
--- linux-2.6.15-mm1-full/arch/powerpc/kernel/rtas.c.old 2006-01-06 16:47:12.000000000 +0100
+++ linux-2.6.15-mm1-full/arch/powerpc/kernel/rtas.c 2006-01-06 16:47:18.000000000 +0100
@@ -632,7 +632,7 @@
}

/*
- * Call early during boot, before mem init or bootmem, to retreive the RTAS
+ * Call early during boot, before mem init or bootmem, to retrieve the RTAS
* informations from the device-tree and allocate the RMO buffer for userland
* accesses.
*/
--- linux-2.6.15-mm1-full/arch/powerpc/kernel/setup_64.c.old 2006-01-06 16:47:34.000000000 +0100
+++ linux-2.6.15-mm1-full/arch/powerpc/kernel/setup_64.c 2006-01-06 16:47:39.000000000 +0100
@@ -438,7 +438,7 @@

/*
* Fill the ppc64_caches & systemcfg structures with informations
- * retreived from the device-tree. Need to be called before
+ * retrieved from the device-tree. Need to be called before
* finish_device_tree() since the later requires some of the
* informations filled up here to properly parse the interrupt
* tree.
--- linux-2.6.15-mm1-full/arch/powerpc/mm/hash_utils_64.c.old 2006-01-06 16:47:47.000000000 +0100
+++ linux-2.6.15-mm1-full/arch/powerpc/mm/hash_utils_64.c 2006-01-06 16:47:52.000000000 +0100
@@ -368,7 +368,7 @@
unsigned long mem_size, rnd_mem_size, pteg_count;

/* If hash size isn't already provided by the platform, we try to
- * retreive it from the device-tree. If it's not there neither, we
+ * retrieve it from the device-tree. If it's not there neither, we
* calculate it now based on the total RAM size
*/
if (ppc64_pft_size == 0)
--- linux-2.6.15-mm1-full/arch/powerpc/platforms/powermac/cpufreq_64.c.old 2006-01-06 16:48:00.000000000 +0100
+++ linux-2.6.15-mm1-full/arch/powerpc/platforms/powermac/cpufreq_64.c 2006-01-06 16:48:05.000000000 +0100
@@ -79,7 +79,7 @@
};

/* Power mode data is an array of the 32 bits PCR values to use for
- * the various frequencies, retreived from the device-tree
+ * the various frequencies, retrieved from the device-tree
*/
static u32 *g5_pmode_data;
static int g5_pmode_max;
--- linux-2.6.15-mm1-full/Documentation/i2o/ioctl.old 2006-01-06 16:48:14.000000000 +0100
+++ linux-2.6.15-mm1-full/Documentation/i2o/ioctl 2006-01-06 16:48:19.000000000 +0100
@@ -185,7 +185,7 @@
ENOMEM Kernel memory allocation error

A return value of 0 does not mean that the value was actually
- properly retreived. The user should check the result list
+ properly retrieved. The user should check the result list
to determine the specific status of the transaction.

VIII. Downloading Software
--- linux-2.6.15-mm1-full/drivers/macintosh/therm_pm72.c.old 2006-01-06 16:48:27.000000000 +0100
+++ linux-2.6.15-mm1-full/drivers/macintosh/therm_pm72.c 2006-01-06 16:48:39.000000000 +0100
@@ -630,12 +630,12 @@
sprintf(nodename, "/u3@0,f8000000/i2c@f8001000/cpuid@a%d", cpu ? 2 : 0);
np = of_find_node_by_path(nodename);
if (np == NULL) {
- printk(KERN_ERR "therm_pm72: Failed to retreive cpuid node from device-tree\n");
+ printk(KERN_ERR "therm_pm72: Failed to retrieve cpuid node from device-tree\n");
return -ENODEV;
}
data = (u8 *)get_property(np, "cpuid", &len);
if (data == NULL) {
- printk(KERN_ERR "therm_pm72: Failed to retreive cpuid property from device-tree\n");
+ printk(KERN_ERR "therm_pm72: Failed to retrieve cpuid property from device-tree\n");
of_node_put(np);
return -ENODEV;
}
--- linux-2.6.15-mm1-full/drivers/macintosh/windfarm_pm81.c.old 2006-01-06 16:48:48.000000000 +0100
+++ linux-2.6.15-mm1-full/drivers/macintosh/windfarm_pm81.c 2006-01-06 16:48:52.000000000 +0100
@@ -26,7 +26,7 @@
* (typically the drive fan)
* - the main control (first control) gets the target value scaled with
* the first pair of factors, and is then modified as below
- * - the value of the target of the CPU Fan control loop is retreived,
+ * - the value of the target of the CPU Fan control loop is retrieved,
* scaled with the second pair of factors, and the max of that and
* the scaled target is applied to the main control.
*
--- linux-2.6.15-mm1-full/drivers/message/i2o/README.ioctl.old 2006-01-06 16:49:00.000000000 +0100
+++ linux-2.6.15-mm1-full/drivers/message/i2o/README.ioctl 2006-01-06 16:49:05.000000000 +0100
@@ -185,7 +185,7 @@
ENOMEM Kernel memory allocation error

A return value of 0 does not mean that the value was actually
- properly retreived. The user should check the result list
+ properly retrieved. The user should check the result list
to determine the specific status of the transaction.

VIII. Downloading Software
--- linux-2.6.15-mm1-full/drivers/net/hp100.c.old 2006-01-06 16:49:18.000000000 +0100
+++ linux-2.6.15-mm1-full/drivers/net/hp100.c 2006-01-06 16:49:23.000000000 +0100
@@ -277,7 +277,7 @@
* Convert an address in a kernel buffer to a bus/phys/dma address.
* This work *only* for memory fragments part of lp->page_vaddr,
* because it was properly DMA allocated via pci_alloc_consistent(),
- * so we just need to "retreive" the original mapping to bus/phys/dma
+ * so we just need to "retrieve" the original mapping to bus/phys/dma
* address - Jean II */
static inline dma_addr_t virt_to_whatever(struct net_device *dev, u32 * ptr)
{
--- linux-2.6.15-mm1-full/drivers/usb/serial/cypress_m8.c.old 2006-01-06 16:49:31.000000000 +0100
+++ linux-2.6.15-mm1-full/drivers/usb/serial/cypress_m8.c 2006-01-06 16:49:37.000000000 +0100
@@ -357,7 +357,7 @@
} while (retval != 5 && retval != ENODEV);

if (retval != 5) {
- err("%s - failed to retreive serial line settings - %d", __FUNCTION__, retval);
+ err("%s - failed to retrieve serial line settings - %d", __FUNCTION__, retval);
return retval;
} else {
spin_lock_irqsave(&priv->lock, flags);
--- linux-2.6.15-mm1-full/drivers/video/aty/radeon_monitor.c.old 2006-01-06 16:49:47.000000000 +0100
+++ linux-2.6.15-mm1-full/drivers/video/aty/radeon_monitor.c 2006-01-06 16:49:51.000000000 +0100
@@ -423,7 +423,7 @@
/*
* Probe display on both primary and secondary card's connector (if any)
* by various available techniques (i2c, OF device tree, BIOS, ...) and
- * try to retreive EDID. The algorithm here comes from XFree's radeon
+ * try to retrieve EDID. The algorithm here comes from XFree's radeon
* driver
*/
void __devinit radeon_probe_screens(struct radeonfb_info *rinfo,
--- linux-2.6.15-mm1-full/drivers/video/logo/Makefile.old 2006-01-06 16:49:59.000000000 +0100
+++ linux-2.6.15-mm1-full/drivers/video/logo/Makefile 2006-01-06 16:50:04.000000000 +0100
@@ -16,7 +16,7 @@

# How to generate logo's

-# Use logo-cfiles to retreive list of .c files to be built
+# Use logo-cfiles to retrieve list of .c files to be built
logo-cfiles = $(notdir $(patsubst %.$(2), %.c, \
$(wildcard $(srctree)/$(src)/*$(1).$(2))))

--- linux-2.6.15-mm1-full/fs/9p/vfs_inode.c.old 2006-01-06 16:50:12.000000000 +0100
+++ linux-2.6.15-mm1-full/fs/9p/vfs_inode.c 2006-01-06 16:50:17.000000000 +0100
@@ -663,7 +663,7 @@
}

/**
- * v9fs_vfs_getattr - retreive file metadata
+ * v9fs_vfs_getattr - retrieve file metadata
* @mnt - mount information
* @dentry - file to get attributes on
* @stat - metadata structure to populate
--- linux-2.6.15-mm1-full/include/asm-powerpc/smu.h.old 2006-01-06 16:50:26.000000000 +0100
+++ linux-2.6.15-mm1-full/include/asm-powerpc/smu.h 2006-01-06 16:50:44.000000000 +0100
@@ -22,7 +22,7 @@
/*
* Partition info commands
*
- * These commands are used to retreive the sdb-partition-XX datas from
+ * These commands are used to retrieve the sdb-partition-XX datas from
* the SMU. The lenght is always 2. First byte is the subcommand code
* and second byte is the partition ID.
*
@@ -225,7 +225,7 @@
*
* SMU_CMD_MISC_ee_GET_DATABLOCK_REC is used, among others, to
* transfer blocks of data from the SMU. So far, I've decrypted it's
- * usage to retreive partition data. In order to do that, you have to
+ * usage to retrieve partition data. In order to do that, you have to
* break your transfer in "chunks" since that command cannot transfer
* more than a chunk at a time. The chunk size used by OF is 0xe bytes,
* but it seems that the darwin driver will let you do 0x1e bytes if
@@ -556,7 +556,7 @@
__u32 cmdtype;
#define SMU_CMDTYPE_SMU 0 /* SMU command */
#define SMU_CMDTYPE_WANTS_EVENTS 1 /* switch fd to events mode */
-#define SMU_CMDTYPE_GET_PARTITION 2 /* retreive an sdb partition */
+#define SMU_CMDTYPE_GET_PARTITION 2 /* retrieve an sdb partition */

__u8 cmd; /* SMU command byte */
__u8 pad[3]; /* padding */
--- linux-2.6.15-mm1-full/scripts/Makefile.modpost.old 2006-01-06 16:50:52.000000000 +0100
+++ linux-2.6.15-mm1-full/scripts/Makefile.modpost 2006-01-06 16:50:57.000000000 +0100
@@ -30,7 +30,7 @@
# - See include/linux/module.h for more details

# Step 4 is solely used to allow module versioning in external modules,
-# where the CRC of each module is retreived from the Module.symers file.
+# where the CRC of each module is retrieved from the Module.symers file.

.PHONY: _modpost
_modpost: __modpost
--- linux-2.6.15-mm1-full/scripts/mksysmap.old 2006-01-06 16:51:05.000000000 +0100
+++ linux-2.6.15-mm1-full/scripts/mksysmap 2006-01-06 16:51:13.000000000 +0100
@@ -1,7 +1,7 @@
#!/bin/sh -x
# Based on the vmlinux file create the System.map file
# System.map is used by module-init tools and some debugging
-# tools to retreive the actual addresses of symbols in the kernel.
+# tools to retrieve the actual addresses of symbols in the kernel.
#
# Usage
# mksysmap vmlinux System.map

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Adrian Bunk: "[2.6 patch] spelling: s/trough/through/"
Previous message: David Howells: "[PATCH 4/17] FRV: Implement and export various things required by modules"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]